The Lian Li O11D Mini Front MK2 is made of high-quality and transparent acrylic glass, consists of a large chamber and 5 channels. As befits a distro plate, it allows all radiators, as well as GPU and CPU to be connected to each other in the circuit. For this purpose, 12 ports (incl. fill port & drain port) are available. The MK2 replaces the original front panel. The screw points provided by Lian Li can be used for fixing. For compatibility of the Distro Plate with radiators, please note that only (!) "EKWB SE360 (2x)" & "EKWB SE240 (1x)" can be used. In addition to the screw set for fixing the Distro Plate to the housing, the scope of delivery includes a specially developed D5 adapter (WITHOUT PUMP!). The adapter is compatible with every common D5 pump and is decoupled from the Distro Plate. The vibrations of the pump have been reduced to a minimum by means of rubber-mounted sealing rings, which results in less noise pollution. Features at a glance Smallest distro plate in the Lian Li range Unique plug-in system for easy installation in the case Adapter enables perfect fit of a D5 pump Compatible with EK-CoolStream SE360 2x and 1x SE240mm Technical details Material: high-quality acrylic glass, plastic Manufacturing: CNC machining of the acrylic, assembly by hand Dimensions: without pump (W x H x D): 487 x 211 x 21 mm with pump (W x H x D): 487 x 211 x 90 mm Colour: transparent Connections: 12x G1/4 inch connections Capacity: 435 ml Compatibility: 3x360mm fan space Scope of delivery Lian Li Mini MK2 4x M3 glands
Tootekood: ROGSTRIXLCII360ARGBGTIN: 4711081145295Jahutid ja lisad
Water block dimention: 80 x 80 x 45 mm Block Material (CPU Plate): Copper Radiator Dimension: 121 x 394 x 27 mm Radiator Material: Aluminum Tube: Sleeved Rubber tube Tube Length: 380 mm Fan: ROG Designed ARGB Radiator Fan - Size: 3 x Fan Slots (120mm) - Dimension: 120 x 120 x 25 mm - Speed: 800 - 2500 RPM +/- 10% - Static Pressure: 5.0 mmH2O - Air Flow: 80.95 CFM / 137.5 m3h - Noise: 37.6 dB(A) - Control Mode: PWM/ DC AURA Sync Support: Yes Compatibility Intel: LGA 1700, 1200, 115x, 2011, 2011-3, 2066 AMD: AM4 Package Content: 1 x Liquid Cooler (pre-applied thermal compound) 3 x 120 mm ARGB Radiator Fan 1 x USB cable for software control 1 x 1 to 4 ARGB spliter cable 1 x Accessory Pack of Screws and Brackets 1 x Quick Start Guide 1 x ROG Sticker
SCYLLA PRO CA240, Raijintek’s Komplettset an Hardtube-Watercooling Kit. Eine erstklassige DIY Water Cooling Solution in Premiumqualität für Ihre Maschine. Ein Vollkupfer-FORKIS PRO RBW-CPU-Wasserblock, eine leistungsstarke ANTILA D5 EVO RBW ADD-Pumpe / Reservoir-Kombination, einen Vollkupfer 240-mm-Radiator, 2 Flaschen 500 mml RAIAQUA-T1 Pure Clear Premium-Coolant, 3 EOS 12 ADD PWM-Lüfter mit einem hohen statischen Druck, 12 Vollkupfer-Fittings 90° * 6 & 180° * 6, 4 * 500 mm PETG-Hartrohren und ein 5-Port-5-V-adressierbarer (Rainbow) CONTROL HUB mit einem 5-Port-PWM und Fernbedienung, einem M / B-Anschluss Kabel zur Synchronisation mit Ihrem M / B oder per Fernbedienung. Raijintek bietet allen Enthusiasten das beste Erlebnis beim Bauen mit DIY WATER COOLING SYSTEMEN. Technische Daten: Radiator: Typ: Calore Elite CA240 Maße: 273 x 120 x 27 mm (L x B x H) Gewicht: 571 g Material: Kupfer Farbe: Schwarz Finnendichte (FPI): 17 Pumpe/Ausgleichsbehälter: Typ: ANTILA D5 RBW Maße (insgesamt): 80 x 305 x 95 mm (B x H x T) Maße (Ausgleichsbehälter): 60 x 220 mm (Ø x H) Gewicht: 1.260 g Material: POM, Glas, Aluminium, Stahl Farbe: Schwarz (Pumpe), Transparent (Ausgleichsbehälter) Förderhöhe: 4 m Durchsatz: 1.500 L/h Druck: max. 50 PSI Lautstärke: max. 40 dB(A) Umdrehungen: 1.800, 2.500, 3.300, 4.000, 4.800 U/min Anschluss: 4-Pin Molex, 2510-3P (3-Pin Lüfter) Spannung: 12 V Stromstärke: 2,5 A Beleuchtung: ARGB Lebensdauer: 50.000 h Kühler: Typ: FORKIS PRO RBW Maße: 82 x 16 x 82 mm (B x H x T) Gewicht: 720 g Material: vernickeltes Kupfer (Kühlerboden), Aluminium (Cover), Acrylglas (PMMA, Deckel) Farbe: Schwarz, Transparent Kompatibilität: Intel-Sockel: LGA 775, 115x, 1366, 201x, 2066 AMD-Sockel: AM2(+), AM3(+), AM4 RGB/Lüfter-Controller: Typ: ARGB, 3-Pin RGB (5VDG, 5V) Anschlüsse: 5x ARGB, 5x 4-Pin PWM Lüfter: Typ: EOS 12 RBW ADD Anzahl: 2 Stück Maße: 120 x 25 x 120 mm (B x H x T) Gewicht: ca. 260 g Farbe: Schwarz, Weiß Lagertyp: Gleitlager Drehzahl: 800 bis 1.800 U/Min Fördervolumen: max. 127,4 m³/h Statischer Druck: max. 2,3 mmH2O Lautstärke: max. 28 dB(A) Spannung: 12 V Startspannung: 7 V Anschluss: 4-Pin PWM, 5V ADD Header Lebenserwartung: 40.000 h Lieferumfang: 1x FORKIS PRO RBW CPU-Kühler 1x ANTILA D5 RBW Pumpe/Reservoir 1x Calore Elite CA240 Dual Radiator (240 mm) 2x EOS 12 RBW ADD 120-mm-Lüfter 4x RAITUBO-H14 Hard-Tubes, 14/10 mm (OD/ID), 500 mm - transparent 6x 14/10 auf 14/10 mm Außen-/Innendurchmesser (OD/ID) Hard-Tube Anschlüsse, 90°-Winkel - schwarz 6x G1/4 Zoll auf 14/10 mm Außen-/Innendurchmesser (OD/ID) Hard-Tube Anschlüsse - schwarz 2x RAIAQUA-T1 Kühlflüssigkeit, je 500 ml 1x 5-Port ARGB-Controller inkl. Fernbedienung 1x Wärmeleitpaste Montagematerial für Radiator, Lüfter, AMD- und Intel-Sockel
Die R240B-Reservoir’s der neuen ANTILA PURE-Serie von RAIJINTEK bieten einzigartige Regenbogen Effekte des A-RGB’s (5 V adressierbar) durch die eingebaute LED-Lichtkappe. Die Lösung befindet sich auf höchstem Niveau für PC-Enthusiasten und kundenspezifische PC-Modder, um ein Super-ARGB-LED-Effekt Wasser-kühlsystem zu erstellen. Die ANTILA PURE-Serie wird aus hochwertigem POM- und Echtglas hergestellt, um eine kristallklare, stabile, leise, leistungsstarke und langlebige Lösung zu bieten. Mit der ANTILA PURE-Serie können PC-Enthusiasten nicht nur ein bemerkenswert, wunderschönes Flüssigkeitskühlsystem bauen, sondern auch extern modulare Upgrades für ihr Gehäuse kombinieren. Eine robuste Montagehalterung bietet dem Benutzer auch eine zuverlässige, richtungsweisende Montagemöglichkeit und eine benutzerfreundliche Installation. Die ANTILA PURE-Serie ist das beste LED-Reservoir für Ihre Wasserkühlung Ihres Systems! Technische Daten: Anzahl: 1 Stück Dimensionen [l×b×h]: 77×77×263 mm Reservoir Dimensionen: 65×65×217 mm Kühlmittel Kapazität: 700 ml Material: POM + Glas + Aluminium + Stahl Material Gewicht: 1030 g Schraubgewinde: G 1/4" Addressable LED: 12 LED Rainbow (4pin header, 2510 spec) – Addressable LED LED Control Method: Motherboard RGB HEADER/ Fernbedienung und RJK Control Box LED Input Connector: 4-PIN header (2.5 Crimp) LED Eingangsspannung: 5V
Tootekood: FD-FAN-PRI-AL18-PWMGTIN: 7340172702580Jahutid ja lisad
Product kirjeldus: Fractal Design Prisma AL-18 case fan Product Type: Case fan Package Content: 4 fan screws, 4 M4 x 43mm screws, 4 screws (6-32 x 43) värv: must frame, valge blades Fan Diameter: 180 mm Fan kõrgus: 38 mm Fan Bearing: Long life liugelaager pöördekiirus: 300-1200 pööret minutis õhuvool: 146.8 cfm müratase: 14.9 - 37.4 dBA Power ühenduspesa: 4-pin ARGB connector nominaalpinge: 12 V Features: Trip wire technology, PWM control mõõtmed (WxDxH): 18.2 cm x 18.2 cm x 4 cm kaal: 521 g Manufacturer Warranty: 3-year garantii
Der Temperatur Sensor ist an einem ca. 40 cm langen Kabel angebracht und kann dort platziert werden, wo es besonders heiß werden kann. Dies stellt sicher, dass die Temperatur im gesamten Gehäuse nicht höher als 38 °C werden und unterstützt die Kühlung der CPU oder Grafikkarte. Technische Daten: Geschwindigkeit: 300 - 1350 rpm Luftstrom: 53 CFM/ 90.1 m³/h Statischer Druck: 1 mm H₂O Geräuschpegel: 0.3 Sone Betriebsumgebungstemperatur: 0 - 40 °C Lüfterrahmen: Standard Kontrolltyp: Temperature Control Anschluss: 3-Pin-Connector Lüfterlager: Fluid Dynamic Bearing Typische Spannung: 12 V DC Anlaufspannung: 6 V Stromstärke/ Spannung: 0.20 A / 12 V Kabellänge: 400 mm
Black twin-tower CPU cooler, 2x 140mm PWM fans with 700 to 1,800 RPM, seven copper heatpipes and max. 280W TDP, compatible with AMD and Intel CPUs.Socket compatibility：Intel LGA1200/115X/1700/2011, AMD AM4/AM5
ROG STRIX LC II 240 ARGB All-in-one liquid CPU cooler with Aura Sync, Intel® LGA1700/1200/1150/1151/1152/1155/1156/2011/2011-3/2066 and AMD AM4/TR4 support and dual ROG 120 mm addressable RGB radiator fans Seventh Gen Asetek pump delivers exceptional cooling and minimal noise with an operating range starting at 840 rpm. Dual ROG-designed radiator fans provide optimized airflow and static pressure. ARGB lighting on the NCVM-coated pump cover and the radiator fans conveys a sleek, modern design. Aesthetic perfectly complements ROG motherboards from center stage. Reinforced, sleeved tubing offers increased durability.
With its 240 mm radiator, the S80 RGB is a compact all-in-one water-cooling system that provides efficient cooling for all CPUs. Apart from providing visual highlights in 16.7 million colors, the addressable RGB PWM fans also ensure good cooling performance with a speed of up to 2,000 rpm. Installation is easy, thanks to the flexible, textile-braided tubing and the supplied mounting brackets.Full Fan Control The two RGB PWM fans that belong to the S80 RGB's 240 mm radiator not only have fully addressable RGB illumination, but their speed can also be controlled within a range from 600 rpm to 2,000 rpm. And for easy cable management, the fans can be daisy chained. Also the pump has PWM control for optimal performance and low noise volume.Best Possible Heat Dissipation Like the fans, the water block and pump unit is also equipped with RGB illumination and presents itself with a chic infinity mirror effect. The copper plate and the supplied high-quality DOWSIL™ thermal paste ensure the best possible heat dissipation.Compatible with All CPUs. Thanks to the two enclosed mounting brackets for CPUs of all manufacturers, this all-in-one water-cooling solution is optimally prepared for direct use in the PC case.Flexible and Easy to Install Via the flexible tubing, installation in the PC case is as uncomplicated as possible. The tubing is textile braided for optimal protection against scratches.Rotatable Sharkoon Logo In order to ensure that the Sharkoon logo is always horizontal, it can be easily rotated to the desired position on the water block and pump unit. General CPU Socket Compatibility: Intel® Socket LGA 115X / 1366 / 1200 / 1700 / 2011 / 2011-3 / 2066 (Core i3 / i5 / i7 / i9 ) AMD® TR4 / TRX4 / AM5 / AM4 / AM2 / FM2 / FM1 / AM3+ / AM2+ / AM2 Weight: 1.48 kg Water Block & Pump Dimensions: Ø 71.5 mm x 52.3 mm Weight: 0.89 kg Cold Plate Material: Copper Pump Speed: 1,600 ~ 3,200 rpm ± 6 % Rated Voltage (Pump): 12 V Rated Voltage (LEDs): 5 V Rated Current (Pump): 0.35 A Rated Current (LEDs): 0.8 A Rated Power (Pump): 4.2 W Rated Power (LEDs): 4.0 W Pump Connector: 4-Pin PWM LED Connector: 4-Pin (5V-D-coded-G) Radiator Type: Brazed Radiator Dimensions (L x W x H): 272 x 121 x 27.5 mm Material: Aluminium Alloy Tubing Length: 400 mm Fans Number of Fans: 2 Dimensions (L x W x H): 120 x 120 x 25 mm Fan Speed: 600 ~ 2,000 rpm ± 10 % Max. Airflow: 131.93 m³/h Max. Air Pressure: 2.90 mmH₂O Max. Noise Level: 35 dB(A) Illumination: 12x Addressable RGB LED Rated Voltage (Fan): 12 V Rated Voltage (LEDs): 5 V
The Enermax ELC-LMF-120-SF LiqMaxFlo SR is a high-performance AIO (All-In-One) CPU cooler designed to deliver superior cooling efficiency. With a net weight of 1.56 kg, this cooler is built to handle the demands of powerful processors, ensuring optimal temperature regulation for enhanced system performance. Its sleek design and advanced cooling technology make it a top choice for gamers and professionals alike.
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Double-ThreadedThis adapter has a ¼” external screw thread. This allows, for example, two sockets with ¼” internal threads to be connected. Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Length: 22mm Diameter: 18mm Scope of Delivery: 1x Alphacool Eiszapfen double nippel rotatable G1/4 outer thread to G1/4 outer thread - deep black
The Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details Material Brass Colour White Hight 23 mm Diameter 26 mm Thread length 5 mm Thread G1/4“ HardTube size 16 mm Compatibility PETG, acrylic, brass and glass tubes Weight 42 g Download Datasheet PDF: Alphacool Eiszapfen PRO 16mm HardTube Fitting G1/4 - White Sixpack Fitting Map: You can find an interactive map of all Alphacool fittings here.
With the Alphacool Eiszapfen you connect your hardtubes at the perfect 90° angle. The hardtube is tightly screwed to the union nut, seals immediately and can be easily loosened with one hand. The fitting can be rotated freely (360°) thanks to the 90° angle. The possibilities are almost limitless. Technical Details Width: 34 mm Length: 34 mm Material: brass Color: Deep Black
The new Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details: Material: brass Colour: chrome Diameter: 26 mm Height: 23 mm Thread: G1/4" Thread length: 5 mm HardTube size: 16 mm Compatibility: PETG, acrylic, brass and glass tubes Weight: 0,042 kg Scope of supply: 1x Alphacool Eiszapfen PRO 16 mm HardTube Fitting G1/4 - Chrome Sixpack
The Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details Material Brass Colour White Hight 20 mm Diameter 22 mm Thread length 5 mm Thread G1/4“ HardTube size 13 mm Compatibility PETG, acrylic, brass and glass tubes Weight 23 g Download Datasheet PDF: Alphacool Eiszapfen PRO 13mm HardTube Fitting G1/4 - White Sixpack Fitting Map: You can find an interactive map of all Alphacool fittings here.
