Operational superiority - IP67 weather resilient Outdoor Access Point (AP) with 512 max concurrent client associations, 16 SSIDs, WPA-2 encryption, Meshing, Dynamic VLANs, DFS channels, Access control lists (ACL), zero touch provisioning and more – the 802.11ac wave2 powered e700 is perfect for today’s demanding high density outdoor Wi-Fi networks.High performance Wi-Fi - Standards based beamforming, on 5 GHz over a 4x4 Tx/Rx antenna array, can steer beams to the target client device delivering superior performance under high interference RF environments in both downlink and uplink* directions. Enterprise grade controller-less roaming, dynamic channel selection, automatic transmit power control, and more such cnPilot platform features ensure a high grade superior Wi-Fi network.Mesh - Rapidly setup multi-hop mesh networks either dedicating one radio (e.g.: 5 GHz) for mesh backhaul, or using both bands for simultaneous client and mesh access.Wireless Backhaul Integration - Roll out Wi-Fi networks rapidly with Cambium’s wireless backhaul powered from the aux PoE Out port on the e700 eliminating the need for a second power line. The aux PoE Out port can also power an 802.3af camera when security monitoring is needed near the hotspotResilience Dual on-board Active/Standby memory banks ensure higher availability. The e700 can store two versions of the software and if needed fall back to a working operational software, reducing the likelihood of site visits and increasing network up-time.
QuMax for Teltonika RUTX11 Integrated outdoor LTE high power directional antenna + outdoor Wi-Fi dual band 2.4 & 5 GHz omni antenna + Bluetooth antenna + GPS antenna + place to install Teltonika RUTX11 (All-in-one) QuMAX offers the most powerful directional LTE antenna of all QuWireless antennas. It is dedicated to connections with long distance to base station. It is designed to have Teltonika RUTX11 router installed inside IP67 enclosure. It is the first choice for fixed installations in industrial environment. It also has embedded GPS antenna, Bluetooth antenna and outdoor Wi-Fi dual band 2.4 & 5 GHz omni antennas. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support Easy to install Dual SIM – significantly reduce roaming costs
QuMax for Teltonika RUTX09 Integrated outdoor multi band high power LTE directional antennas + GPS antenna + place to install Teltonika RUTX09 (All-in-one) QuMAX offers the most powerful directional LTE antenna of all QuWireless antennas. It is dedicated to connections with long distance to base station. It is designed to have Teltonika RUTX09 router installed inside IP67 enclosure. It is the first choice for fixed installations in industrial environment. It has embedded also GPS antenna. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support Easy to install Dual SIM – significantly reduce roaming costs
CAT7 SSTP Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel. Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
CAT7 SSTP Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel. Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
CAT7 Flat Extension Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 Flat Network Extension Cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper. Network Extension Cable are excellent for extending of your LAN connection to your HDTV Blu Ray Player Home Theater XBox 360 PS3 etc. Used for network adapters hubs switches routers DSL/Cable modems patch panels and other twisted-pair applications.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Extension Cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
Schutzkontakt-Steckdosenleiste, mit sechs Anschlüssen, erhöhter Berührungsschutz, zweipoliger Ein-/Ausschalter, Dreipunktauflage zur Festmontage mit Schrauben, innovativer Flachstecker, Stecksystem DE (Stecker-Typ F)
16 x Gigabit PoE+ ports 240W PoE power budget 32Gbps switching capacity Hardened IP30 rated metal switch Includes DIN-rail and wall mounts Operating temperature range of -40° – 75° C (-40° – 167° F) Redundant power inputs with overload current protection Alarm output triggered by power failure Power supply sold separately (models: TI-S24048, TI-S48048) TRENDnet's 16-Port Industrial Gigabit PoE+ DIN-Rail Switch, model TI-PG160, has sixteen gigabit PoE+ ports with a 240W PoE power budget. Users are able to connect sixteen PoE+ devices to the industrial PoE switch, while still providing two gigabit ports for additional network connections. The industrial PoE switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. PoE Power A 240W PoE+ power budget supplies up to sixteen Power over Ethernet devices with PoE+ power. Fault Tolerance The industrial PoE switch features redundant power inputs with output alarm relay. Industrial Design Equipped with a rugged IP30 rated housing, designed to withstand a high degree of vibration and shock, and operate within a wide temperature range of -40 – 75° C (-40 – 167° F). PoE+ Power Budget Supplies up to 30W of PoE/PoE+ power per port on the industrial PoE switch with a 240W PoE power budget Network Ports Industrial PoE switch with 16 Gigabit PoE+ ports DIN-Rail/Wall Mounts IP30 rated metal enclosure with included DIN-rail and wall mount hardware Switching Capacity 32Gbps switching capacity Redundant Power Redundant power inputs with overload current protection (power supply sold separately models: TI-S24048 / TI-S48048) Alarm Relay Alarm relay triggered by power failure of primary and/or redundant power Jumbo Frame Sends larger packets, or Jumbo Frames (up to 9KB), for increased performance Extreme Temperatures Industrial PoE switch rated for an operating temperature range of -40 – 75° C (-40 – 167° F) Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) Grounding Point Grounding point on the industrial PoE switch protects equipment from external electrical surges
Product kirjeldus: Edimax Pro IEEE 802.3at Gigabit PoE+ Extender - repeater - 10Mb LAN, 100Mb LAN, GigE seadme tüüp: Repeater - RJ-45 / RJ-45 Form Factor: Desktop Cabling Type: 10Base-T, 100Base-TX, 1000Base-T Data Link Protocol: 10Mb LAN, 100Mb LAN, GigE Max Transfer Distance: 100 m Power Over Ethernet (PoE): PoE+ mõõtmed (WxDxH): 7.93 cm x 8.68 cm x 2.58 cm kaal: 200 g
16 x Gigabit-porti 32 Gbps kommutatsioonivõimsus Karastatud IP30 klassifikatsiooniga metallist korpus Sisaldab DIN-riba paigalduskinnitust Töötemperatuuri vahemik -40° - 75° C (-40° - 167° F) Toetab LACP, STP/RSTP, VLAN ja IGMP Snooping'i IEEE 802.1p QoS koos järjekorra ajastamise toetusega Sageduspiirangu juhtimine pordi kohta Redundantsed toitesisendid koos ülekoormusvoolukaitsega Alarmiväljund, mis käivitub voolukatkestuse korral TRENDneti 16-portiline tööstuslik Gigabit L2 hallatav DIN-Rail switch, mudel TI-G160i, pakub täiustatud haldusfunktsioone koos 32 Gbps lülitusvõimsusega. Kasutajatel on võimalik lülitiga ühendada kuusteist seadet kiireks gigabitvõrguühenduseks. Lüliti on varustatud IP30 klassifikatsiooniga metallkorpusega, mis on kavandatud taluma tugevat vibratsiooni ja lööki ning töötama laias temperatuurivahemikus -40° - 75° C (-40° - 167° F) tööstuskeskkondades. Täiustatud liiklusjuhtimise kontroll, tõrkeotsing ja SNMP-seire tugi teevad sellest võimsa lahenduse VKE-võrkudele. Löögi- ja vibratsioonikindel Tööstuslikud 2. kihi hallatavad lülitid on hinnatud löögi- (EN 60068-2-27), vabalangemise (EN 60068-2-32) ja vibratsioonikindlaks (EN 60068-2-6). Integreerimise paindlikkus Hallatava 2. kihi funktsioonide hulka kuuluvad VLAN, IGMP snooping, QoS, RMON, SNMP trap ja syslog jälgimiseks ja paindlikuks võrguintegratsiooniks. Tööstuslik disain IP30-klassi metallkorpusega varustatud tööstuslik hallatav 2. kihi kommutaator töötab laias temperatuurivahemikus -40° - 75° C (-40° - 167° F). Võrgupordid 16 gigabitist pesa Liikluse juhtimine Lai valik võrgukonfiguratsioone on toetatud: 802.3ad linkide koondamine, privaatne VLAN, 802.1Q VLAN, RTSP, Loopback Detection, 802.1p teenuseklass (CoS), portide ribalaiuse haldamine ja QoS järjekordade ajastamine. Juurdepääsu kontroll Sellised funktsioonid nagu ACL, MAC/portide filtreerimine, 802.1X ja RADIUS ühilduvad mitmekihilise juurdepääsukontrolliga. Seire RMON, SNMP, SNMP Trap ja portide peegeldamine toetavad administraatori järelevalvelahendusi. DIN-riba paigaldus IP30 klassifikatsiooniga metallist korpus sisaldab DIN-riba paigalduskinnitust Lülitusvõimsus 32 Gbps lülitusvõimsus Redundantne toide Redundantsed toitesisendid koos ülekoormusvoolukaitsega (toiteallikas müüakse eraldi: TI-M6024) Häirerelee Häirerelee, mis käivitub esmase ja/või üleliigse toiteallika voolukatkestuse korral. Jumbo Frame Saadab suuremaid pakette ehk Jumbo Frame'i (kuni 10 KB), et suurendada jõudlust. Ekstreemsed temperatuurid Tööstuslüliti on arvestatud laiale töötemperatuuri vahemikule -40 - 75° C (-40 - 167° F). Löögi- ja vibratsioonikindel Hinnatud löökidele (EN 60068-2-27), vabalangemisele (EN 60068-2-32) ja vibratsioonile (EN 60068-2-6). Maanduspunkt Maanduspunkt kaitseb seadmeid väliste vooluülekannete eest.
Seda Delocki USB 2.0 ja RS-232 kaablit saab kasutada CISCO ruuterite, kommutaatorite, pääsupunktide ja muude ühilduvate seadmete konsooli juhtimiseks arvuti või sülearvuti kaudu. Spetsifikatsioon - Ühendused: 1 x USB 2.0 Type-A isane 1 x jada RS-232 RJ45 pesa - Kiibistik: FTDI FT232RL - Ühildub USB 3.0, USB 2.0 ja USB 1.1 täiskiirusega 12 Mbit/s. - Andmeedastuskiirus kuni 230,4 Kbit/s - Kaabli pikkus koos pistikutega: ca. 1,8 m - Sobib erinevate CISCO seadmetega Süsteeminõuded - Linuxi tuum 2.6 või uuem - Windows 7/7-64/8.1/8.1-64/10/10-64/11 - PC või sülearvuti, millel on vaba USB A-tüüpi port Pakendi sisu - USB 2.0 ja 1 x jadaadapter - Draiveri CD - Kasutusjuhend
16 x Gigabit RJ-45 portsSturdy metal switchBuilt-in power supply32Gbps forwarding capacityFanless design1U 19” rackmount brackets includedNDAA / TAA compliant (U.S. and Canada only)The 16-Port Gigabit Switch, model TEG-S17, provides high-bandwidth performance, ease of use, and reliability. Boost office network efficiency and eliminate network congestion with gigabit speeds and a total switching capacity of 32Gbps with full-duplex mode. A built-in universal power supply reduces cable clutter, and diagnostic LEDs help with network troubleshooting. Plug and play this sturdy metal switch for reliable high-speed network connectivity.Gigabit SpeedsGigabit ports provide high-speed network connections to 16 devices, and a 32Gbps switching capacity allows data traffic to flow smoothly, reducing traffic bottlenecks.Rackmount DesignWith a sturdy metal housing and included rackmount brackets, this switch is well-suited for 19” 1U rack installations.FanlessFanless design lowers energy consumption and reduces distracting operating noise.Plug and PlaySimply power up the switch and plug in connected devicesPorts16 x Gigabit Ethernet portsSwitching Capacity32Gbps switching capacityRackmount DesignWith a sturdy metal housing and included rackmount brackets, this switch is well-suited for 19” 1U rack installationsJumbo FrameSends larger packets, or Jumbo Frames (up to 9KB), for increased performanceFanlessFanless design lowers energy consumption and eliminates operating noiseLED IndicatorsLEDs convey power, link and activityInternal Power Supply100~240VAC, 50/60Hz internal universal switching power supply
14 x Gigabit PoE+ porti 2 x Gigabit SFP-pesa 240W PoE võimsuse eelarve 32Gbps lülitusvõimsus Karastatud IP30 klassifikatsiooniga metallist lüliti Sisaldab DIN-riba kinnitust ja seinakinnitusklambreid Lai töötemperatuurivahemik -40° - 75°C (-40° - 167°F) Mitu sisendit tagavad üleliigse voolu kaitsega redundantse võimsuse Alarmiväljund, mis käivitub voolukatkestuse korral TRENDneti tööstuslikud Gigabit PoE+ DIN-riba lülitid pakuvad võrguühendust karmides keskkondades, säästes samal ajal paigalduskulusid ja seadistamisaega Power over Ethernet-tehnoloogia abil. Industrial Gigabit PoE+ DIN-Rail Switches on kõik vastupidava IP30-klassi metallist korpusega, mis on loodud taluma tugevat vibratsiooni ja lööki ning töötama nii kõrgetel kui ka madalatel temperatuuridel tööstuskeskkondades -40° - 75° C (-40° - 167° F). Meie karastatud tööstuslike PoE+ kommutaatorite mudelitel on vask Gigabit PoE+ pordid kiirete seadmete ühendamiseks ja SFP-pesad, mis toetavad 1000Base-FX-mooduleid pikamaa kiudoptiliste võrkude jaoks. Paigaldajad ja integraatorid saavad TRENDneti tööstuslike Gigabit PoE+ DIN-riba lülitite abil säästa seadmete kulusid ja vähendada paigaldusaega, kuna need pakuvad kuni 30 W PoE-toite ja -andmesidet ühe pordi kohta olemasolevate Ethernet-kaablite kaudu. Tänu PoE-tehnoloogiale nendes tööstuslikes PoE+-kommutaatorites vajavad kasutajad ainult ühte kaablikomplekti nii andmete kui ka toite edastamiseks. Võrgustage PoE-seadmed selle karastatud tööstusliku PoE+-kommutaatoriga, näiteks suure võimsusega traadita juurdepääsupunktid, IP-kaamerad, VoIP-telefonisüsteemid, IPTV-dekooderid, juurdepääsukontroll ja palju muud. PoE+ võimsus Sellel karastatud tööstuslikul PoE+ kommutaatoril on 240 W PoE+ võimsuse eelarve, mis varustab Power over Ethernet seadmeid 30 W PoE+ võimsusega pordi kohta. Redundantne toide Mitu toitesisendit tagavad selle tööstusliku PoE+ lüliti ülekoormusvoolukaitsega redundantse toite, mis vähendab võrgu seisakuid (toiteallikad müüakse eraldi). Tööstuslik karastatud disain Varustatud vastupidava IP30 klassifikatsiooniga korpusega, mis on kavandatud taluma suurt vibratsiooni ja lööki ning töötama laias temperatuurivahemikus -40° - 75° C (-40° - 167° F). PoE+ toide Tööstuslikud PoE+ lülitid varustavad Power over Ethernet seadmeid kuni 30 W PoE+ võimsusega pordi kohta. Gigabit-pordid Vask Gigabit PoE+ pordid kiireks seadmeühenduseks tööstusliku haldamata PoE+ kommutaatoriga ning SFP-pesad, mis toetavad 1000Base-FX mooduleid pikamaa kiudoptiliste võrkude rakenduste jaoks. DIN-riba / seinakinnitus Vastupidav tööstuslik PoE+ kommutaator IP30-klassi metallkorpusega, sealhulgas DIN-riba ja seinakinnituse riistvara. Redundantne toide Tööstuslike PoE+ lülitite mitu toitesisendit pakuvad ülekoormusvoolukaitsega redundantset toite (toiteallikas müüakse eraldi, mudel: TI-S48048). Häirerelee Häirerelee, mis käivitub esmase ja/või üleliigse toiteallika voolukatkestuse korral. Jumbo Frame Toetab suuremaid pakette ehk Jumbo raame (kuni 9 KB), et suurendada jõudlust.
The Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (PoE+) signal. Connect this device to a non-PoE Gigabit switch and then run an Ethernet cable for up to 100 meters (328 ft.) to network PoE+ or PoE devices. The integrated power supply reduces installation clutter.Full Duplex Gigabit speedsConverts a non-PoE Gigabit port to a PoE+ or PoE Gigabit portIntegrated power supplyNetwork distances of up to 100 meters (328 feet)Save on installation and equipment costs
