With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible. With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation. The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. Technical specifications: Base plate material: electrolyte copper Material cover: acrylic glass Cover material: black anodized aluminum Connection terminal material: Acetal Dimensions: (LxWxH): 230 x 119 x 21 mm Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: Pressure tested: 2 bar Compatibility: Nvidia Geforce RTX 3080/3090 Scope of delivery: 1x HEATKILLER® V 1x mounting material Thermal Grizzly Kryonaut thermal paste
IMPRESSIVE ILLUMINATION, SUPERIOR COOLING Pure Loop 2 FX 240mm is the very high-performing and silent All-in-One water cooling unit with impressive ARGB illumination. Very high cooling performance for all mainstream CPUs 2 Light Wings 120mm PWM high-speed fans offer equally high air pressure and vibrant ARGB illumination Doubly decoupled PWM pump for quiet operation and minimal vibration ARGB-PWM-Hub enables synchronization of up to 6 ARGB components and PWM fans Combination of ARGB illumination, all-black design and aluminum-style for unmistakable and stylish look Easy-to-access refill port and included coolant bottle guarantee a long lifespan 3-year manufacturer’s warranty
Efficient Thermal ConductivityThe Thermal Pad based on silicone and a special filler outperforms generic and performance pads by far.Filling the GapsDue to its low hardness and great compressibility, the thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems.Easy to ApplyInstalling the ARCTIC Thermal Pad is child's play; perfect for beginners..Safe HandlingThe Pad does not contain any metallic particles, is electrically isolating and not capacitive. The handling is safe as contact with any electrical traces would not result in damage of any sort.Toote värvSinineMaterjalSilikoonPakendi laius195 mmPakendi kõrgus210 mmPakendi kaal45 gLaius145 mmSügavus0,5 mmKõrgus145 mmKaal41 g
Wenn Ihnen nur das beste gut genug ist... Mit der neuen Multiframe®-Technologie greifen wir bewusst nach der Spitze des Lüfter-Marktes! Die von uns patentierte NB-Multiframe® Technolgie bietet ein völlig neues Potenzial der Geräuschreduzierung bei Computern und Multimediageräten aller Art. Lautstärkemessungen durch den TÜV Nord bestätigen die besonders geringe Geräuschentwicklung und die klare Überlegenheit der neuen Lüfterserie! Die neue Multiframe® S-Serie ist als High End Serie auch sonst qualitativ hochwertig ausgestattet. Ein optimierter EKAPlus Antrieb mit extrem niedriger Startspannung, nahezu lautlose NB-NanoSLI® Lager und das Hightech Chassis mit Deepsounddesign sorgen für eine bisher unerreichte Laufruhe im Betrieb. Der PWM gesteuerte Highspeed Lüfter M12-P ist über die PWM Steuerung des Mainbaords von 1000 - 2000 U/min regelbar. Bei Volllast bringt der Lüfter die enorme Leistung von 133m3/h, ausreichend für jedes Setup. Auch eine manuelle Regelung von 4,5 bis 13,3 Volt ist möglich. Die Lautstärke bewegt sich von kaum wahrnehmbar bis deutlich hörbar. Natürlich ist die Lautstärke dennoch niedriger als bei jeden anderen Markenlüfter gleicher Leistung. (((NB))) - Technology - Made in Germany NB-Mulitframe® Technologie: Einzigartiges mehrteiliges Hightech Chassis mit integrierten Körperschalldämpfern. Schwingungsarmer glasfaserverstärkter Rahmen. Leise Highspeed Version mit PWM Steuerung: Extrem leistungssatrker Lüfter mit sehr gleichmäßigen Lauf, im Betrieb bis zu 30 % leiser als hochwertige Markenlüfter gleicher Leistungsklasse. Extrem niedrige Startspannung von 4,5V ! Höchste Sicherheit: Falschpol-und Überlastungsschutz, Restartfunktion, extrem ausfallsicher, 6 Jahre Garantie Extrem leise Lager extrem geräuscharme und langlebige NB-NanoSLI® Lager uvm. Extrem hochwertig und solide Hochpräzise fertigung, Materialmassierter Rahmen mit Deepsound Design Technische Details: Maße: 120x120x25 mm Nenndrehzahl: 1000 - 2000 U/min Lautstärke: 12 - 29 dB/A Förderleistung: max. 73 - 133 m³/h Spannbereich: 4,5 - 13,2 V Startspannung: 4,5 V Leistungsaufnahme: 2,64 Watt Druck: 2.838 mmH²O MTBF (25°): 130 000 std. Temperaturbereich: -10°C - 70°C Autostart Time: 3-5 sek. Garantie: 6 Jahre Lieferumfang: Noiseblocker NB-Multiframe MF12-P - PWM ( 120x120x25mm ) Dieses Produkt wurde für Sie getestet Review-Base Hardware-academy Whitex-Modd Hinweis: Bitte beachten sie den Unterschied zwischen einem 4 Pin Stromstecker (Molex) und einem 4 Pin Lüfteranschluss (PWM).
Worldwide the non-plus ultra in fan constructionPatented high-tech developed in Germany! With its own developed and patented (((Noiseblocker)))® technology, (((Noiseblocker)))® introduced a new era in fan construction in the year 2008.The Multiframe S series made by (((Noiseblocker)))®, which is generally recognised as the reference standard, is the first fan with a vibration-free fan frame and incorporates numerous other improvements, so that it is superior to standard fans in almost all aspects.In conjunction with the unique (((Noiseblocker)))® technology, our almost noise-free NB-NanoSLI® bearing and the NB-EKAPlus II drive, the NB-Multiframe® S series currently represents the best that German engineering expertise has to offer. Quality you can rely on!- A unique, multipart vibration-free chassis with integrated structure-borne sound absorbers and glass fibre-reinforced frame.- Extremely low start voltage!- Easy assembly.- NB-EKAPlus II wide-range drive with low impulse noise.- Verified technical data.- Reverse pole and overload protection, restart function, extremely failsafe, 6-year guarantee.- Almost noise-free bearings.- xtremely low-noise and long-life NB-NanoSLI® bearings.SobilikArvuti korpusTüüpVentilaatorVentilaatori läbimõõt12 cmToetatud protsessoripesadEi ole toetatudPöörlemiskiirus (max)750 RPMMüratase (suur kiirus)8 dBÕhuvool58 m³/hToote värvMustPinge6Laius120 mmSügavus120 mmKõrgus25 mm
Full cover water block for ASUS GeForce RTX 3080 ROG Strix and ASUS GeForce RTX 3090 ROG Strix graphics cards. Manufactured from a massive block of copper, the base of the water block covers all relevant heat sources. In the GPU area, a jet plate made from stainless steel assures maximum cooling performance, while wide coolant channels in other areas guarantee minimum flow resistance. The top is manufactured from acrylic glass, reinforced by a black anodized aluminum frame. Thirteen individually addressable RGBpx LEDs are integrated into the water block and can be connected to an Aqua Computer device with RGBpx output or to a motherboard with a compatible output. The kryographics NEXT series retains established features of the kryographics series: Mirror finish for relevant contact areas. Direct contact to GPU and RAM, high quality thermal pad included for further components such as voltage regulators. All mounting threads are equipped with metal spacers for easy installation. Inlet and outlets ports with G1/4 thread, can be used from both sides. Two sealing screws included. Interchangeable connection terminal. Full compatibility to kryographics connection terminals with VISION module and kryoconnect SLI connectors. Compatible products for integrated RGBpx illumination: All Aqua Computer products with RGBpx output Various motherboards with connector for addressable RGB LEDs Materials: Base part: Copper Top cover: Acrylic glass Frame: Aluminum, anodized Jet plate: Stainless steel Terminal: Acetal Scope of delivery: Water block without hose connectors (threads G1/4) Two G1/4 sealing screws Thermal compound Thermal Grizzly Kryonaut, approx. 0.5 grams in syringe Plastic spatula Thermally conductive pad Mounting material RGBpx connection cable 50 cm RGBpx adapter Compatibility: Please check compatibility using the PDF from Aqua Computer under Awards and Documents. Please note: Graphics card and fittings are not included in delivery, please order separately. When using the ASUS ROG Crosshair VIII Formula motherboard, the RGBpx ports cannot be used due to the installed decorative panel.
Tootekood: PH-GB6900ASSRX_CR01_BPGTIN: 886523701705Jahutid ja lisad
Full-Block-GPU-Kühler für Custom-Wasserkühlungen, für ASUS ROG Strix/TUF AMD RX 6800/6900, Deckel aus transparentem Acrylglas, mit verchromtem Aluminium-Cover, integrierte digitale RGB-Beleuchtung (3-Pin, 5VDG)
Schicker zylindrischer Ausgleichsbehälter, Röhre aus transparentem Acryl, Aufsätze mit mattem Finish, drei Aufsätze für flexible Anschlussmöglichkeiten, schwarze Sicherungsringe aus Aluminium
Die R100A Reservoir’s der neuen ANTILA PURE-Serie von RAIJINTEK bieten einzigartige Regenbogen Effekte des A-RGB’s (5 V adressierbar) durch die eingebaute LED-Lichtkappe. Die Lösung befindet sich auf höchstem Niveau für PC-Enthusiasten und kundenspezifische PC-Modder, um ein Super-ARGB-LED-Effekt Wasser-kühlsystem zu erstellen. Die ANTILA PURE-Serie wird aus hochwertigem POM- und Echtglas hergestellt, um eine kristallklare, stabile, leise, leistungsstarke und langlebige Lösung zu bieten. Mit der ANTILA PURE-Serie können PC-Enthusiasten nicht nur ein bemerkenswert, wunderschönes Flüssigkeitskühlsystem bauen, sondern auch extern modulare Upgrades für ihr Gehäuse kombinieren. Eine robuste Montagehalterung bietet dem Benutzer auch eine zuverlässige, richtungsweisende Montagemöglichkeit und eine benutzerfreundliche Installation. Die ANTILA PURE-Serie ist das beste LED-Reservoir für Ihre Wasserkühlung Ihres Systems! Technische Daten: Anzahl: 1 Stück Dimensionen [l×b×h]: 77×77×173 mm Reservoir Dimensionen: 65×65×127 mm Kühlmittel Kapazität: 400 ml Material: POM + Glas + Aluminium + Stahl Gewicht: 740 g Schraubgewinde: G 1/4" Addressable LED: 12 LED Rainbow (4pin header, 2510 spec) – Addressable LED LED Control Method: Motherboard RGB HEADER/ Fernbedienung und RJK Control Box LED Input Connector: 4-PIN header (2.5 Crimp) LED Eingangsspannung: 5V
The NF-A15 is a premium quality quiet 140mm fan with a round frame that complies with Noctua’s AAO (Advanced Acoustic Optimisation) standard. The NF-A15’s frame Featuress 120mm mounting holes (105mm spacing) and has been enlarged to 150mm width in order to provide superior performance on today’s high-end CPU coolers. Featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 further improves the renowned quiet cooling performance of the award-winning NF-P14. Noctua’s custom designed PWM IC for fully automatic speed control and reference class SSO2 bearings guarantee superb running smoothness and excellent long-term stability. Topped off with modular cabling, a Low-Noise Adaptor and 6 years manufacturer’s warranty, the NF-A15 is a premium choice for the highest demands.Attachment screwedPower Connection PWM fan connectorFan Bearing SSOPower Input 0 - 0.96 watt(s)Voltage Range 0 - 12 VNumber of Revolutions 900 - 1200 rpmVolume 13.8 - 19.2 dB(A)Volumetric Flow 88.7 - 115.5 m3/h, 52.2 - 68 cfmDimensionsFans Fan 1 150 x 140 x 25 mm
The Protium expansion tank from Singularity Computers is a 100mm tube with a diameter of 60mm. Together with the acrylic attachments, the expansion tank reaches a height of 139mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 x 60 x 139 mm (L x W x H) Diameter: 60 mm Material: Acrylic (lid, base, reservoir), Aluminium (retention rings) Color: Black, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 100 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
Leistungsfähiger und leiser Hightech-Lüfter von Noiseblocker, im 140-mm-Format, mit bionisch optimierten Rotorblättern, hervorragender Elektronik mit PWM, max. 186 m³/h Airflow & 29,6 dB(A), mit digital adressierbaren RGB-LEDs in der Nabe
This is a Special Edition Black EK water block enclosure engineered for the latest NVIDIA® GeForce® RTX ™ 3090 Founders Edition graphics cards. The cooling engine is the evolution of the 2nd generation EK® Quantum Vector GPU water blocks. This water block enclosure is only compatible with GeForce® RTX™ 3090 Founders Edition graphics cards. Special Edition EK Water Block for Nvidia FE GeForce RTX 3090 The EK-Quantum Vector FE RTX 3090 D-RGB water block enclosure is the most complex GPU cooling solution developed by EK to date. Aside from the small form factor and unique shape of the RTX 3090 Founders Edition PCB, EK has built a hybrid cooling solution for the backplate that is so far unique to the EK-Quantum Vector FE RTX 3090 water blocks and their backplates. The water block is purpose-designed with an extremely thick copper base for high-performance, allowing it to clear all components of the densely-packed PCB and adding more heat capacity in the process. The cooling engine used in this water block is the largest we've built to date, having roughly 30% more surface area than the rest of the Vector water blocks. Build Quality Like the Magnitude CPU water block, the entirety of this water block is CNC-machined without mass-production techniques. The block's base is milled out of a 12 mm thick piece of pure electrolytic copper sourced from Europe, which is then nickel-plated, while its top is CNC-machined out of a glass-like cast Acrylic material. The external enclosure, which is not in any contact with the coolant, is machined out of a 20 mm thick solid piece of aluminum, which is afterward anodized into a black color. The included single-slot I/O shield is supplied with special screws for attaching it to the aluminum enclosure in order to even out the entire water block's weight distribution. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. Cooling Engine This Special Edition Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as cooling liquid is channeled right over these critical areas. The water block is in contact with MOSFETs and chokes to maximize cooling and minimize the chances of unwanted coil whine. The flow paths are optimized to reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The integrated Open Split-Flow cooling engine design proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry are optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. Fin array is populated by 31 microfins with 0.6 mm wide microchannels that provide exceptional cooling performance without unnecessary flow restrictions or clogging hazards. Hybrid Backplate This water block comes with an included backplate that makes sure the entire graphics card is enclosed and not at all visible. The aluminum CNC-machined backplate has a ribbed texture in order to increase surface area for additional passive cooling power. The "active" cooling part is achieved through a section of the backplate contacting the coldplate, which is then directly cooled by the liquid. The Black variant of this Special Edition water block has a natural anodized aluminum backplate. Special Terminal Design The water block is delivered with a set of connection terminals, allowing users to swap them out based on their needs. One terminal has two direct G1/4" ports on the side, while the other one is more conventional, having four G1/4" ports going through the terminal. The new design allows terminals to be directly attached to the copper cold plate of the GPU water block, making it more rigid and reducing the chances of damage. The terminal is neatly located between two prongs on the PCB, utilizing minimal space. This kind of design allows for incredible versatility, especially for Small Form Factor builds, and of course, more interesting aesthetics. D-RGB Lighting on the EK-Quantum Vector FE RTX 3090 D-RGB Water Block This water block boasts a whopping 23 individually addressable D-RGB LEDs that illuminate both the water block's interior and the terminal itself. It is compatible with all popular RGB Sync technologies from major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Technical Specification Dimensions: (LxHxW) - 213x122x29mm D-RGB cable length: 500mm D-RGB LED count: 23 D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground)
The EK-Quantum Vector RE RTX 3080/3090 GPU cooler, has been further developed based on the 2nd generation Vector series and is compatible with most reference designs of RTX 3080/3090 graphics cards. The Vector RE water block directly cools the GPU, VRAM and VRM (voltage regulation module), as the cooling fluid is routed directly over these critical areas. The copper base is much thicker than previous Vector models. The top is made almost entirely of acrylic. Since the GPU cooler does not have a backplate, it is recommended to order a matching backplate (e.g. item 1020619). Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: 220 x 124 x 20.5mm (L x H x W) Material: Copper, Acryl Threads: G1/4" Scope of Delivery: EK-Quantum Vector RE RTX 3080/3090 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility EMTEK GeForce RTX 3080 10GB Black Edition OC Gainward GeForce RTX 3080 Phoenix Gainward GeForce RTX 3080 Phoenix GS Gainward GeForce RTX 3090 Phoenix Gainward GeForce RTX 3090 Phoenix GS GALAX GeForce RTX 3080 SG (1-Click OC) (38NWM3MD99NN) GALAX GeForce RTX 3090 SG (1-Click OC) (39NSM5MD1GNA) KFA2 GeForce RTX 3080 SG (1-Click OC) (38NWM3MD99NK) KFA2 GeForce RTX 3080 SG 10GB (38NWM3MD99NK) KFA2 GeForce RTX 3090 SG (1-Click OC) (39NSM5MD1GNK) KUROUTOSHIKOU GeForce RTX 3090 24GB GALAKURO (GG-RTX3090-E24GB/TP) Palit GeForce RTX 3080 GamingPro (NED3080019IA-132AA) Palit GeForce RTX 3080 GamingPro OC (NED3080S19IA-132AA) Palit GeForce RTX 3090 GamingPro (NED3090019SB-132BA) Palit GeForce RTX 3090 GamingPro OC (NED3090S19SB-132BA) PNY GeForce RTX 3080 10GB XLR8 Gaming EPIC-X RGB Triple Fan Edition (VCG308010TFXPPB) PNY GeForce RTX 3090 24GB XLR8 Gaming EPIC-X RGB Triple Fan Edition (VCG309024TFXPPB) PNY GeForce RTX 3090 OC XLR8 Gaming Epic-X RGB Triple Fan Edition, 24GB GDDR6X, HDMI, 3x DP (VCG309024TFXMPB)
The Protium D5 pump housing from Singularity, is designed to enclose a D5 pump. Not only to look elegant, but above all to minimise pump noise. There are also openings in the cover, which are intended for cable routing. Technical Data Dimensions: 75 x 57 x 75 mm (B x H x T) Colour: Black Material: Aluminium / Steel
The Protium D5 pump housing from Singularity, is designed to enclose a D5 pump. Not only to look elegant, but above all to minimise pump noise. There are also openings in the cover, which are intended for cable routing. Technical Data Dimensions: 75 x 57 x 75 mm (B x H x T) Colour: Silver Material: Aluminium / Steel
Hightech compact fans with bionic loop rotor (BionicLoopFan®). The special wing shape triggers turbulence in the air. This physical effect reduces the volume which is based on turbulances in the air flow and reduces energy consumption. With a straightened air flow and a higher Airflow these fans usually offers a higher overall cooling capacity over classical fans . Welcome to the future! - 100% developed in Germany - TÜV-certified sound level specifications = real data - extremely low-noise bionic loop rotor - bionic deep sound fan frame - position-invariant magnetic bearing NB-NanoSLI® 2 NEW! - silent NB-EKA P2 Drive NEW! - Bayer® Makrolon® rotor with anti-dust technology - weighted reinforced fibreglass PBT frame - NB cable management with two pluggable connection cables - Perfect results for PC casing, CPU cooling systems and radiator( higher cooling power at same revolution ratel) Technical Details: Dimensions: 140 x 140 x 25mm Number of Revolutions: 900 rpm Connection: 3 Pin Start / nominal voltage: 4.5V / 12V Volume: 16.9 dB(A) Performance: 109.2 m³ Scope of Delivery: 4 fine thread screws and knurled nuts for tool free assembly 4 NB silicone slics for vibration-free assembly each 2x 20 and 50 cm connection cable with textile sheath
Schicker zylindrischer Ausgleichsbehälter, Röhre und Aufsätze aus transparentem Acryl, drei Aufsätze für flexible Anschlussmöglichkeiten, schwarze Sicherungsringe aus Aluminium
Gross depth (mm): 1200.00 mm Gross height (mm): 25.00 mm Gross weight: 0.16 kg Gross width (mm): 120.00 mm Net weight: 0.14 kg Packing quantity: 1.00 pc(s) Paper/Pasteboard: 20.00 g Tare weight (kg): 0.02 kg Volume (m3): 0.00 m³ Embeeded battery: No WEEE tax: No
Go cooler than cool with the ROG Ryujin III. Its roomy 3.5-inch LCD screen displays live system stats or your custom artwork and animated GIFs. Underneath, an embedded fan upgraded with Axial-tech improves motherboard VRM thermals by up to 35 Celsius, and an 8th Gen Asetek pump and coldplate combine to deliver even lower CPU temperatures. Liquid is piped in through generously long braided tubing and chilled by a higher capacity radiator and three famously quiet 120 mm Noctua fans.
All-In-One-Wasserkühlung in Weiß, 240-mm-Radiator, zwei 120-mm-ARGB-Lüfter, 3 austauschbare Pumpendeckel, Unendlichkeitsspiegel-Effekt, schönes Design und leiser Betrieb, angewinkelte Fittinge frei drehbar, kompatibel zu Sockeln von AMD und Intel (inkl. LGA 1700)
The None Chamfer Brass Hard Tube in the color shiny black from Bitspower, is made of brass. With this durable tube, as well as the stylish color, high quality and unique water cooling can be created. As with other Hard Tubes, the tube can be cut or bent for the WaKü. The latter however with tube bending tool and for experienced hobbyists. As a rule, the None Chamfer does not need to be reworked when it is cut. The tube measures 300mm in length, 12mm in outer diameter and 10.6mm in inner diameter. It has a wall thickness of 0.7mm and is therefore very stable. C47, C48 and the ML series from Bitspower are compatible as connectors. Technical Data: Material: Brass Color: Shiny Black Material Thickness: 0.7 mm Outer Diameter: 12 mm Inner Diameter: 10,60 mm Length: 300 mm Compatibility: C47, C48 & ML series Bitspower connectors only
