Stylish Midi-Tower for motherboards up to ATX, distinctive front with infinity mirror effect and RGB lighting, 1x 120mm digitally addressable RGB LED fan pre-installed, radiators up to 240 mm, 2x 3.5/2.5" & 2x 2.5" slots, removable dust filters on top and bottom
GIGABYTE C301 GLASS V2 - Optimized Airflow Design - RGB Fusion with ARGB Connector Hub - Support Motherboards up to E-ATX - Up to 360mm Liquid Cooling Compatible - Support Vertical GPU Installation - Full-Size Tempered Glass Side Panel - With USB 3.0 x2 and USB 3.1 Type-C x1 on I/O panel - Pre-installed 4 ARGB fans
COUGAR | FV270 White | PC Case | Mid tower / Tempered, Curved Glass Perimeter / Quick Detachable Air Filters / Up to 9 Fans (1x120mm RGB Preinstalled) / White
GETTING INTO THE GAME. Are you building a gaming computer? Then of course you need your gaming rig to have a sturdy, well-thought-out, well-designed and good-looking case. One with four mounted ARGB fans, an airy front and top, and dust filters. And even better if the side panel was made into a tempered glass door. This is where Case Logic Concept Portos MIDI comes to the rescue. A concrete competitor for gaming tasks to ensure good airflow, component culture, their safety and low temperatures of installed components. Computer case that has everything you need. OPEN YOURSELF TO NEW A side panel made of tempered glass in the form of a hinged door makes it easier not only to install components, but also to keep the computer clean. Just open the door and clean the center with compressed air. Isn't it simple and practical? It's the only one we want to give you, because they simply belong to you. TO HOT COMPONENTS SAY "NO" An airy front and top panel significantly facilitates air circulation. As many as three 120 mm fans on the front and one 120 mm fan on the back Cases effectively cool the heated components. All for your comfort and the safety of your computer. Always willing to play Logic PORTOS ARGB MIDI is a case created to build an efficient and modern gaming PC. Optimal airflow, practical solutions and pre-installed ARGB fans make up its gaming character. READY FOR GAMING COMPONENTS The ability to mount graphics cards up to 340 mm and a maximum CPU cooling height of 155 mm allows the installation of most high-performance components available on the market. PROTECT YOUR COMPUTER FROM DUST THREE DUST FILTERS A dust filter has been placed under the power supply unit. It minimizes the amount of dust sucked in by the PSU's fan, positively affecting its operating temperature and service life. An additional filter is located on top of Cases. This effectively traps unwanted dust and protects the installed components. It protects against dust that enters the computer by gravity throughout the day, even when the computer is turned off. All the effective protection is complemented by mesh mesh on the front panel. OPTIMAL AIR CIRCULATION The ventilated front panel provides airflow with three, efficiently operating 120 mm fans. The back of Cases , on the other hand, features one pre-installed 120 mm fan. This allows you to effectively cool the installed components of the computer's interior, positively influencing the culture of their operation and service life. As an option, it is possible to mount three 140 millimeter fans on the front of Cases (in place of the factory-installed ones) and two 120 or 140 millimeter fans on the top on their own. Case It is also adapted for installation of water cooling. ARGB BEAUTY Case for gamers must look nice. That's why the pre-installed ARGB fans add beauty to the case and the gaming stand. The backlight color can be changed at will from the predefined settings using the RESET button on the control panel Cases. Convenient access to the top panel Convenient access to the top panel, and there are two USB 2.0 and one USB 3.0 connectors, plus one minijack connector for headphones and microphone, a power button and a button to control the fan backlight. SIMPLE INSTALLATION Everything here is well thought out and intuitive. Building a computer in this case is a pleasure and is child's play. POWER SUPPLY A gaming computer must have a good and powerful power supply. That's why we made sure that it has a home here! The maximum length of the power supply with the disk cage installed is 200 mm. A dust filter has been placed under the power supply, which effectively protects the operation of the power supply from dust. 7 PCIe expansion card slots Seven slots for PCIe expansion cards. This is the optimal number for mounting a graphics card and a network card, among others. NEED SPACE FOR GAMES? YOU HAVE IT IN ABUNDANCE! The mounting of HDD or SSD drives is obviously thought out here as well. Inside Cases at tunnel level there is a basket for 3.5" or 2.5" drives. On the motherboard tray, on the other hand, it is possible to mount two additional 2.5" drives. On the motherboard mounting wall, another two 2.5" (with a microATX or ATX motherboard size). A total of 5 SSDs and 1 HDD or 4 SSDs and 2 HDDs can be installed.
Elegant and versatile mATX case, revised version, front / top / side panels with mesh for optimal airflow, up to 3x 120 mm fans, for GPUs with max. 225 mm length, convenient carrying strap
The ASUS A21 Plus system cabinet is a testament to functionality meeting aesthetics in PC building. Designed to accommodate microATX form factors, it supports a wide range of motherboards from Mini-ITX to microATX, ensuring compatibility for various builds. The chassis is not only practical with its extensive cooling support, including space for up to 3 credit cards 120 mm fans at the front, a 120 mm fan at the rear, and options for additional fans or radiators on the top, but it also boasts a visually appealing design with ARGB fans and a tempered-glass side panel. Internal bays are plentiful, with capacity for both 2.5" and 3.5" drives, facilitating ample storage solutions. Features like the meshed front panel, top and bottom dust filters, and a dedicated cable management system underscore the cabinet's commitment to both form and function. Whether for gaming, content creation, or everyday use, the ASUS A21 Plus offers a solid foundation for building a system that looks as good as it performs.
be quiet! Pure Base 600. Kujutegur: Miditorn, Tüüp: PC, Materjal: ABS-sünteetika, Teras. Toetatud elektritoite tarne vormi faktorid: ATX. Installitud esiventilaatorid: 1x 140 mm, Installitud tagaventilaatorid: 1x 120 mm
Internal 2x 2.5 "/3.5", Front I / O 2x USB-A 3.0, 1x USB-A 2.0, 1x headphones, 1x microphone, PCI slots 7, Fan (front) 3x 120mm (RGB illuminated), Fan (rear) 1x 120mm (RGB illuminated), Fan (top) 2x 120mm (optional), Radiator sizes 240mm front, 240mm top, Motherboard up to ATX, Power supply ATX (max 200mm deep), Power supply position below, CPU cooler up to max. 166mm height, Graphic cards up to max. 349mm, Color black, black painted inside, Dimensions (WxHxD) 203x505x436mm, Volume 44.70l, Weight 6.90kg, Special features Cable management, glass viewing window, GL-02B-OP
No. of drive bays: 3 MOLEX power connectors: 2 Floppy power connectors: 1 SATA power connectors: 4 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 0 Number of power supply connector 4+4-pin 12V: 1 8-pin 12V power connectors: 0 Weight: 3.55
Product kirjeldus: AORUS C700 GLASS - FT - ATX Product Type: System cabinet Form Factor: Full Torn värv: must I/O Ühendusi: 1 x USB 3.1 Gen 2 4 x USB 3.0 1 x HDMI 1 x microphone 1 x kõrvaklapid Supported Motherboards: ATX, microATX, Mini-ITX, Extended ATX System Cabinet Features: Supports Kuni 360 mm radiator in front panel, toetab Kuni 140 mm radiator in rear panel, 2 tempered glass side panels, ARGB controller, RGB Fusion 2.0, toetab Kuni 420 mm radiator in top panel Power Device: No toiteplokk Specification Compliance: ATX mõõtmed (WxDxH): 30.1 cm x 71.4 cm x 67.1 cm kaal: 19.2 kg
CTE C750 TG ARGB Snow Full Tower case The CTE C750 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support up to 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB Snow is a high-end presentation case that allows you to imagine something outside the box. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Snow Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance.
Mid Tower Ceres 300 TG ARGB case The Ceres 300 TG ARGB Mid Tower Chassis is an ATX case shipped with two CT140 ARGB Sync PC cooling fans pre-installed on the front and one CT140 PC cooling fan pre-installed on the rear. Over 55% of the panels are perforated to provide ample airflow and support up to a 360mm radiator at the front and a 280mm radiator at the top. Mid Tower Ceres 300 TG ARGB case The Ceres 300 TG ARGB Mid Tower Chassis is an ATX case shipped with two CT140 ARGB Sync PC cooling fans pre-installed on the front and one CT140 PC cooling fan pre-installed on the rear. Its RGB lighting can be controlled via motherboard software from ASUS, GIGABYTE, MSI and ASRock. As many as 55% of the panels are perforated to ensure high air flow. Besides, a maximum of five 140mm fans or seven 120mm fans can be installed in the case, one 360mm radiator can be placed in the front and a maximum of one 280mm radiator in the top of the case, providing countless hardware options. Built for enormous airflow More than 55% of the panels are perforated With a large number of perforated cutouts, the Ceres 300 TG ARGB is designed for excellent cooling performance. Supports radiators with a diameter of up to 360 mm at the front and 280 mm at the top Our Ceres 300 provides many options for cooling components. Users can place a 360mm radiator at the front and a 280mm radiator at the top. Two CT140 ARGB Sync cooling fans and one CT140 cooling fan installed Ceres 300 TG ARGB is equipped with two 140 mm ARGB PWM fans at the front and one 140 mm PWM fan at the rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying extreme cooling performance. Air inlet and outlet The cooling performance of the Ceres 300 TG ARGB is extraordinary with two CT140 ARGB Sync PC cooling fans pre-installed at the front and one CT140 PC cooling fan pre-installed at the rear. In addition, over 55% of the panels are perforated, ensuring huge airflow through the perforated cutouts. Perfect protection against dust There are fine, removable filters on the top, front, bottom, left and right sides of the housing that provide excellent protection against dirt and can be easily removed for cleaning.
Riesiger Big-Tower aus Stahl und Aluminium, drei Installations-Modi, duales System möglich, 16x Lüfter möglich, vier Radiatoren bis zu 480 mm, RGB-Beleuchtung und USB Typ C
