Compact case with less than 9L volume; Supports up to m-ATX motherboards; 80mm fan pre-installed; Classic Design; 80PLUS Bronze 300W Power Supply Included
The CORSAIR 2000D AIRFLOW is a Mini-ITX small-form-factor case with phenomenal cooling thanks to steel mesh front, side, and rear panels that deliver plentiful ventilation to your system.
Product kirjeldus: Zalman S2 TG - Torn - ATX Product Type: System cabinet Form Factor: Torn I/O Ühendusi: 2 x USB 2.0 1 x kõrvaklapid 1 x microphone 1 x USB 3.0 Supported Motherboards: ATX, microATX, Mini-ITX System Cabinet Features: Supports 120 mm radiator in rear, toetab 120 mm radiator in front panel, tempered glass side panel, bottom dust filter, top magnetic dust filter Power Device: No toiteplokk mõõtmed (WxDxH): 19.6 cm x 42.4 cm x 46.2 cm kaal: 5 kg
Housings are our middle name. We've been on this topic for years and it's hard to impress us, but the sight of ENDORFY Arx 500 ARGB gives us goosebumps. It's out of pride - although some say it's because of the low temperature inside the housing. We have included our best solutions (including 4 Stratus 140 PWM ARGB). As a result, you get one of the largest (486×228×429 mm, i.e. slightly shorter than the Arx 700 series) ENDORFY cases - with room for a tall cooling system (up to 179 mm), 7 fans and most available graphics cards (up to 350 mm ). The outside is also great - with a tempered glass window and front and top panels that act as filters, our ENDORFY Arx 500 ARGB can become a housing master. Come get some fresh air! We all know that long hours at work and on the battlefield (yes, there is a difference) = welded components that beg for a break over time. With Arx 500 ARGB you don't have such actions - the casing helps keep them pleasantly cool even when you remove the components from the factory. This is due to the spacious interior, which can accommodate up to 7 fans. Additionally, the housing panels act as filters - so you don't need additional protection against dust. Compared to traditional solutions, this single layer allows for better air circulation and makes it easier to keep the components in a pleasant draft (because cooling is extremely important to us). Lord of the winds When you look inside the Arx 500 ARGB, you immediately see that there is a specific team of cooling fans working inside. We packed 4 Stratus 140 PWM ARGBs in it, created in cooperation with Synergy Cooling, so you can be sure of adequate airflow and low temperature. Because winter never surprises us. The Stratus 140 PWM ARGB is our favorite. It's 14 cm tall, has an optional semi-passive mode and a durable FDB bearing, so you can count on quiet and smooth operation even in extreme conditions. We also added a splitter to control the fan speed using a PWM signal from one motherboard connector. With such a package you are like a real ruler of the storms. Panels with filters If we were to talk about the best option in the Arx 500 ARGB, in our opinion, we would choose excellent ventilation. This is provided, among others, (right after great fans) by panels made of finely perforated sheet metal. Some people will probably say that they can be replaced with put-on filters, but the truth is that the double anti-dust layer limits the air flow like metal armor in LARPs. And no one likes to have welded... components. That's why we made sure that the panels (front and top) in our case act as filters. This single protective layer makes the inside of the case as cool as a winter morning, and you don't have to install additional dust protection. Additionally, you can remove each filter and clean it with a cloth or a vacuum cleaner (or rinse it under running water) and it will take you literally a moment. Mister of casings We've already said it, but we'll say it again if there's ever a Mr. Housing election, the Arx 500 ARGB has a chance to make it to the podium. All we need to do is turn on the ARGB-lit fans inside and the title is ours. The tempered glass side highlights them like a dream. Everything's all right! If someone asked us to describe the Arx 500 ARGB in three words, we would say: Everything is fine! It's literally one of our largest cases, so it easily fits everything that's most important to you. Of course we mean components. Arx 500 ARGB is 486×228×429 mm, so you can pack a lot inside, for example a tall cooling system (up to 179 mm), 7 fans (including 4 you get from us at the start) and most graphics cards available on the market (up to 350 mm). There will also be a large power supply, you can mount it in the position that is most convenient for you. Its installation is not a philosophy, because we have added, among other things, a dedicated mounting frame. Light in the housing Equipment without a backlight is ok, but it's nice to see a light in the housing sometimes. With Arx 500 ARGB you have the option of just one click (the RESET button on the top of the housing is responsible for control) and your components will be illuminated with a cosmic glow. Thank your ARGB fans for that. Thanks to 4 Stratus 140 PWM ARGB lights (we installed them in the housing for you), you can freely configure the backlight. You can set them up in just a moment thanks to the built-in PWM and ARGB controllers - everything is immediately connected into one working whole, compatible with ENDORFY products with the ARGB mark (and compatible products from other manufacturers), so you can easily synchronize the backlight of the entire set based on Arx 500 ARGB. Even if it's your first assembly ever.
Automatic RGB fan Equipped with top-quality system fans that cool the system and maximize its performance. System fan included The kit includes top-quality system fans that cool your system and ensure maximum performance Magnetic filter The magnetic dust filter on the top is designed to provide users with the best disassembly and cleaning experience. Optimized air flow This case supports the installation of up to 7 system fans and ensures ventilation of the entire system for better stability. Tempered glass The highest quality tempered glass, 4 mm thick, guarantees window durability and good visibility.
ROG Hyperion GR701 E-ATX computer case, 420 mm dual radiator support, four 140 mm fans, metal GPU holder, component storage, ARGB fan hub, 60W fast charging. - Extra Cooling: Dual 420mm radiator support, four 140 mm fans and a built-in fan hub offer massive airflow possibilities - Extra Space: The beefiest graphics cards get plenty of room; cable management gets an expansive chamber that is 34 mm deep, with a 46 mm wide routing channel - Extra Convenience: Hinged tool-free side panels, a built-in storage drawer and an integrated graphics card holder come together to amp up the building experience - Extra Power: Dual USB Type-C ports, 60-watt fast charging, aluminum-reinforced frame and handles deliver power and premium ruggedness - Extra Stylish: The fan hub and lighting panel all support Aura Sync, and the chassis is decked out with anodized metal and hairline finishes
Cabinet Form Factor: Midi Torn Mainboard Form Factor13.5-inch Internal Drivesahtleid: 2 2.5-inch Internal Drivesahtleid1Audio Line-Out: 1Lisatarvikud: RGB LED Strip Chassis Features15 mm Nominal kaal: 6.78 kg garantii Products Returnable1Box kaal Brutto (kg): 8.04 kg Retail Packaging Netokaal Carton1kg Retail Packaging Netokaal Plastic: 0.05 kg Packs in Box1
Stylischer Midi-Tower in Schwarz, Front mit RGB-Beleuchtung, inkl. 4x 120-mm-ARGB-Lüfter, Temperglas-Seitenteil, mit Netzteilabdeckung, Grafikkarten bis 317 mm und CPU-Kühler bis 157 mm
Kompaktes Mini-ITX-Gehäuse von Raijintek, aus eloxiertem Aluminium, Schwarz mit schwarzem Innenraum und Rückseite, für Mini-ITX-Mainboards und kleiner, 2x 2,5"- & 2x 2,5/3,5"-Slots, GPUs bis 28 cm & CPU-Kühler bis 13,5 cm
