The card reader by Delock can be used for reading and writing memory cards and can be connected to the USB-C™ interface of e.g. PCs, laptops, MacBooks, Chromebooks or smartphones.
Caruba produces a wide range of high-quality photo & video accessories. The Caruba Cardreader XQD USB 3.0 is a compact and lightweight memory card reader and allows you to quickly transfer files from your XQD USB 3.0 card to your computer. Characteristics Windows/Mac Compatible LED Status Indicator light Plug & Play. In the box: Caruba Cardreader XQD USB 3.0
LSB01 is a SilverStone designed RGB light strip control box with 8 port signal control. For use in conjunction with SilverStone LS02, it easily expands the amount of lighting that one can control and solves the problem of insufficient RGB 4pin connectors. It can control light via motherboard RGB software or other RGB 4pin host. Apart from this, for those enthusiast‘s motherboard that lacks RGB 4pin or without another signal source, the LSB01 can still offer direct control via case switch with an included cable adapter.
PP07 is an individually sleeved extension power cable set that is useful for system with large case or motherboards and to also improve cable management. This is a great addition to any user that wishes to optimize airflow and appearance inside their case. SST-PP07-IDE6R
PP07 is an individually sleeved extension power cable set that is useful for system with large case or motherboards and to also improve cable management. This is a great addition to any user that wishes to optimize airflow and appearance inside their case. SST-PP07-PCIR
Description This Card Reader by Delock enables you to read and write 64 different memory cards on your laptop or PC. The Card Reader can be connected to the USB 3.0 interface in order to achieve a faster data transfer rate of up to 5 Gbps (SuperSpeed). Furthermore the USB 3.0-A connector is compatible to its forerunners USB 2.0 and USB 1.1. Thus you can still connect the Card Reader to a USB 2.0 or USB 1.1 port. Specification • Connector: 1 x USB 3.0 Type Micro-B female > 1 x CF slot 1 x SD / MMC slot 1 x Micro SD / M2 slot 1 x MS slot 1 x xD slot • Data transfer rate up to: SuperSpeed USB 5 Gbps, Hi-Speed 480 Mbps, Full-Speed 12 Mbps, Low-Speed 1.5 Mbps • Supports removeable disk mode • Supports PIO, DMA, UDMA mode • Supports UDMA 7 • LED indicator for power and access • Dimensions (LxWxH): ca. 67 x 60 x 12 mm • Hot Swap, Plug & Play • Supports following memory cards: Slot 1 CF I, CF II, CF 4.0, CF Extreme, CF Extreme III, CF Extreme IV, CF Extreme IV UDMA, UDMA Extreme, UDMA 6 Extreme Pro, ULTIMA II, Micro Drive, Magicstor Slot 2 SD, SD High Capacity (SDHC), SDXC, SD Ultra II, SD UDMA II, SD Extreme III, SDHC Turbo, SDHC Ultra, SDHC Extreme, SDHC Extreme III, Turbo-SD, Turbo Mini SD*, Mini SD*, Mini SDHC*, MMC-I, MMC-II, MMC plus, MMC plus Turbo, HS-MMC, HC-MMC, MMCmobile*, MMCmobile* Dual-Voltage, RS-MMC*, RS-MMC 4.0* Slot 3 MS, High Speed MS (HS-MS), MS-ROM, MS Magic Gate, MS Pro, MS-Pro Magic Gate, MS-Duo, MS-Duo Magic Gate, MS-Pro Duo, MS-Pro HighSpeed, MS-Pro HG-Duo, MS-Pro Duo Magic Gate Slot 4 xD, xD type M, xD type H Slot 5 MS Micro (M2) Slot 6 MicroSD, Micro SDHC, Micro SDHC Turbo, T-Flash, MMCmicro *Adapter is required System requirements • Windows Vista/Vista-64/7/7-64/8/8-64/8.1/8.1-64/10/10-64, Mac OS 10.7 • PC or laptop with a free USB Type-A port Package content • USB 3.0 Card Reader All in 1 • Micro USB 3.0 to USB 3.0-A cable • User manual
PP07 is an individually sleeved extension power cable set that is useful for system with large case or motherboards and to also improve cable management. This is a great addition to any user that wishes to optimize airflow and appearance inside their case. SST-PP07-MBW
PP07 is an individually sleeved extension power cable set that is useful for system with large case or motherboards and to also improve cable management. This is a great addition to any user that wishes to optimize airflow and appearance inside their case. SST-PP07-MBR
The SilverStone ECU04-E is a PCI-E Gen 2.0 x2 expansion card with one internal 19pin USB 3.1 connector (supporting two ports). It adds two redriver chips over the original ECU04 design for vastly improved performance over longer cable connections. This ensures dual 10Gbps bandwidth transfer rate can be maintained for up to 2 meters* compared with just 1 meter per USB 3.1’s specified limitation. The ECU04-E is also backwards compatible with USB 3.0/2.0/1.1 and supports UASP (USB Attached SCSI Protocol) for enhanced performance. For operating systems with XHCI (eXtensible Host Controller Interface), the ECU04-E will easily install without the need for any drivers because it also supports XHCI. For those looking to upgrade or add additional USB 3.1 ports or devices to their computer, the ECU04-E is a great starting point. SST-ECU04-E
Lexar Professional Workflow CFexpress 4.0 Type B Card Reader, designed to pair with Lexar Professional Workflow, USB-C cable/ USB-C to USB-A adapter, Compatible with PC Computers, Laptop, Tablet, Smartphone. Lexar Professional Workflow CFexpress 4.0 Type B Card Reader, designed to pair with Lexar Professional Workflow, USB-C cable/ USB-C to USB-A adapter, Compatible with PC Computers, Laptop, Tablet, Smartphone Made to pair with the Lexar Professional Workflow and the Lexar Professional CFexpress 4.0 Type B Card Diamond Series, the Workflow CFexpress 4.0 Type B Card Reader supports transfer speeds up to 40GBps to maximize your workflow. Made to pair with the Lexar Professional Workflow and the Lexar Professional CFexpress 4.0 Type B Card Diamond Series, the Workflow CFexpress 4.0 Type B Card Reader supports speeds up to 40Gbps to maximize your workflow and an aluminum finish that offers superior scratch resistance even with heavy use on location. Supports the latest generation CFexpress 4.0 and backwards-compatible with CFexpress 2.0 A specially crafted finish offers superior scratch resistance, making it great for on-location shoots Compatible with Lexar Professional Workflow and Workflow Go which lets you customize readers and portable SSDs for maximum efficiency Includes a USB-C to USB-C cable to easily connect with all your Type C devices
Ühilduvad mälukaardidmicroSD (TransFlash),microSDHC,microSDXC,SD,SDHC,SDXCSisemineEiSIM-kaardi tugiEiLiidese tüüpUSB 3.0Andmeedastuskiirus5000 Mbit/sToetatud Windowsi operatsioonisüsteemidJahToetatud Maci operatsioonisüsteemidJahToetatud Linuxi operatsioonisüsteemidJahToote värvValgePakendi tüüpKarpJuhendJahSertifikaatRoHS, CEPakendi mõõtmed (l x s x k)107 x 46 x 200 mmIsehäälestuvJah
CPF01 is a PWM fan splitter that connects 2 fans with a single motherboard PWM header. For those who require addition cooling in their systems, CPF01 will be the perfect solution for you. SST-CPF01
With SATA Revision 3.0 compliant devices now more popular than ever, SilverStone has created two suitable cables to match the higher bandwidth requirement with the CP07 (with 180° connector) and CP08 (with 90° connector). Unlike traditional SATA cables with metal clips that lose effectiveness with repeated usage due to scratching, the CP07 and CP08 achieves secure connection by utilizing precision designed and manufactured connector. Wrapped in attractive black / white sleeve and metallic layer for EMI protection, these new cables are great companions for running SATA 6Gb/s capable devices with optimum stability and style. SST-CP07
Tootja: LogiLink Tootegrupp: mälukaardilugeja, adapter välised ühendused: USB 3.0 Lisaandmed: USB 3.0 Mini kaart Reader, Space-saving versioon to take suitable, kaart Read/Write device for SD/SDHC/SDXC, Micro-SD/Micro-SDHC/Micro-SDXC, Max. data transfer rate Lisainfo: andmeleht
Original part number Y-9321 Product name Unitek USB3.0 to microSD/SD Card Reader, Y-9321 Producer Unitek Class of product Accessories for notebooks Basic information Basic information Type of product Card reader Connector type USB 3.0 Additional information two slats microSD and SD, simultaneously read data from two cards, Colour Silver Other information Other information Width 35 mm Height 11 mm Length 30 mm
RC03 is a high-quality PCIe x16 flexible riser ribbon cable developed primarily for the PIO chassis by SilverStone. This cable will enable the PIO based chassis to also be compatible with Mini-ITX builds that require installation of PCI Express expansion or graphics cards. In addition, it can be used for any other chassis or applications in which an extension is required for PCI Express cards. SST-RC03B-220
