Asus Tootegrupp: traadita internet (WiFi) LAN device LAN võrguseade arhitektuur: traadita internet (WiFi) IEEE 802.11ac seadme tüüp: USB adapter määratud otstarve.: WLAN Port LAN: 1x USB 2.0 välise antenni liidesse tüüp: 2 x PIFA krüpteerimine: WEP - kaabelühendusega võrdeline turvalisus, WPA (PSK) - WiFi kaitstud ühendus (eeljagatud võtmega), WPA2 (PSK) - WiFi kaitstud ühendus 2 (eeljagatud võtmega) saadavalolevad ülekandekiirused: < 300 Mb/s, < 867 Mb/s töö režiim: ruuter sagedus: 2.4 GHz, 5 GHz Toetatud protokollid ja standardid: FCC Standard tarvikud: CD tarkvaraga, garantii kaart laius: 20 mm kõrgus: 7 mm sügavus: 14 mm Netokaal: 5 g andmeleht: spetsifikatsioon [LINK]
Seda Delocki paralleelset lülitit saab kasutada näiteks paralleelportiga printeri ühendamiseks kahte süsteemi lüliti abil. Ühe nupu abil saab käsitsi valida, milline süsteem peaks olema seadmega ühendatud. Lüliti jaoks ei ole vaja toiteallikat. Spetsifikatsioon - Ühendused: Sisend: 2 x paralleel D-Sub 25-poolne emane Väljund: D-Sub 25-pooluseline emasliides: 1 x paralleelne D-Sub 25-pooluseline - Mutritega naissoost pordid - 2 mehaanilist nuppu - Metallist korpus - Mõõtmed (LxSxK): ca. 123 x 92 x 30 mm - Värv: beež Süsteeminõuded - Vaba paralleelport - Ühenduskaablid Pakendi sisu - Lüliti - Kasutusjuhend
PLANET POE-173 Ultra Power over Ethernet Injector pakub kuni 60-vatist võimsust ja kiiret Ethernet-andmesideühendust kõikjal teie võrguinfrastruktuuris. PLANET Ultra Power over Ethernet lahendus sisaldab kahte täiesti uut toodet: ■ POE-173: 60-vatine Ultra Power over Ethernet-injektor. ■ POE-171S: 12V / 19V / 24V DC Power over Ethernet jaotur. Kiire ja lihtne Gigabit Ultra Power PoE võrgu juurutamine POE-173 on üheportiline Ultra Power over Ethernet injektor, mis annab kuni 60 vatti võimsust Ethernet-kaablite kaudu. See on loodud spetsiaalselt selleks, et rahuldada kasvavat nõudlust suurema võimsusega nõutavate võrguseadmete järele, nagu näiteks: ■ PTZ Speed Dome ■ AIO (All-in-One) puutearvuti ■ Kaugjuhitav digitaalne kuvar ■ Muud võrguseadmed, mis vajavad normaalseks tööks suuremat võimsust. POE-173 edastab Ethernet digitaalsed andmed koos 50 V alalisvoolu toitega üle keerdpaarkaabli 60-vattise Power over Ethernet Injectorina ja ühendatud Ultra Power over Ethernet splitter - POE-171S - eraldab digitaalsed andmed ja toite kolmeks valikuliseks väljundiks (12V / 19V / 24V DC), mille kaugus on kuni 100 meetrit. 60 vati võimsus üle 4-poolse UTP-ühenduse POE-173 ja POE-171S Ultra PoE lahendus kasutavad sama kaabeldusstandardit nagu IEEE 802.3at / af PoE. Selle asemel, et anda energiat üle 2-paarilise keeratud UTP - olgu see siis End-Span (Pin 1,2,3 ja 6) või Mid-Span (Pin 4,5,7 ja 8), pakub see võimsust kuni 60 vati võimsuse saamiseks, kasutades kõiki nelja paari standardset Cat5e / Cat6 Ethernet-kaablit. Uues 4-paarilises süsteemis kasutatakse nii andmepaaride kui ka varupaaride toiteks kahte PSE-kontrollerit. All-in-One ja kompaktse suurusega disain POE-173, mille kontseptsioonid on "lihtne paigaldada", "Plug and Play" ja "lihtne tõrkeotsing" äri- ja kodukasutajatele, on kõik-ühes, üheportiline PoE+ injektor koos sisemise toiteallikaga. Kompaktse suurusega korpuses on POE-173 esipaneelil üks 100-240 V vahelduvvoolu sisendpesa, kaks valgusdioodi (System POWER ja PoE ACTIVE ) ülaküljel ja kaks RJ-45 porti (POE port ja LAN port) tagapaneelil. Lihtsalt ühendage Ethernet-kaablid ja toitejuhe ning POE-173 on valmis pakkuma samaaegselt kiiret võrgukommunikatsiooni ja ülikiire PoE-injektori funktsioone, ilma et oleks vaja tarkvara konfigureerimist. Kiire ja lihtne kaablite paigaldamine PoE-võrgu kasutuselevõtuks POE-173 ühildub tagurpidi nii 802.3af kui ka 802.3at PoE standarditega ja võimaldab kasutajatel paindlikult kasutada standardseid ja suure võimsusega seadmeid, et edastada andmeid ja energiat üheaegselt ühe Ethernet-kaabli kaudu kuni 100 meetri ulatuses. POE-173 vabastab turva-IP-kaamera ja traadita AP kasutuselevõtu toitepistikupesa asukoha piirangutest ja täiendavast vahelduvvoolu juhtmestikust. See vähendab seega kaablite arvu ja välistab vajaduse elektripistikupesade järele seinal, laes või mis tahes kättesaamatus kohas ning eelkõige vähendab paigaldusaega.
16-Port Managed Gigabit Ethernet PoE+ Switch with 2 SFP Slots Compliant with IEEE 802.3at/af Power over Ethernet (PoE+/PoE), 374W, Endspan, 19" rack The most important thing It enables power supply and data transmission of up to 16 PoE network devices It saves time and money by using existing network cables for power and data transmission Powered Device Monitor (PDM) restarts any connected PoE device that is not responding or sending network traffic information.
Operational superiority - IP67 weather resilient Outdoor Access Point (AP) with 512 max concurrent client associations, 16 SSIDs, WPA-2 encryption, Meshing, Dynamic VLANs, DFS channels, Access control lists (ACL), zero touch provisioning and more – the 802.11ac wave2 powered e700 is perfect for today’s demanding high density outdoor Wi-Fi networks.High performance Wi-Fi - Standards based beamforming, on 5 GHz over a 4x4 Tx/Rx antenna array, can steer beams to the target client device delivering superior performance under high interference RF environments in both downlink and uplink* directions. Enterprise grade controller-less roaming, dynamic channel selection, automatic transmit power control, and more such cnPilot platform features ensure a high grade superior Wi-Fi network.Mesh - Rapidly setup multi-hop mesh networks either dedicating one radio (e.g.: 5 GHz) for mesh backhaul, or using both bands for simultaneous client and mesh access.Wireless Backhaul Integration - Roll out Wi-Fi networks rapidly with Cambium’s wireless backhaul powered from the aux PoE Out port on the e700 eliminating the need for a second power line. The aux PoE Out port can also power an 802.3af camera when security monitoring is needed near the hotspotResilience Dual on-board Active/Standby memory banks ensure higher availability. The e700 can store two versions of the software and if needed fall back to a working operational software, reducing the likelihood of site visits and increasing network up-time.
QuSpot for Teltonika RUTX09 Integrated outdoor multi band LTE omni antennas + GPS antenna + place to install Teltonika RUTX09 (All-in-one) QuSpot omni LTE antenna for Teltonika RUTX09 router is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It has embedded GPS antenna. If you use RUTX09 with QuSpot antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support Easy to install Dual SIM – significantly reduce roaming costs
Set of two separate eXtra Range LTE directional antennas for bi-directional connection to two different LTE base stations. The main antenna has integrated also dualband Wi-Fi GPS Bluetooth antennas and space to install Teltonika RUTX12. The second antenna is only directional LTE XR antenna.The QuMax XR2 a is bi-directional LTE eXtra Range antenna set (two separate antenna) two connect to two different LTE base station (it can also be connected to one base station in order to obtain a greater share of the transfer from that base station). The main antenna additionally has built-in Wi-Fi dual band GPS and Bluetooth antennas 2x Nf connectors for the second LTE antenna and a space to install the RUTX12 router inside antenna enclosure. The second antenna is LTE Extra Range directional antenna only and is in smaller enclosure. The QuMax XR2 set is dedicated to long-range connections from the LTE base station also to two different base stations which gives optimal use of functions such as load balancing and carrier aggregation.
Comprehensive PoE cable tester for network professionals Three testing modes with convenient dip-switch toggle Troubleshoot PoE issues in real-time For use with IEEE 802.3af/at/bt, and non-standard passive PoE devices PoE inline testing measures voltage, amperage, polarity, and wattage of the connected PD Four digit 7-segment LED display for clear and accurate readings User-friendly design with battery-free operation Compact and lightweight for on-the-go testing TRENDnet's Inline PoE Tester, model TC-NTP1, is a comprehensive PoE cable tester for network professionals. This compact tool accurately tests 4PPoE, PoE+, PoE, and passive PoE technologies. The TC-NTP1 PoE cable tester works on active connections, and is designed to sit inline between the PoE source and PoE device. The PoE cable tester then displays real-time PoE information such as wattage, voltage, and amperage for that connection. Testing Modes The TC-NTP1 has three testing functions: T-mode (for testing ports on your PSE device to determine the PoE switch's or injector's PoE type, and voltage output); N-mode (for non-standard passive PoE devices); and I-mode (for PoE inline testing, displaying voltage, amperage, and wattage of the connected PD). Step Button The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring. Compatibility The PoE cable tester is compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V. Ports Equipped with 1 x Gigabit port for PSE connection, and 1 x Gigabit port for PD connection Testing Modes The TC-NTP1 supports three testing functions. T-mode allows you to test your PSE device to determine the PoE switch's or injector's supported PoE standards, as well as voltage output. N-mode is used for non-standard passive PoE devices. I-mode is used for PoE inline testing, which displays the voltage, amperage, and wattage of the connected PD Toggle Switch Switch between testing modes using the convenient toggle switch located at the bottom of the PoE cable tester PoE Support PoE cable tester supports IEEE 802.3af/at/bt, and non-standard passive PoE devices Compatibility Compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V Blue LED Display Convenient front-panel 4-digit seven-segment LED display on the PoE cable tester cycles between voltage, wattage, and amperage readings LED Indicators LED indicators on the PoE cable tester convey PoE type (active/passive), sources, polarity, and power Step Button The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring User-Friendly TC-NTP1 PoE cable tester provides battery-free operation, and is ready for use right out of the box; just plug-in to start testing Compact Design Small and compact design of the PoE cable tester is perfectly pocketable for on-the-go PoE testing
Adapter CA1100E USB-C-Ethernet Wired Network Connection provides a direct and secure connection to the internet or LAN via a USB-C (male) connector for your devices USB-C or Thunderbolt 3 port, and an RJ45 (female) port for Ethernet Gigabit transfer speeds supports 10/100/1000 BASE-T performance Plug and Play Design uses native driver support to allow quick connections with Windows, Mac and Chrome operating systems, and USB-powered to eliminate the need for an external power source USB-C and Thunderbolt 3 compatible to accommodate the latest laptops and evolving computing environments Compact and lightweight making it an ideal travel accessory for on-the-go professionals
Product kirjeldus: Edimax Pro IEEE 802.3at Gigabit PoE+ Extender - repeater - 10Mb LAN, 100Mb LAN, GigE seadme tüüp: Repeater - RJ-45 / RJ-45 Form Factor: Desktop Cabling Type: 10Base-T, 100Base-TX, 1000Base-T Data Link Protocol: 10Mb LAN, 100Mb LAN, GigE Max Transfer Distance: 100 m Power Over Ethernet (PoE): PoE+ mõõtmed (WxDxH): 7.93 cm x 8.68 cm x 2.58 cm kaal: 200 g
8 x Gigabit PoE++ ports (up to 95W) 8 x Gigabit PoE+ ports (up to 30W) 2 x Gigabit SFP Slots 440W PoE power budget 36Gbps switching capacity Internal power supply Sturdy 1U 19” rack mountable metal housing
4 x Gigabit PoE++ ports (up to 95W) 4 x Gigabit PoE+ ports (up to 30W) 2 x Gigabit SFP Slots 240W PoE power budget 20Gbps switching capacity Internal power supply Fanless design for silent operation Sturdy 1U 19” rack mountable metal housing
A Micro SD memory card can be fitted into the Compact Flash adapter by Delock, which can be used in a Compact Flash slot of a device. The data transfer rate depends on the used memory card. Specification • Connectors: 1 x CF type I > 1 x Micro SD slot • Push to push Micro SD socket • Supports following memory cards: Micro SD, Micro SDHC, Micro SDXC • Supports memory: SDXC up to 2 TB (exFAT) SD 3.0 Class 2 / 4 / 6 / 10 and UHS-I Wireless SD and standard SDIO cards • Data transfer rate up to 25 MB/s • Dimensions (LxWxH): ca. 42.8 x 36.4 x 3.3 mm • Supports IDE UDMA and CF Fast DMA mode System requirements • A free CF slot Package content • CF adapter
Seda Delocki DisplayPort-kaablit saab kasutada DisplayPort-liidesega seadmete, nt kuvarite, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Kolmekordselt varjestatud kaabel toetab kuni Ultra HD (4K @ 60 Hz) resolutsiooni ja ühildub allapoole kuni Full-HD 1080p. Spetsifikatsioon - Liitmikud: 1 x DisplayPort 20-pini isane > 1 x DisplayPort 20-pini isane - DisplayPort 1.2 spetsifikatsioon - Pin 20 ei ole ühendatud - Kaabli gabariit: 28 AWG - Kaabli läbimõõt: umbes 7,3 mm - Vaskjuht - Kolmekordselt varjestatud kaabel - Nailonpunutisega - Kullatud pistikud ja metallist korpus - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 21,6 Gb/s - Resolutsioon kuni 3840 x 2160 @ 60 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Värv: antratsiit - Pikkus koos pistikutega: ca 5 m Süsteeminõuded - Vaba DisplayPort-liides Pakendi sisu - DisplayPort kaabel
AX1800 Mesh Wi-Fi 6 4G+ Modem Router with a 4-Port Gigabit Smart Switch and USB 3.0 Port Hero 4G+ Wireless Router, Available bandwidth 1800 Mbps Mesh, Wi-Fi 6 USB 3.0, 4x10/100/1000M Antenna Gain 5 dB, Number of antennas 4 4G, Included Accessories 4G antennas, Power adapter 12V 2A, Ethernet cable, Quick start guide Power supply requirements 100–240 V 50/60 Hz, Dimensions 214 mm x 154 mm x 33 mm
Paigaldamise tüüp35 mm DIN rööbasMaterjalMust ABS + PC plastik, S235JR terasMõõtmed90 x 70 x 25 mmKaasas kruvidPhilipsi paanipea kruvi #6-32×3/16; 2 tk.DIN 7985 M3 x 5 mm; 2 tkKaal68 g
