The Alphacool Aurora Acryl GPX-N RTX 3070 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3070 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3070 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3070 Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3070 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3070 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3070 Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data: L x W x H:122,5 x 169,5 x 24,5 mm Material cooler: Nickle-plated copper Material cooler top: Acryl Threads: 4 x G1/4“ Thickness cooling fins: 0,6 mm Illumination: Digital RGB LEDs Power connector Digital RGB LEDs: 3-Pin JST Power Digital RGB LEDs: 5V Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards Compatibility : - NVIDIA Geforce RTX 3070 Founders Edition Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 Founders Edition with Backplate Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 Founders Edition with Backplate
Stylischer Mini-Tower in Schwarz, perforierte Front für guten Airflow, Seitenteil aus Tempered Glass, mit Netzteilabdeckung, inkl. 1x 120-mm-Lüfter, Grafikkarten bis 297 mm, CPU-Kühler bis 158 mm
Stylischer Midi-Tower in Schwarz, Front mit RGB-Beleuchtung, inkl. 4x 120-mm-FRGB-Lüfter, Temperglas-Seitenteil, mit Netzteilabdeckung, Grafikkarten bis 317 mm und CPU-Kühler bis 157 mm
Features and Benefits Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFP) -40 to 75°C operating temperature range (T models) DIP switches to select FDX/HDX/10/100/Auto/Force Introduction The IMC-21A industrial media converters are entry-level 10/100BaseT(X) to 100BaseFX media converters designed to provide reliable and stable operation in harsh industrial environments. The converters can operate reliably in temperatures ranging from -40 to 75°C. The rugged hardware design ensures that your Ethernet equipment can withstand demanding industrial conditions. The IMC-21A converters are easy to mount on a DIN-Rail or in distribution boxes.
GNSS Antenna Frequency Range: 1575.42-1610 MHz Polarization RHCP Impedance 50 Ω LNA Gain 28 dB LNA Noise Figure < 1.5 dB Supply Voltage 2.7-5 ±0.5 VDC Current Consumption < 15 mA LNA V.S.W.R
Patch cord in highest quality for a professional connecting of network, servers in gigabit and 10 gigabit range.- Pin assignment TIA/EIA 568B2.1;- cable: SSTP PIMF 4x2xAWG26/7;- sheet halogen free, LSZH-IEC332-1, ROHS conform;- plugs 8P8C/RJ45 (50µ") with a special shape and clip protection;- blue colored plug for better differentiation;- for gigabit and 10 gigabit network applications;- 100% cat.6 test and 100% cat.6(A) test incl. test protocol;- protocol and patch cord with serial number.Kaabli pikkus3 mPistmik 1RJ-45Pistmik 2RJ-45Toote värvPunaneSuguMale/MaleKaabli tüüpCat6a
Other features: HighSpeed HDMI™ for 3D and Ultra HD up to 4K @ 50/60 Hz (2160 p) gold-plated contact surfaces for optimum signal transmission high-quality metal connectors optimised bend protection and flexible cable sleeving Connector type: HDMI™ male (type A) Connector 2: HDMI™ male (type A) Cable type: Round cable AWG wire size: 30 Cable material: CU (copper) Cable length: 5 m Type: HDMI to HDMI Embeeded battery: No WEEE tax: No Packing quantity: 1 pc(s) Gross weight: 0.42 kg Gross depth (mm): 320 mm Gross width (mm): 200 mm Gross height (mm): 20 mm Volume (m3): 0.00128 m³ Net weight: 0.38 kg Tare weight (kg): 0.04 kg
Goobay CAT-kaablid edastavad signaale tippkvaliteediga ja suure kiirusega, tagades alati stabiilse ühenduse. Meie ühenduskaablite ja pistikutega seotud tootevalikusse kuuluvad kvaliteetsed sisejuhid, tugev kaablikest ja täpselt sobivad pistikupesad. Goobay pakub alati täiuslikke tooteid teie võrguvajaduste rahuldamiseks - olenemata sellest, kas teie eesmärk on luua kodu- või ettevõtte võrk. Lihtsalt. Kõik. Mida te vajate!Eelnevalt juhtmestatud, varjestamata LAN-kaabel 2x RJ45 pistikutega võrgukomponentide ühendamiseks.Kvaliteetne vasestatud alumiiniumjuhtmestik (CCA) ja kullatud kontaktid tagavad suurepärase ja võimsa võrguühenduse.RJ45-pistiku lukustuskaitse takistab lukustuse kinnijäämist või katkemist, aidates tagada usaldusväärse internetiühenduse.Painutuskaitse ja tugev PVC-mantel kaitsevad Ethernet-kaablit tõhusalt purunemise eest.CAT 6 võrgukaabel sobib Gigabit Ethernetile kiirusega kuni 10/100/1000 Mbit/s.Võrgupesa: paaride järjestus vastavalt EIA/TIA 568B-le.
21.5"/ 54.6cm, Resolution 1920x1080, 16: 9, 102dpi, Brightness 250cd / m², Contrast 1, 000: 1 (static), 100, 000, 000: 1 (dynamic), Response time 5ms (GtG), not specified (MPRT), Angle of view 179 ° / 179 °, Panel IPS (AHVA), Panel manufacturer AU Optronics, Shape straight (flat), Coating matt (non-glare), Backlight white LED, flicker-free, blue light filter, 8bit color depth (16.8 million colors), FRC unknown, Color space not specified (sRGB), not specified (Adobe RGB), not specified (DCI-P3), not specified (REC 709), Refresh rate 75Hz, Variable synchronization Adaptive Sync, AMD FreeSync (48-75Hz via DisplayPort, 48-75Hz via HDMI, without LFC support, without HDR), Signal frequency 85-85kHz (horizontal), 48-75Hz (vertical), Connections 1x VGA, 1x HDMI 1.4, 1x DisplayPort 1.2, Audio speakers (2x 1.5W), 1x line-in, 1x line-out, Ergonomics not available (height), not available (Pivot), not available (rotation), + 23 ° / -5 ° (tilting), Color black (display frame), black (lower bezel), black (stand), black (rear), VESA 100x100 (free), Power consumption not specified (maximum), 12W (typical), not specified (energy label), 0.5W (standby), Annual consumption 17.52kWh, Energy efficiency class A + Power supply AC-In (internal power supply), Screen-to-body ratio 87.3% (calculated), Dimensions (WxHxD) 490x363x199mm (with pedestal), 490x298x53mm (without pedestal), Weight 3.00kg (with stand), 2.60kg (without stand), Special features slim bezel, mechanical keys, security lock (Kensington)
Tootja: MODECOM Tootegrupp: Hiir Hiire tüüp: Optical ühenduse tüüp: USB maksimaalne resolutsioon: 1200 - Nuppude arv: 3 rullik: 1 tk DPI switch: Ei LED backlight: Ei kaabli pikkus: 1.8 m värv: must operatsioonisüsteem: Windows, Linux
Kompakte Gaming-Tastatur, TKL-Design (65 Prozent), mechanische Switches: Cherry MX Silent Red, weiße LED-Beleuchtung, PBT-Tastenkappen, geeignet für PC und Mac
Product kirjeldus: RaidSonic ICY BOX IB-M2HS-701 - solid state drive heatsink Product Type: Solid state drive heatsink Package Content: Thermal pads mõõtmed (WxDxH): 7 cm x 2.1 cm x 0.5 cm kaal: 8 g värv: must
Toote kirjeldus inglise keeles:If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior. In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters. DEMCiflex offers a particularly easy-to-retrofit solution. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held. The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly. Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. This is very simple in many ways. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt. Finally, a few notes on the installation: First, the question arises, which fans have to be covered at all. As already mentioned, this applies exclusively to the sucking fans. But which are they? The safest way to recognize this is on the fan itself, with two arrows on the outside or inside of the fan frame. If one of the two arrows points towards the interior or if the rotor suspension is aligned with the interior, this is an aspirating fan. These are usually located on the front, side and bottom, whereas the rear and cover fans usually carry the air out of the housing and therefore need not be filtered. In order to maximize the filter effect, an overpressure in the housing can be generated. This means that more volume of air is forced into the housing than is being sucked out of the housing by other fans at the same time. This prevents air (and with it the dust) from entering the interior through other openings that may not have been filtered. If all fans are the same size, you should blow more fans into the housing than pull out. In this case, the power supply is to be counted as an additional, extracting fan, as long as it does not receive its supply (fan side) directly from the outside (occurs at floor mounting). If different fans with different sizes and speeds are used, the respective air volumes (m³ / h) in the data sheets give a good reference value, whereby in turn the total volume of the suction fans must be higher than that of the blowing out fans. Note: The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate.
Original part number MCE153 Product name Maclean MCE153 Remote Control Sockets indoor 3pcs Producer Maclean Class of product Household accessories Type of household accessory Household accessories More info
