Good quality doesn't have to cost a fortune as the Rev.3.00 of the Ultra Silent fan series from (((NB))) proves. The ideal compromise between noise level and power together with the great proce have made the BlackSilent fan series the best-selling fan series on the market. With the XLP we bring a PWM-controlled high-powered version which allows fan speed control via a Mainboard according to Intel(c) specifications. The new revision 3.00 with gloss-finished dust-repelling fan blades, NB-SLICS vibration absorbers as well as many improvements in detail and an extended warranty of 3 years! Compare yourself and find out why the BlackSilent fan series is the best-selling fan series! Outstanding quality - developed in Germany! Original (((Noiseblocker))) quality: Powerful PWM-controlled fan - reliable, long-lived and silent Long-lasting silence: Perfectly adapted speed for Power PCs - Outstandingly silent in its class, and that over a long lifespan Highest safety: Almost inaudible and extremely long-lived NB-Longlife floating bearings of modern design and the high-grade NB-EKA motor result in an unbeatable failure rate of only 0,01% Great price & Cool performance Incl. NB-Slics (vibration absorbers) Technical details: Dimensions : 120x120x25mm Weight : 125g Nominal voltage : 12-13,2 V Starting voltage :
High-end in classic design Developed with and for the most demanding customers, the new (((NB))) Premium fan series, equipped with classic frame and rotor, combines the NB-BlackSilentPro series technology with a classic design. The high-grade NB-EKA Plus II drive system and the virtually inaudible NB-NanoSLI bearings ensure exceptionally quiet operation over the whole lifespan. Both are features which before were only available in the highly sophisticated Multiframe reference series. Besides the tasteful design in matte and high-gloss black, the BlackSilentPro fans feature individually expandable cable management and a NB-Silentframe silicone gasket as well as mounting material for vibration- and tool-free installation. Quality designed in Germany! Detailed information: High-quality fibreglass reinforced chassis in classic deign with Antidust Polycarbonate rotor Cable management, plug-in cables, 20+50cm combinable Vibration- and tool-free mounting Extremely low starting voltage Pulse-noise reduced NB-EKAPLus II Wide range drive Highest safety level: Reverse polarity and overload protection, restarting functionality, extremely fail-safe Virtually inaudible bearings Highest quality: Including mounting material and additional NB-Silentframe gasket Technical specifications: Dimensions: 92x92x25mm Colours: Black frame, transparent brown fan blades Nominal voltage: 12V Starting voltage: 5V Control range: 5-13.2V Power consumption: 1.30W Nominal speed: 500-1800rpm (+/- 10%) Airflow: 14m³/h / 8,2CFM - 65m³/h / 37,6 CFM Noise emissions: 3-20 dB(A) MTBF (25°C): 180000hrs Connector: 3-Pin Extent of delivery: 1x Fan
Suurus:120 L x 120 W x 25 H mm tööpinge:3,5-13,8 V testitud:12V õhuvool:98 m3/h õhusurve:1,450 mm/H20 müratase:23,9 dBA kiirus:1500 RPM võimsustarve:1,80 W eestikeelne ülevaade:http://youtu.be/HnuOvu39nqk tootjalehel:http://www.blacknoise.com/en/products/it/17/Noiseblocker-NB_BlackSilentFan_120mm
This temperature sensor is equipped with G1/4" inner threads on both sides to allow maximum flexibility. The temperature sensor can therefore be equipped with most fittings on the market, allowing the use with almost any hose size. The sensor connection cable has a length of 60cm and a 2-Pin connector. Technical specifications: Connection threads: 2x G1/4"Main body: Nickel coated brassCover ring: Delrin Compatible with: aquaduct-versions with external sensor input (360 XT, 720 XT)Sensor Inputs of many Mainboardsaquaero 3.07, aquaero 4.00aquastream XT UltraAlphacool HeatmasterInnovatek Fan-O-MaticLian Li MultipanelScythe KazeT-Balancer
Toote kirjeldus inglise keeles:To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a black glossy nickel plated, straight adapter with two G1 / 4-inch external threads. The special feature: The length of the adapter can be flexibly adjusted between 41 and 69 mm (measured without thread). For this purpose, only one nut is loosened, one side pulled out as desired and then fixed again with the union nut. Technical details:Material: brass, black nickel platedConnections: male thread: 2x G1 / 4 inchLength: 41 - 69 mm (variable)
The Alphacool “Eiszeit” is a compressor cooler with a maximum cooling power of 1500W. Unlike most so-called Chillers or circulating coolers, the Eiszeit has a high-performance integrated pump. Highlights Integrated pump with 10m head and 600L per hour. Cooling power of 1500W Cooling can be regulated in 0.3 Kelvin increments. Large reservoir with 9L capacity All connectors fit standard G1/4” threads With the “Eiszeit”, you get a compressor cooler designed by Alphacool. With it, you can keep your system – or more than one system – at a temperature you pre-set, automatically regulated for you. The Eiszeit has a maximum cooling power of 1500W. Entering your settings is easily done through the Eiszeit’s display, and you can set the temperature in precise increments of 0.3° Kelvin. If necessary, you can reach temperatures far below room temperature. Another highlight is the integrated high-performance pump with a maximum head of 10m. This means a separate pump is no longer necessary. If the pump performance proves to be too strong, a restrictor can be integrated into the cooling loop via a ball valve or check valve. The G1/4” connectors can fit nearly all standard water cooling attachments. This gives the Eiszeit outstanding compatibility compared to other current products like CPU coolers and graphics card coolers. The Eiszeit also has security functions, such as surge protection for the compressor and an alarm indicating the flow rate is too low or the temperature is too high. Using the Eiszeit is relatively simple. After connecting it to the cooling loop, the loop needs to be filled via the fill port on top of the Eiszeit. The integrated reservoir holds 9L; additionally, you will need enough coolant to fill the complete loop. ATTENTION The temperature can NOT be set below 20 ° C. Technical Details Voltage: 230V Frequency: 50Hz Current: 2.4~3.3A Power consumption: 660W Compressor power: 0.49/0.57KW (0.66/0.77HP) Refrigeration capacity: 1.41/1.70KW Refrigerant: R-134a Refrigerant charge: 380g Precision: ±0.3℃ Reducer: Capillary Protection: Surge protection for compressor, flow alarm, high temperature alarm Pump power: 0.03KW Tank capacity: 9L Inlet and outlet: G1/4 Inner threads connector Max. Lift: 10 meters Max. Flow: 10 L/min Net weight: 29Kgs Noise level: 65 db(A) Dimensions (LxWxH): 560 x 280 x 470mm Materials Reservoir: Polypropylene Tube soft: Silicone Tube hard: PU Scope of Delivery Alphacool Eiszeit 2000 Chiller - black Manual in multiple language Alarm output connector UK power plug Download manual: manual Download data sheet: data sheet NOTICE Because all of the Eiszeit’s functions are tested after manufacturing, some coolant does remain in the system when it is shipped. This is NOT grounds for a return and does not indicate that this item is B-stock or an exchanged item. Notice regarding shipping This item can only be shipped through a freight forwarding service. Since shipping costs will vary by distance, online price calculation is not possible at this time. Please give your full telephone number and email address when placing your order. We will contact you after your order is placed. Shipping costs can add up to ca. 25€ within Germany. Freight forwarding costs will be specified during the ordering process. In case of returns This item can only be sent via a freight forwarding service! Should you need to return the item, please make use of a forwarding agency! Items returned to us via parcel service will not be accepted, as shipping them through a parcel delivery service will damage the device!
The two clamp set is suitable for the equalizing tanks of the Z-series from Bitspower. They make it possible to mount the expansion tank individually inside or outside the case, also with the corresponding pump. The set contains two clamps each with four screws and nuts. The holders have an 80mm, 5mm high and 15mm deep base. The clamps themselves are 10mm wide, have an inside diameter of 60mm and an outside diameter of 66mm. Technical Data: Dimensions: 80 x 70 x 15 mm (W x H x D) Inner Diameter Clamps: 60 mm Outer Diameter Clamps: 66mm Material: Plastic Color: Black Compatibility: Bitspower water tanks of the Z-series
The adapter for 16mm (AD) Hard Tubes in matt black from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Matt Black Connection: 16 mm (OD) Thread: G1/4" Thread Length: 5 mm
DEMCiflex Dust Filter 120mm White DF0688Toote kirjeldus inglise keeles:If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior. In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters. DEMCiflex offers a particularly easy-to-retrofit solution, which in this case is suitable for 120 mm fans. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held. The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly. Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. This is very simple in many ways. Firstly, it is easy to see if cleaning is necessary again - as soon as the white filter fabric has a gray haze, you should do this task. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt. Note: The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate. Technical details:Size (frame): 128 x 128 mmSize (filter): 105 x 105 mmCompatibility: 120 mm fan slotMaterial (filter): polyester meshColor: white (frame), white (filter)Mounting: magnetic bracket + mounting frameAdvantages: Fast installation No compatibility restriction Easy and quick cleaning Effective filter effect with high air permeability Durable fabric
With the new compression fittings from Alphacool for Plexi, brass or carbon tubes, Alphacool is taking a further step towards perfection and quality. The first two colours, chrome and deep black, offer great variety. The fully coordinated product series allows each system to shine in its own right, and individuality has no limits when paired with the Alphacool Plexi and brass tubes! The colouring is bound fast to the brass surface with a new chromatization process. This ensures the longevity of the intense colour and prevents chipping of the chrome layer. An Alphacool logo on the connector emphasizes the distinctive nature of this product once again. The Function of this Connector is:This connector is used to connect two 16mm Plexi, brass or carbon tubes at a 90° angle. Dimensions: Width: 41.5mm Height: 41.5mm Technical Details: Material: brass, chromatized Colour: deep black Scope of Delivery: 1 x Alphacool HT 13mm HardTube Compression Fitting 90° L-Connector for Plexi, brass tubes - knurled - Deep black
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: 90° Angle AdapterThis 90° angle adapter has a ¼” external screw thread on one side and a ¼” internal thread on the other side. Its special feature is that both screw threads are rotatable, allowing for maximum flexibility! Technical Specifications: Material: Brass Colour: Chrome Dimensions: Length: 31,5mm Width: 32,5mm Height: 18mm Scope of Delivery: 1x Alphacool Eiszapfen angled adaptor 90° rotatable G1/4 outer thread to G1/4 inner thread - chrome
RAIJINTEK bringt die neue RBW-Pumpe der ATLANTIS-Serie D5 (mit 200-mm-Reservoir) auf den Markt. Die ATLANTIS D5 RBW vereint eine integrierte und einzigartige Regenbogen-RGB-LED (5V Addressierbar), eine LED-Lichterkappe, die eine erstklassige Lösung für PC-Enthusiasten darstellt. Diese erreicht einen Super-Flow / Fördermenge von bis zu 900 l / h und einen Head-Lift von 4 Metern bei maximaler Geschwindigkeit. Eine hervorragende Leistung, Qualität und Zuverlässigkeit: ANTILA D5 RBW wird aus hochwertigem POM- und PMMA-Material hergestellt und bietet eine kristallklare, stetig, geräuscharme Hochleistungslösung. Mit der ANTILA D5 RBW können PC-Enthusiasten nicht nur ein bemerkenswert performantes Flüssigkeitskühlsystem bauen, sondern auch extern modulare Upgrades für ihren PC kombinieren. Technische Daten: Maße: 80 × 95 × 305 mm (L x B x H) Gewicht: ca. 1260 g Material: POM (Pumpe), Tempered Glass (Reservoir), Aluminium (Stege), Kunststoff (Verschlussstopfen), Stahl (Halterung) Maße: 60 x 60 x 220 mm Ports: 4x G1/4-Zoll Pumpe: Förderhöhe: ca. 3,9 m Maximale Durchflussleistung: 1500 L/h Druck: max. 50 PSI Lager: Keramik Eingangsspannung: 12 V Leistungsstufen: P1 : 1,800 U/min P2 : 2,500 U/min P3 : 3,300 U/min P4 : 4,000 U/min P5 : 4,800 U/min Lautstärke: 40 dB(A) Anschluss: 4-Pin-Molex (Strom), 3-Pin 2510-3P [NA/NA/Fg] Beleuchtung: 12x A-RGB-LEDs 3-Pin RGB (5VDG, 5V)
EK-Loop UNI Pump Reservoir Bracket - 140mm is a mounting adapter for installation of EK D5, DDC, SPC, and VTX pumps and pump-reservoir combo units to any 140mm fan mounting hole pattern (125mm hole spacing). Additionally, it can be used with EK-RES X3 Holder 60mm (2pcs) to mount any reservoir or pump-reservoir combo with a tube of 60mm in diameter. It can be used horizontally or vertically. The offset on the bracket allows for precise placement of the pump or reservoir according to your needs for clearance or easier tube routing. By turning the bracket around the offset can be moved left, right, back, or forward in a horizontal setup, and also left, right, up, or down in a vertical setup. Made from press-bent 1,5mm thick painted steel. The height of the bracket is 11.5mm. This product is compatible with the following EK products: Vertical: EK-Quantum Kinetic TBE D5 series Vertical: EK-XRES Revo D5 series Vertical: EK-XRES X3 series Horizontal: EK-XTOP DDC series Horizontal: EK-XRES SPC Classic series Horizontal: EK-Quantum Kinetic TBE DDC series Horizontal: EK-Quantum Kinetic TBE VTX series Horizontal and Vertical: EK-XTOP Revo D5 series Enclosed: EK-Loop UNI Pump Reservoir Bracket - 140mm 5x polyamide washer M4 0.8mm 5x screws M4x6 DIN7984 5x nut M4 Allen key 2.5mm
The new Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details: Material: brass Colour: chrome Diameter: 22 mm Height: 20 mm Thread: G1/4" Thread length: 5 mm HardTube size: 13 mm Compatibility: PETG, acrylic, brass and glass tubes Weight: 0,023 kg Scope of supply: 1x Alphacool Eiszapfen PRO 13mm HardTube Fitting G1/4 - Chrome Notice: Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days. We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool. Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
When putting down, nothing beats smooth and easy. That is why we created the PK-2 thermal compound. The PK-2 thermal compound is a high performance thermal bonding agent specially designed for easy application.PK-2's core feature is its low viscosity, allowing for one to quickly and easily apply the thinnest coat of thermal compound possible.This will get your components up close and personal in no time.Soojusjuhtivus10,2 W/m·KKaal5 g
Dust can be a computer system’s worst enemy as it has the potential to lower cooling performance or cause damage when left overly accumulated. But most fan filters are a hassle to install so SilverStone created an easy to use FF123 fan filter.The FF123 has embedded magnet in its frame so it can be effortlessly attached to any steel chassis without tools. So for those looking for dust reduction for component longevity with increased cooling efficiency, the FF123 is an excellent buy.- Convenient magnetized design for easy installation- Ultra fine filter provides great dust reduction properties- Compatible with most 120mm fans or ventsWeight & dimensionsWidth 120 mmDepth 1.5 mmHeight 120 mmWeight 13.6 gDesignBlackPerformanceSuitable for ChipsetFan diameter 120 mmCompatible processor series No
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This 45 degree angled G1 / 4 "fitting for hoses with 13mm inner diameter does not use a union nut, which is why any tube thickness and thus outer diameter can be used. The blood red connection can be turned on the side of the screw thread. This greatly facilitates installation and allows for precise alignment. Note: For a better and safer fit, we recommend using a cable tie or a hose clamp. Furthermore, the rotation function of the connections should always be used in the disassembled state, as this is relatively difficult to move due to the design. When installed, do not apply force to connections to avoid damaging the connectors themselves and the radiators on them. Technical details:Material: brassColor whiteConnections: Thread: G1 / 4 inch hose: 13 mm (inside diameter)
With the two matt black holders from Bitspower it is possible to install the complete series of D5 pump, D5 top and Z tube reservoir in the case. The mounting kit is compatible with the D5-Top and the 2D5-Top and can therefore be used as an extension or replacement. Technical Data: Colour: Matt Black Compatibility: D5-TOP, 2D5-TOP
