The MikroTik 100 Gigabit product line keeps growing: QSFP28 module for distances up to 100m MikroTik 100 Gigabit product line keeps growing: QSFP28 module for distances up to 100m Add this QSFP module for distances up to 100 meters to your CCR2216, CRS504 or CRS518 setups and enjoy real speed and ultimate reliability. This optical module offers four independent full-duplex channels with up to 25 Gbps per channel bandwidth and an aggregate bandwidth of 100 Gbps. The module has built-in digital diagnostic functions such as optical power monitoring.
TSW030 on kuluefektiivne haldamata Ethernet-kommutaator, millel on kaheksa 10/100 RJ45 porti ja integreeritud DIN-riba paigaldus. See kompaktne ja vastupidav 8-portiline kommutaator sisaldab 2-poolset toitesisendit ja madalat energiatarbimist, mis on kuni 0,5 W tühikäigul ja maksimaalselt kuni 1,5 W. Tänu sellele sobib see plug-and-play lüliti ideaalselt tööstuslikesse rakendustesse, kus on vaja ühendada kuni kaheksa seadet. 2-POOLNE TOITESISENDLihtne ja tööstusrakendustesse sobivMADAL ENERGIATARVETühikäigul kuni 0,5 W, maksimaalselt kuni 1,5 WINTEGREERITUD DIN-RÖÖPMELLihtne paigaldus plug-and-play kasutuselevõtuks8 X RJ45 PORTSKaheksa 10/100 Mbit/s Ethernet-porti
Original part number NIC-GX1 Product name Gembird 1-GIGABIT PCI-Express Fast Ethernet Card, Realtek chipset Producer Gembird Class of product Network card LAN network architecture GigabitEthernet Destination. PC computer External connector RJ45 Type of bus connector PCI-E 1x Wake On Lan function no data Operating system Microsoft WindowsMac OSUNIXLinux Supported protocols and standards IEEE 802.3ab - 1000BaseTIEEE 802.3u - 100BaseTXIEEE 802.1Q-in-Q - VLAN TagIEEE 802.1p - PriorityIEEE 802.3x - Flow Control Chipset Realtec Additional information Single STP RJ45 port for either1000 Mbps, 100 Mbps or 10 Mbps network speedsSupports speed auto-negotiation, pair swap/polarity/skew correctioncrossover detectionAutomatic IRQ and I/O address setupSupports Full Duplex flow control (IEEE 802.3x), power saving, Wake-on-LANremote wake-up, PCI Message Signaled Interrupt (MSI)Chipset: RTL8111CDimensions: 120 x 80 x 20 mm, x1 slotNet weight: 32 g
Original part number POE-24-AF5X Product name Ubiquiti POE-24 Gigabit Ethernet adapter for AF5X - PoE 24V, 1A, 24W Producer Ubiquiti Networks Class of product
Original part number UAP-AC-M-PRO-5 Product name Ubiquiti UniFi UAP AC PRO Mesh 802.11AC 3x3 Outdoor AP, 802.3af PoE - 5 PACK !! Producer Ubiquiti Networks Class of product
Improved Noise Immunity The NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Innovative Mechanical Design • Built-in mechanical tilt The mounting bracket conveniently offers 20° of uptilt and up to 20° of downtilt. • Quick assembly The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the NanoBeam on the pole. • Easy removal The antenna feed can be detached with the push of a button. Corrosion Resistance • Fasteners GEOMET®-coated for improved corrosion resistance when compared with zinc-plated fasteners.
In-Wall 802.11ac Wave 2 Wi-Fi Access PointThe sleek and elegant UniFi In-Wall HD AP transforms an Ethernet wall connection into a simultaneous, dual-band 802.11ac Wi-Fi Access Point with 4x4 MIMO technology. For high-density environments, such as hotel suites and meeting rooms where there are numerous clients in a relatively small space, we recommend the UniFi IW HD AP. Both Wave 1 and Wave 2 APs offer 28 independent (non-overlapping) channels: three for the 2.4 GHz band and twenty-five for the 5 GHz band, including DFS channels.When you use the 2.4 GHz band in a high-density location, you encounter self-interference and channel saturation. When you use the 5 GHz band, you can deploy smaller cells (coverage areas), so you can support more clients in any cell that deploys more than one AP.With the advantages of MU-MIMO technology and 4x4 spatial streams, the UniFi IW HD AP can support more than triple the number of users than a typical Wave 1 AP.Superior Processing PowerThe UniFi IW HD AP is capable of complex operations (guest control, filtering, and other resource-intensive tasks) that may slow down a lesser-equipped AP.Power over Ethernet (PoE) StandardThe UniFi IW HD AP can be conveniently powered by an 802.3af or 802.at compliant switch. We recommend powering your UniFi devices with a UniFi PoE Switch.Quick and Simple InstallationThe UniFi IW HD AP has a refined industrial design and can be easily installed using the included mounting hardware.
The UFiber splitter carries data from a UFiber OLT’s long-haul cable and shares it with multiple UFiber ONUs. Available with 4, 8, 16, or 32 outputs. PLC Splitters UF-SPLITTER-4 UF-SPLITTER-8 UF-SPLITTER-16 UF-SPLITTER-32 Input (1) SC/APC (1) SC/APC (1) SC/APC (1) SC/APC Outputs (4) SC/APC (8) SC/APC (16) SC/APC (32) SC/APC Insertion Loss with Connectors 7.4 dB 10.5 dB 13.7 dB 17.0 dB Uniformity Loss 0.6 dB 0.8 dB 1.2 dB 1.5 dB Polarization Dependent Loss 0.3 dB 0.3 dB 0.3 dB 0.3 dB Wavelength Bandwidth 1260-1650 nm 1260-1650 nm 1260-1650 nm 1260-1650 nm Return Loss (All Ports) 50 dB 50 dB 50 dB 50 dB Directivity 55 dB 55 dB 55 dB 55 dB Fiber Type G657A1 G657A1 G657A1 G657A1 Operating Temperature -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) Total Length 4.06m (13.32') 4.06 m (13.32') 4.06 m (13.32') 4.08 m (13.39') Weight 58 g (2.0 oz) 62 g (2.2 oz) 110 g (3.9 oz) 160 g (5.6 oz)
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 3 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Local Area võrguseade arhitektuur: 1000Base-T Wi-Fi võrguseadeing Form Factor: External Uplink Port Type1000Base-T Total Ports: 2 Switching Protocol1a/b/g/n/ac Device Location: External Wi-Fi Band sagedus122 m Status Indicator: Activity Status krüpteering Algorithm1Q(VLAN) IEEE 802.3at võrguseadeing Features: Dual Band Power over Ethernet plus (PoE+) Wi-Fi Multimedia (WMM) antenn1(USB Type-C) LAN: 2 (RJ-45) Power Device Location1mm laius (mm): 220 mm Nominal kaal10 °C Minimum Operating Humidity: 5 % garantii Products Returnable12 month(s) Warranty Validation Criteria: Serial Number Pack kaal Brutto (kg)1Box kaal Brutto (kg): 0.65 kg Retail Packaging Netokaal Carton1Package Type: Box1
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
Xtreme Wireless AC1200 Dual Band USB Adapter Draft 802.11ac support, up to 867 Mbps data rate Backward Compatible with 802.11a/b/g/n, 2.4/5Ghz High speed USB 2.0 interface WEP, WPA, WAP2 encryption support. Support WPS (PIN or PBC methods), external WPS button to connect Access Point easily Flash like formfactor Without USB cradle
netFiber 9 is a powerful outdoor switch with SFP SFP+ and Gigabit Ethernet. It features a powerful ARM v7 CPU 256 MB of RAM 4x 10G SFP+ ports and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in so you don’t have to rely on the DC jack for powering in tight hard-to-reach spots. There is a console port followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why Mikrotik designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet.There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws so you can attach the netFiber to a pole wall or mast right away.netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports a powerful CPU and a rugged case netFiber 9 is a real bargain that will make your network management so much easier!
"26-Port Cloud Managed Desktop Switch with 24-Port PoE > Meets the requirements of IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3ab,IEEE802.3z standards. > Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards. > Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE. > A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof."
5GHz, 26", 30dBi dual pol. antenna, need Rocket M5.Carrier Class Performance. Breakthrough Price Points. Instantly pair with Rocket M5 to create powerful 2x2 MIMO PtP Bridging applications. Rocket mount and weatherproof RF jumpers included.Rocket M Seamlessly Integrates with Rocket Dish Antenna. Rocket M and AirMax BaseStation/Rocket Antennas have been designed to seamlessly work together. Installing Rocket M on AirMax BaseStation/Rocket Antennas requires no special tools, you simply snap it into place with the mount provided with the Antennas.
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.25 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: kollane
LTU-LiteIncorporating Ubiquiti’s proprietary LTU technology, the LTU-Lite is a 5 GHz radio with an integrated antenna design for use as a PtMP CPE. LTU technology breaks through the limitations of 802.11 Wi-Fi technology and supports 1024 QAM for superior performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. PtMP CPE 1024 QAM 10/20/30/40/50 MHz channel bandwidth Central configuration management from AP side Frequency split Auto power adjustments Router mode support Functions in a PtMP environment with the LTU-Rocket as the basestation Featuring an integrated antenna, the LTU Lite is a compact, cost-effective subscriber station utilizing the 5 GHz radio band. It functions as a CPE (Customer Premises Equipment) in a Point-to-MultiPoint (PtMP) environment with the LTU Rocket® as the basestation.Proprietary LTU TechnologyBased on Ubiquiti’s LTU technology, the LTU Lite is not impeded by the limitations of standard 802.11 Wi-Fi technology. Its custom LTU silicon and radio architecture provide up to 600+ Mbps (1) of real TCP/IP throughput and modulation rates of up to 4096QAM (2). (1) 1+ Gbps with future firmware upgrade. (2) Available with future firmware upgrade.CPE ModesThe LTU Lite supports both bridged and built-in hardware NAT router modes to suit your specific deployment.Frequency SplitThe LTU Lite can use different frequencies for TX and RX to avoid interference.Convenient Mount OptionsThe LTU Lite is designed for quick yet reliable mounting on a pole or on a wall. All necessary mounting hardware is included.
The TP-Link Omada EAP772 V1 is a sophisticated wireless access point technology, crafted to cater to the needs of modern businesses and high-density environments. It supports Wi-Fi standards, including IEEE 802.11ax (Wi-Fi 6) and IEEE 802.11be, along with Bluetooth 5.2, offering a broad range of connectivity options. Capable of supporting a maximum of 24 SSIDs and over 380 connected devices, it is suitable for large-scale deployments.Security is a critical concern for any network, and the TP-Link Omada EAP772 V1 stands out in this aspect. It provides a variety of encryption algorithms, including WPA3-Personal and Enterprise, reinforced by RADIUS and SSID authentication methods. This ensures that your network is secure against external threats and data breaches. Additionally, features like Omada Mesh technology, seamless roaming, and cloud management capabilities make network setup and maintenance efficient and straightforward.The device's performance is noteworthy, with a maximum data rate of 11 Gbps across the 2.4 GHz, 5 GHz, and 6 GHz bands. It is engineered to accommodate the requirements of high-density environments, ensuring smooth and reliable connectivity for every user. With flexible deployment options, including PoE support and a wall/ceiling-mountable form factor, the TP-Link Omada EAP772 V1 is a versatile solution adaptable to various settings and applications.
