16-Port Managed Gigabit Ethernet PoE+ Switch with 2 SFP Slots Compliant with IEEE 802.3at/af Power over Ethernet (PoE+/PoE), 374W, Endspan, 19" rack The most important thing It enables power supply and data transmission of up to 16 PoE network devices It saves time and money by using existing network cables for power and data transmission Powered Device Monitor (PDM) restarts any connected PoE device that is not responding or sending network traffic information.
The EdgePower 54V 72W is a UNMS monitored and managed 54V DC power supply with integrated battery backup. This product provides WISPs with an easy-to-install 54V redundant power supply that includes a management user interface and simple 12V battery backup charger with multiple 54V outputs for small sites. 100-240VAC, 50-60 Hz, Universal Input 54V DC Output (terminal connector with dual DC barrel jack included) 12V Lead Acid Battery Input* Two, 10/100 Ethernet, 54V Passive PoE output, switch ports Ubiquiti offers EdgePower™ models for the specific requirements of your application: EP-54V-150W EP-24V-72W EP-54V-72W Versatile Design The rack-mountable EdgePower 54V features 54VDC and 2 RJ45 PoE Ports. UPS for WISP You can receive alerts in the event of a power outage, and the EdgePower 54V offers a 12V lead acid battery input for redundancy if the AC input fails over (battery not included). Management Flexibility Designed for convenient management, the EdgePower allows you to configure and monitor PSU features in a graphical user interface. You can also use UNMS (Ubiquiti® Network Management System) for remote management, and SNMP is available to monitor the EdgePower for issues that warrant attention.
Operational superiority - IP67 weather resilient Outdoor Access Point (AP) with 512 max concurrent client associations, 16 SSIDs, WPA-2 encryption, Meshing, Dynamic VLANs, DFS channels, Access control lists (ACL), zero touch provisioning and more – the 802.11ac wave2 powered e700 is perfect for today’s demanding high density outdoor Wi-Fi networks.High performance Wi-Fi - Standards based beamforming, on 5 GHz over a 4x4 Tx/Rx antenna array, can steer beams to the target client device delivering superior performance under high interference RF environments in both downlink and uplink* directions. Enterprise grade controller-less roaming, dynamic channel selection, automatic transmit power control, and more such cnPilot platform features ensure a high grade superior Wi-Fi network.Mesh - Rapidly setup multi-hop mesh networks either dedicating one radio (e.g.: 5 GHz) for mesh backhaul, or using both bands for simultaneous client and mesh access.Wireless Backhaul Integration - Roll out Wi-Fi networks rapidly with Cambium’s wireless backhaul powered from the aux PoE Out port on the e700 eliminating the need for a second power line. The aux PoE Out port can also power an 802.3af camera when security monitoring is needed near the hotspotResilience Dual on-board Active/Standby memory banks ensure higher availability. The e700 can store two versions of the software and if needed fall back to a working operational software, reducing the likelihood of site visits and increasing network up-time.
QuSpot for Teltonika RUTX09 Integrated outdoor multi band LTE omni antennas + GPS antenna + place to install Teltonika RUTX09 (All-in-one) QuSpot omni LTE antenna for Teltonika RUTX09 router is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It has embedded GPS antenna. If you use RUTX09 with QuSpot antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support Easy to install Dual SIM – significantly reduce roaming costs
8 x Fast Ethernet porti 1,6 Gbps kommutatsioonivõimsus Edasisaatmiskiirus: (64 baidi suuruste pakettide puhul). Kaitsekindla IP30-klassi metallist lüliti Sisaldab DIN-riba ja seinakinnituse klambreid Lai töötemperatuurivahemik -40° - 75° C (-40° - 167° F) Kaks sisendit tagavad üleliigse voolu kaitsega redundantse toiteallika Häirerelee, mis käivitub voolukatkestuse korral Toiteplokk müüakse eraldi (mudel: TI-M6024) Ventilaatorita disain tagab vaikse töö
QuMAX eXtra Range LTE offers the most powerful directional LTE antenna of all QuWireless antennas. It is dedicated to connections with long distance to base station. It is designed to have Teltonika RUT240/950/955/X09/X11 router installed inside IP67 enclosure. It is the first choice for fixed installations in industrial environment. There is also space for mounting internal genuine Teltonika GPS and Wi-Fi antennas inside the antenna enclosure. NOTE: There is also available version with extreme high gain antenna for high bands (2300-2700 MHz) – QuMax XR LTE High Band.
Set of two separate eXtra Range LTE directional antennas for bi-directional connection to two different LTE base stations. The main antenna has integrated also dualband Wi-Fi GPS Bluetooth antennas and space to install Teltonika RUTX12. The second antenna is only directional LTE XR antenna.The QuMax XR2 a is bi-directional LTE eXtra Range antenna set (two separate antenna) two connect to two different LTE base station (it can also be connected to one base station in order to obtain a greater share of the transfer from that base station). The main antenna additionally has built-in Wi-Fi dual band GPS and Bluetooth antennas 2x Nf connectors for the second LTE antenna and a space to install the RUTX12 router inside antenna enclosure. The second antenna is LTE Extra Range directional antenna only and is in smaller enclosure. The QuMax XR2 set is dedicated to long-range connections from the LTE base station also to two different base stations which gives optimal use of functions such as load balancing and carrier aggregation.
Product kirjeldus: Edimax Pro IEEE 802.3at Gigabit PoE+ Extender - repeater - 10Mb LAN, 100Mb LAN, GigE seadme tüüp: Repeater - RJ-45 / RJ-45 Form Factor: Desktop Cabling Type: 10Base-T, 100Base-TX, 1000Base-T Data Link Protocol: 10Mb LAN, 100Mb LAN, GigE Max Transfer Distance: 100 m Power Over Ethernet (PoE): PoE+ mõõtmed (WxDxH): 7.93 cm x 8.68 cm x 2.58 cm kaal: 200 g
See Delocki USB Type-C™ jadaadapter pakub ühilduvat RS-232 DB9-liidest printeritele, mõõteriistadele, kontrolleritele, IoT-seadmetele jne. Spetsifikatsioon - Ühendused: 1 x USB Type-C™ isane > 1 x jadaühendus RS-232 DB9 isas - Kiibistik: Prolific PL2303 HXD - Kruvitüüp: #4-40 UNC - Ühildub USB 2.0 ja USB 1.1 täiskiirusega 12 Mbit/s. - Andmeedastuskiirus kuni 1 Mbit/s - Signaalid: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND - Pariteet: paariline, paaritu, ei ole, märk, tühik - Stoppbit: 1, 1.5, 2 - Andmabitt: 5, 6, 7, 8 - Voolukontroll: ei ole, Xon / Xoff, RTS / CTS - FIFO: 512 baidi puhver kahesuunaline - Kaabli pikkus: ca. 1,8 m Süsteeminõuded - Android 4.4 või uuem versioon - Linux 2.6.31 või uuem versioon - Mac OS 10.12 või uuem - Windows 7/7-64/8.1/8.1-64/10/10-64/11 - Vaba USB Type-C™ või Thunderbolt™ 3 pordiga arvuti või sülearvuti Pakendi sisu - Adapterkaabel USB Type-C™ > 1 x jada RS-232 DB9 - draiveri CD - Kasutusjuhend
See Delocki tööriistakomplekt sisaldab kõiki tööriistu võrgukaablite paigaldamiseks: kaabli eemaldaja, pressimistööriist, mulgustamistööriist ja võrgukaabli tester. Käepärases kotis on komplekt turvaline kaasaskandmiseks ja kiirelt kasutusvalmis. Spetsifikatsioon • Võrgukaabli tester RJ45 / RJ12 jaoks koos eemaldatava kaugjuhtimisseadmega • Võrgukaabli tester akupesaga 1 x 9 V aku jaoks (ei kuulu komplekti) • Lõikemehhanismiga stantsimistööriist • Kaabli eemaldaja keerdpaar- ja koaksiaalkaablite jaoks • Kaabli eemaldaja reguleeritav erinevate kaabli läbimõõtude jaoks • RJ45 pistikute pressimistööriist • Kott • Koti mõõdud (PxLxK): ca. 21,5 x 13,0 x 5,0 cm
Paigaldamise tüüp35 mm DIN rööbasMaterjalMust ABS + PC plastik, S235JR terasMõõtmed90 x 70 x 25 mmKaasas kruvidPhilipsi paanipea kruvi #6-32×3/16; 2 tk.DIN 7985 M3 x 5 mm; 2 tkKaal68 g
Seda Delocki USB 2.0 kaablit saab ühendada aktiivsesse USB-porti ja see võimaldab pikendada USB-porti kuni 10 m. Ühendades täiendava 10 m pikenduskaabli, saate USB-porti pikendada kuni 20 m kaugusele. Spetsifikatsioon Liitmikud: 1 x USB 2.0 Type-A isane > 1 x USB 2.0 Type-A emane Kiibistik: FE 1.1 Ühendamiseks aktiivse USB-pordi külge Kaabli läbimõõt: 28 AWG andmeliin 22 AWG toiteliin Pikendus kuni 2 x 10 m kaablit Ühendused: kullatud Võimsus: kuni max. 500 mA Kaabli pikkus: ca 10 m Süsteeminõuded Linuxi tuum 3.2 või uuem Mac OS 10.9 või uuem Windows Vista/Vista-64/7/7-64/8.1/8.1-64/10/10-64 Arvuti või sülearvuti, millel on vaba aktiivne USB A-tüüpi port Pakendi sisu USB 2.0 pikenduskaabel 10 m
GrooveA 52 a Our smallest outdoor series model - a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4GHz or 5GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilise the full benefit of 802.11ac high speed wireless. The Groove A (AP model) comes with Level 4 license and includes a Dual Band 2.4/5GHz Omni directional antenna (6dBi 2.4GHz, 8dBi 5GHz), so you can use the unit right out of the box, or use your own antenna. Network Device Type Wireless CPE IEEE 802.11a/b/g, IEEE 802.11n IEEE 802.11ac, Wireless Frequency Range 2.4, 5 GHz Dimensions 77 x 44 x 44 mm
The TEG-MGBS80 Mini-GBIC Single Mode module works with standard Mini-GBIC slots on most switches. This Single Mode LC Type module spans distances up to 80km (49.7miles) and includes 1 x 1000Mbps-LX (LC-Type) Mini-GBIC connector.Kaabeldustehnoloogia1000Mbps-LXMaksimaalne ülekandekaugus80000 mLainepikkus1550 nmVastavus harustandarditeleIEEE 802.3zPistmik(ud)LC
Antud tester võimaldab:Testida patch kaablite PIN korrektsust - 10/100/1000Base-T, 10Base-2 (coax), RJ-11/RJ-12/RJ-45, EIA/TIA-356A/568A/568B ja Token Ring Patchidel Testida USB ja IEEE 1394 kaableid kaasas oleva adapteri abil Sisse ehitatud toon generator, mille abil saab leida õige kaabli kiu standartse Tone Probe abilTestida maandust või kaabli varjestustKontrollida kaablite ühendust, katkestust, lühist ja paaride korrektsustTestida kaableid kuni 300 meetritAuto-Skaneerimine või Manual-Skaneerimise