CTE C750 TG ARGB Snow Full Tower case The CTE C750 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support up to 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB Snow is a high-end presentation case that allows you to imagine something outside the box. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Snow Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance.
Full Tower CTE C750 TG ARGB case The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for Centralized Thermal Efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB is a high-end presentation case that allows you to imagine something outside the box. Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE C750 TG ARGB's versatile interior includes two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. Perfect protection against dust There are small details on the top, front, bottom, rear and right side of the housing, removable filters that provide excellent dust protection and can be easily removed for cleaning.
GIGABYTE C500 PANORAMIC STEALTH KEY FEATURE - Panoramic Tempered Glass Front and Side Panels - Optimized Airflow Design - Support Back-Connect Motherboard Design, Compatible with GIGABYTE Stealth Series - RGB Fusion with ARGB Connector Hub - Support Vertical GPU Installation - With USB 3.0 x2 and USB 3.2 Gen2 Type-C x1 on I/O panel - Pre-installed four ARGB fans
ANTILA 39 COMPUTER CASE The computer case is equipped with three USB ports. The structure of the housing in black color gives elegance and the cable arrangement system allows you to organize the interior. At the top there is a ventilation grille with space for additional 120 mm fans and at the bottom there is a pollen filter.
Mid Tower Ceres 300 TG ARGB case The Ceres 300 TG ARGB Mid Tower Chassis is an ATX case shipped with two CT140 ARGB Sync PC cooling fans pre-installed on the front and one CT140 PC cooling fan pre-installed on the rear. Over 55% of the panels are perforated to provide ample airflow and support up to a 360mm radiator at the front and a 280mm radiator at the top. Mid Tower Ceres 300 TG ARGB case The Ceres 300 TG ARGB Mid Tower Chassis is an ATX case shipped with two CT140 ARGB Sync PC cooling fans pre-installed on the front and one CT140 PC cooling fan pre-installed on the rear. Its RGB lighting can be controlled via motherboard software from ASUS, GIGABYTE, MSI and ASRock. As many as 55% of the panels are perforated to ensure high air flow. Besides, a maximum of five 140mm fans or seven 120mm fans can be installed in the case, one 360mm radiator can be placed in the front and a maximum of one 280mm radiator in the top of the case, providing countless hardware options. Built for enormous airflow More than 55% of the panels are perforated With a large number of perforated cutouts, the Ceres 300 TG ARGB is designed for excellent cooling performance. Supports radiators with a diameter of up to 360 mm at the front and 280 mm at the top Our Ceres 300 provides many options for cooling components. Users can place a 360mm radiator at the front and a 280mm radiator at the top. Two CT140 ARGB Sync cooling fans and one CT140 cooling fan installed Ceres 300 TG ARGB is equipped with two 140 mm ARGB PWM fans at the front and one 140 mm PWM fan at the rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying extreme cooling performance. Air inlet and outlet The cooling performance of the Ceres 300 TG ARGB is extraordinary with two CT140 ARGB Sync PC cooling fans pre-installed at the front and one CT140 PC cooling fan pre-installed at the rear. In addition, over 55% of the panels are perforated, ensuring huge airflow through the perforated cutouts. Perfect protection against dust There are fine, removable filters on the top, front, bottom, left and right sides of the housing that provide excellent protection against dirt and can be easily removed for cleaning.
H7 Flow RGB Mid-Tower ATX Airflow Case with RGB Fans - The H7 Flow RGB revolutionizes GPU cooling in a classic mid-tower form factor. Its vertical PSU layout allows space for 3 x 120mm bottom fans, offering efficient cooling without expanding the case footprint. - Supports three bottom-mounted 120mm fans for direct GPU cooling while retaining a narrow mid-tower footprint. - Comes equipped with a F360 RGB Core single-frame fan for exceptional out-of-the-box cooling and RGB lighting. - High-performance mesh panels maximize airflow for both intake and exhaust, as well as filter dust. - Supports up to 420mm radiators in the front and 360mm radiators in the top for powerful cooling potential. - Intuitive cable management system with wide channels, built-in hooks, and included straps for easy routing. - Capacity for up to 10 fans in total: 3 up top, 3 in front, 3 on bottom, and 1 in the rear. - Conveniently access 2 x USB-A and 1 x USB-C ports located on the top panel. - Tool-less access to the front, top, and side panels makes building and upgrading a breeze.
Product kirjeldus: Cooler Master MasterBox 500 - mid Torn - extended ATX Product Type: System cabinet Form Factor: Mid Torn Windowed Side Panel: Jah, tempered glass värv: must I/O Ühendusi: 2 x USB 3.2 Gen 1 1 x headphone/microphone Supported Motherboards: ATX, microATX, Mini-ITX, Extended ATX System Cabinet Features: Top panel dust filter, front dust filter, bottom dust filter, toetab 120/140/240/280/360 mm radiator in front panel, toetab 120/140/240/280/360 mm radiator in top, toetab 120 mm radiator in rear panel, ARGB hub Power Device: No toiteplokk (ATX) mõõtmed (WxDxH): 20.9 cm x 50.5 cm x 49.9 cm kaal: 7.7 kg Manufacturer Warranty: 2-year garantii
Atos Logic Atos is a case created to build a powerful and modern gaming PC. Optimal airflow, practical solutions and the pre-installed ARGB fans define its gaming character. READY FOR GAMING Logic Atos is a case created to build a high-performance and modern gaming PC. Optimal airflow, practical solutions and the pre-installed ARGB fans add to its gaming character. INDUSTRIAL STYLE The front panel designed in a strikingly similar industrial style not only fits perfectly into the gaming PC, but also ensures excellent air circulation. TEMPERED GLASS As befits a gaming PC case, Logic Atos features tempered glass on the side of the case. It was intentionally limited to the side panel only, in favour of the airy front panel. 160 mm CPU COOLING The mounting space for a CPU air cooler with a maximum height of 160 mm is an optimal amount of space for powerful cooling systems, especially for such a compact case. In addition, the possibility to mount graphics cards up to 290 mm allows the installation of most high-performance components available on the market. OPTIMAL AIRFLOW The ventilated front panel provides an air intake with two high-performance 120mm fans. This effectively cools down the installed components inside the PC, and has a positive impact on the cooling performance and service life of the PC components. As an option, two 140 mm fans can be installed at the front of the case instead of the pre-installed ones. ARGB BEAUTY A gaming case has to look good. This is why the pre-installed ARGB fans add to the beauty of the case and the gaming stand. The colour of the backlighting can be freely changed from the predefined settings by pressing the RESET button on the case control panel. HOME & OFFICE Despite its gaming pedigree, the case is also suitable for office tasks and everyday work. The possibility to build a versatile and high-performance PC is a definite advantage. OPTIMISED AND PRACTICAL SOLUTIONS The installation of HDD or SSD is of course also well thought out here. Inside the case, there is a basket for 2 x 3.5 or 2.5 HDDs at tunnel level and on the mainboard tray, an additional 1 x 2.5'' drive can be installed (prior to the installation of the mainboard). SIMPLE INSTALLATION Everything here is well thought-out and intuitive. Building a PC with this case is a pleasure and is child's play. CONVENIENT ACCESS TO THE TOP PANEL Convenient access to the top panel with two USB 2.0 and one USB 3.0 ports, HD audio jacks for headphones and microphone, power and reset button (for controlling the ARGB backlighting). POWER SUPPLY IN THE TUNNEL The small openings under the PSU mounting position act as a filter to prevent dust and dirt from entering the case. At the same time, they provide an air flow to the PSU. 4 PCIe expansion card slots Four PCIe extension card slots. This is the optimal number for the installation of e.g. graphics cards and network cards. IDEAL FOR EVERY ROOM Supporting mini-ITX and Micro-ATX motherboards, it is a compact solution for building a computer for study, work and play. It takes up less space in the room than other standard ATX cases, yet is highly functional.
LUPUS 71 CASE Lupus 71 is a new case from the iBOX brand designed for gamers. The power supply is mounted at the bottom in a special tunnel that separates it from the rest of the case. In addition, the housing is equipped with a set of filters limiting dust access to the interior. It has a USB 3.0 port and two USB 2.0 ports. At the front, attention is drawn to the fan and the strip with RGB backlight. The case has a total of two 120 mm fans (a fan with backlight in the front and a 120 mm fan mounted on the back of the case). The side window is made of tempered glass. This interesting combination of 3 materials (glass, metal and plastic) make Lupus 71 an extremely interesting proposition.
Lupus 27 case Lupus 27 is a new case from the iBOX brand. This time we get extremely interesting combinations of tempered glass on the side panel of the housing with a front made of a special mesh, under which there are RGB fans. This interesting combination gives the housing a unique look and makes your gaming stand look even better. The case is designed with gamers in mind. The power supply is mounted at the bottom in a special tunnel that separates it from the rest of the case. In addition, the housing is equipped with a set of filters limiting dust access to the interior. It has a USB 3.0 port and two USB 2.0 ports. Three 120mm RGB backlit fans are mounted on the front and one 120mm fan is mounted on the back of the case. The side window is made of tempered glass. This interesting combination of 3 materials (glass, metal and plastic) makes Lupus 27 an extremely interesting proposition.
Product kirjeldus: be quiet! Pure Base 500FX - Torn - ATX Product Type: System cabinet Form Factor: Torn Windowed Side Panel: Jah, tempered glass värv: must I/O Ühendusi: 1 x USB 3.2 Gen 1 1 x USB 3.2 Gen 2 1 x kõrvaklapid 1 x microphone Supported Motherboards: ATX, microATX, Mini-ITX System Cabinet Features: Front dust filter, bottom dust filter, toetab 120/140/240/280/360 mm radiator in front panel, toetab 120/140 mm radiator in rear, toetab 120/240 mm radiator in top Power Device: No toiteplokk (ATX / PS/2) mõõtmed (WxDxH): 23.2 cm x 45 cm x 46.3 cm kaal: 8 kg Manufacturer Warranty: 3-year garantii
