The nickel-plated temperature sensor in the colour shiny black from Bitspower is an easy way to keep an eye on the water temperature of a water cooling system. To do this, the sensor, which has a sealing ring, is screwed into a G1/4" thread, whereby an internal extension then measures the temperature of the surrounding water. With a 90cm long 2-pin cable, the sensor can be connected to a display or control unit or to a compatible motherboard. This allows, for example, the rotation speed of radiator fans to be automatically controlled depending on the water temperature. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Black Thread: G1/4" Thread Length: 4 mm Sensor Length: 8 mm 2-Pin Cable: 90 cm
Mini-Pumpe für Silent-Wasserkühlsysteme, 72 L/h Durchfluss und 1 m Förderhöhe, Betrieb zwischen 7 und 13,5 Volt bei nur 3,2 Watt Leistungsaufnahme, Ohne Aufsatz/Pumpen-Top
Full-Block-Wasserkühler von EK Water Blocks, für RTX 3080 und 3090-Grafikkarten im Referenz-Design, schwarzer Acetal-Deckel, Kühlkörper aus hochreinem Kupfer
EK-Quantum Vector FE RTX 3080 Backplate - Black is a CNC machined retention backplate made from black anodized aluminum for the EK-Quantum Vector FE RTX 3080 - Special Edition water block. The backplate covers the backside of the graphics card's PCB and serves as an aesthetic add-on. It provides additional passive cooling for the GPU core and rear of the printed circuit board VRM section. Due to the small size of both the card and the water block, the backplate boasts a ribbed design for additional passive cooling power. Enclosed EK-Quantum Vector FE RTX 3080 Backplate - Black Mounting screws Thermal pads
Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung
Stylische Sleeves von CableMod, für Hydro-AiOs von Corsair & EVGA & NZXT, Textil-Sleeving aus ModMesh-Material, einfache Installation in wenigen Minuten
Funktionaler Fan-, Pumpen- und RGB-LED-Controller, mit separatem LC-Display, bis zu 4 Lüfter mit oder ohne PWM, 4x RGB (12VGRB) & 4x adressierbares RGB (5VDG), inklusive Fernbedienung
The Distroplate D1 was developed in cooperation with ITRaid especially for the Lian Li PC-011 Dynamic XL. It enables components such as the graphics card, processor and radiator to be connected to each other and also ensures a clean design. The D1 finds its place directly next to the IO Shield. Technical details: Dimensions without pump (W x H x D): 352 x 124 x 16 mm Colour: transparent Material: acrylic glass, plastic Connections: 7x G1/4 ports
120 mm großer PWM-Lüfter, digital adressierbare RGB-LED-Beleuchtung (3-Pin), Drehzahl von max. 1.500 U/min, transparenter Rahmen und Lüfterblätter, inklusive Schrauben
Set aus 16 braunen Anti-Vibrations-Befestigungen (Gummi-Entkopplerstifte) von Noctua zur einseitigen und geräuschgeminderten Befestigung von Lüftern am Gehäuse, auch für Slim-Lüfter geeignet
Verchromter Wakü-Adapter von Phanteks mit drei G1/4-Zoll-Gewinden (Female) zum Splitten bzw. Zusammenführen des Flüssigkeitsstroms eines Kühlkreislaufs
The Protium reservoir from Singularity Computers is a 200mm tube with a diameter of 60mm. Together with the attachments made of acetal and acrylic, the reservoir reaches a height of 239mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 x 60 x 239 mm (L x W x H) Diameter: 60 mm Material: Acetal (lid, base), Acrylic (reservoir), Aluminium (retention rings) Color: Black, Silver, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 200 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
Ausgleichsbehälter von Singularity Computers, mit 250mm Tube-Höhe, transparente Röhre aus Acrylglas, mit Deckel und Boden aus Acetal, flexible Montagemöglichkeiten, Schwarz
The EK-Quantum Vector Strix RTX 3070 D-RGB from EK is a complete cooler for the graphics card of the ROG Strix RTX 3070 from ASUS. The high-quality workmanship and the nickel-plated copper material used for the heat sink are striking. The copper covers all important areas of the graphics card, such as GPU, memory and voltage converter. The optimised channel structure provides very efficient and reliable cooling. Visually, the cooler is rounded off with a black acetal lid and has four G1/4" connections. But there's more: an addressable D-RGB strip is also integrated, which provides a little illumination even on dark gaming days. The graphics card cooler is compatible with the common RGB synchronisation technologies of all major mainboard manufacturers. Technical Data Material: Nickel-Plated Copper (bottom), Acetal (cover) Color: Black Thread: 4x G1/4" D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) D-RGB LED count: 6 D-RGB cable length: 500mm Compatibility Asus ROG Strix RTX 3070 Scope of Delivery EK-Quantum Vector Strix RTX 3070 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
The Protium reservoir from Singularity Computers is a 200mm tube with a diameter of 60mm. Together with the attachments made of acetal, the reservoir reaches a height of 239mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 x 60 x 239 mm (L x W x H) Diameter: 60 mm Material: Acetyl (lid, base), Acrylic (reservoir), Aluminium (retention rings) Color: Transparent, Black Threads: 7x G1/4" Scope of Delivery: 1x 200 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
Tootekood: FD-FAN-PRI-AL12-3PGTIN: 7340172701606Jahutid ja lisad
Dimensions 120x120x25mm, Turns 1200rpm, Air flow rate 86.02m³ / h, Air pressure 1.27mmH₂O, Volume 19.5dB (A), Fan bearing LLS, Connection 3-pin, Voltage range 7-12V, Power consumption 1.2W, Special features RGB illuminated, RGB header (3-pin + 5V / DATA / GND), FD-FAN-PRI-AL12-3P
The vertical bracket from Singularity can be used to mount a Protium series reservoir or pump attachment vertically on a 120 or 140 fan slot of a radiator. It is even possible to mount two reservoirs or pump attachments. Technical Data Colour: Silver Material: Aluminium (mounting plates), Stainless Steel (screws) Scope of Delivery: 2x SC Universal 120/140 Back Plate Mounting Plate 2x Vertical mounting plate 4x M4 Button Head Hex (10 mm) 4x M4 Countersunk Hex (10 mm) 4x M4 Washers 4x M4 Nut
The transparent acrylic lid fits all Protium reservoirs from Singularity. It has four G1/4" connections and, due to its design, can be integrated into the water cooling circuit in a variety of ways. Technical Data Colour: Transparent Material: Acryl Thread: 4x G1/4" Compatibility: Protium reservoir
