The DIGITUS® Fast Ethernet PoE switches are designed for medium to large network systems. The PoE function and the 19" size enable an uncomplicated integration into your network. The switches are a great choice to improve the performance and efficiency of your network.Technical Details24-port 10/100Base-TX with PoE support2-port Combo Gigabit TP/SFP UplinkPoE current output 55V DC, max. 30 W per portPoE power supply mode A, PIN 1/2(+), 3/6(-)Supports non-blocking, non-head-of-line forwardingStore and forward technology for optimized data transferAutomatic speed and half/full duplex recognition/adjustmentAuto MDI/MDI-X function16K MAC addressesIntegrated power supply unitPower supply: 390 wattsMaximum PoE output power: 370 wattsEthernet speed: Fast EthernetNumber of ports: 24PoE Power budget: 370 WPoE standard: IEEE802.3at (PoE+)
Build and expand your network with the Ubiquiti® UniFi® Switch XG 6POE, model US-XG-6POE. It is a fully managed, 6-port, 10G switch with 802.3bt PoE++. For deployment versatility, four 10G RJ45 ports offer 802.3bt PoE++ for powering devices, and two SFP+ ports are designed for high‑capacity fiber uplinks.Switching PerformanceThe UniFi Switch XG 6POE offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. The switch features a total non-blocking throughput of up to 60 GbpsModel: US-XG-6POE• (4) 100/1000 Mbps and 2.5/5/10G RJ45 Ports• (2) 1/10 SFP+ Ports• (4) 802.bt PoE++ Ports• Non‑Blocking Throughput: 60 Gbps• Switching Capacity: 120 Gbps• Forwarding Rate: 89.3 Mpps
The Wireless Wire Dish is a ground breaking solution which offers Fiber speed and quality on distances up to 1500 m for a fraction of the price! The RBLHGG-60ad has an extremely capable CPU, making it possible for wire speed throughput in nearly all packet sizes.
The UFiber splitter carries data from a UFiber OLT’s long-haul cable and shares it with multiple UFiber ONUs. Available with 4, 8, 16, or 32 outputs. PLC Splitters UF-SPLITTER-4 UF-SPLITTER-8 UF-SPLITTER-16 UF-SPLITTER-32 Input (1) SC/APC (1) SC/APC (1) SC/APC (1) SC/APC Outputs (4) SC/APC (8) SC/APC (16) SC/APC (32) SC/APC Insertion Loss with Connectors 7.4 dB 10.5 dB 13.7 dB 17.0 dB Uniformity Loss 0.6 dB 0.8 dB 1.2 dB 1.5 dB Polarization Dependent Loss 0.3 dB 0.3 dB 0.3 dB 0.3 dB Wavelength Bandwidth 1260-1650 nm 1260-1650 nm 1260-1650 nm 1260-1650 nm Return Loss (All Ports) 50 dB 50 dB 50 dB 50 dB Directivity 55 dB 55 dB 55 dB 55 dB Fiber Type G657A1 G657A1 G657A1 G657A1 Operating Temperature -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) Total Length 4.06m (13.32') 4.06 m (13.32') 4.06 m (13.32') 4.08 m (13.39') Weight 58 g (2.0 oz) 62 g (2.2 oz) 110 g (3.9 oz) 160 g (5.6 oz)
Tootja: Lanberg Tootegrupp: tööriist/tester tööriista tüüp: Punch down tool Lisaandmed: Lanberg insertion tool for LSA connection also know as punch tool for, Krone IDC 110 Ühendusi ja patch tool is used to crimping/terminating kaabel in, LSA tehnoloogia used to perform the kaabel terminations of flush mounted, ja surface mounted data box, ICT, patch panels ja many other devices dedicated, mainly to telecommunication installation. The device is ideally suited for, LSA sockets in xDSL ja ISDN võrguseade together koos the terminating of kaablid, on the LSA Ühendusi ja block of telephone panels Ühendusi., Due to the fact that a single wire can not be in insulation, the LSA technique, koos stripping of insulation eliminates this problem which translates, to the practical use of this tool. NT-0001 has in itself the spring which ensure, proper vein clamp to the wall socket, hook for pulling veins together with, element to dismantle the terminal block from socket, scissors equipped with, a lock ja the regulator force of impact - sügavus of pressing the veins in, ühenduspesa to cut the excess kaabel. Through Lanberg insertion tool, wiring, will be much lihtner, ja the crimping process significantly will punaneuce, the operating time compared to manual attempts või lihtner applications., In accordance koos EIA/TIA 568 B, Allows to connect a kaabel koos a diameter värv: valge
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 1 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
This outdoor wireless system with a built-in antenna can provide a connection even in the most remote locations. Tiny powerful can be used with any satellite TV dish with an offset mount.LDF LTE6 kit is a device for extremely remote locations that are within cellular network coverage. Attach it to any satellite TV dish (NOT included) and the dish will act as a reflector greatly amplifying the signal.Using large enough dishes it is possible to obtain antenna amplification of 30 dBi or more. That means – Internet connectivity is possible even in areas where you would usually have no mobile connectivity at all. Stormy weather is not a problem either – with a solid IP68 rating LDF LTE6 kit can withstand dust dirt and sand as well as temporary immersion in water.LDF LTE6 kit features a CAT6 LTE modem which enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness and higher efficiency for weaker signal situations in the countryside.Dish is shown for demonstration only and NOT included!
MikroTik is bringing you new powerful products for LoRa® for the fraction of the cost you would expect.R11e-LR8 is a new concentrator Gateway card for LoRa® technology in miniPCI-e form factor based on Semtech SX1301 chipset. It enables LoRa® connectivity for any MikroTik product that has miniPCI-e slot with connected USB lines. With the support of 8 different channels Listen Before Talk (LBT) and spectral scan features this product will astound you with its enticing price point. Operates in 863-870 MHz frequency (used in European Union Russia India etc.)
TwistPortTM Adaptor converts 3rd party radio interface into RF elements® male TwistPortTM interface. The radio installation is seamless and requires no tools. The adaptor makes the 3rd party radios compatible with every TwistPortTM antenna with superior performance noise immunity and network scalability.For Mimosa A5xTwistPortTM Adaptor for A5x is compatible with Mimosa A5x radio with a pair of RP-SMA connectors.Market Leading PerformanceThe frequency band of TwistPortTM Adaptors operation is ultra-wide: 5180 - 6400 MHz. Thanks to the extremely low loss of waveguide the maximum power is delivered from the radio to the antenna.
Outdoor AC/DC power supply units for the MikroTik netPower product line. Built for situations when your outdoor switches need that extra juice.MTP250-53V47-OD can output 53V 250W while the MTP250-26V94-OD works with a 26V 250W output. Both power supplies come in a sturdy IP67 enclosure with extra protection from dust and moisture.The voltage will depend on your setup – take a look at the “DC jack input Voltage” in the Power input specifications of the desired devices. In our example the home access points are designed for 12-30 V power supplies so we are using the MTP250-26V94-OD. If you have a setup demanding higher voltage – like a net of PTZ security cameras you could use the MTP250-53V47-OD instead. Always check the necessary voltage before powering your devices!
The effective connection distance is 100 meters on Cat5e/Cat6 cable. The solution is small but very effective. The DN-95132 is an active indoor PoE midspan injector power supply designed specifically for complex backhaul and networking applications. Provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets. The solution supports both 10/100 Base-T and Gigabit compatible devices. The solution works with devices that support PD PoE with a power of 30 W, such as wireless access points, WLAN routers, network cameras, IP phones, radio devices and other end devices compatible with power over Ethernet. The solution is fully compliant with the PoE IEEE802.3af standard. The device has a plastic housing protected against fire with a protection level of IP40. The solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz. It has a detection chip inside that recognizes and classifies a power-demanding device (PD) before power is supplied to that device. Provides power only when a device supporting the PD (Power Delivery) standard is detected. provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets support for both 10/100 Base-T and Gigabit compatible devices the solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz Easy-to-use combination of power and data cables in one cable Each output port offers output current limit function, short circuit protection, full powered device detection and classification (PD) Injector can be used regardless of the operating system
RUTM08 on tööstuslik juhtmega ruuter, mis on mõeldud usaldusväärsete kaabliühenduste loomiseks paljudes tööstuslikes rakendustes. Marsruuteril on neli Gigabit RJ45 porti, mis võimaldavad kiiret võrgu- ja andmeedastust ühendatud lõpp-punktide vahel. RUTM08 toetab kuni 128 tag/port-põhist VLANi, mis suurendavad võrgu paindlikkust, ning mitut VPN-i ja M2M-sideprotokolli, mis on eriti olulised tööstuskeskkondades.INTERFACES4 x Gigabit RJ45 porti, mis toetavad kuni 128 tag/port-põhist VLANi.VPNToetatud on arvukad VPN-protokollid, sealhulgas Tailscale, OpenVPN, IPsec, ZeroTier jt.M2M PROTOKOLLIDToetatud on mitu tööstusprotokolli, sealhulgas MQTT, Modbus, DNP3, DLMS.RMSKaugjuhtimiseks, juurdepääsuks ja VPN-teenusteksSTANDARDPAKETT*Marsruuter RUTM0818 W TOITEALLIKASEthernet-kaabel (1,5 m)QSG (kiirkäsiraamat)Pakendikarp
The Ubiquiti UCG-Max is designed to provide a robust networking solution with versatile functionality. It operates effectively across a range of temperatures from -10°C to 40°C, ensuring adaptability in diverse environments. The system supports a variety of data link protocols, including Ethernet, Fast Ethernet, Gigabit Ethernet, and 2.5 Gigabit Ethernet, making it suitable for multiple applications.Equipped with a powerful Quad Core ARM Processor running at 1.5 GHz and 3 GB of DDR4 SDRAM, the UCG-Max can handle high traffic with an impressive IDS/IPS throughput of 1 Gbps. The device also emphasizes security and efficiency with cloud management capabilities, a DHCP server, and multiple VPN options such as OpenVPN and L2TP VPN client. With its sleek desktop form factor and various connectivity technologies, this gateway caters to both wired and wireless networking needs, ensuring seamless and secure Internet access.
5GHz, 26", 30dBi dual pol. antenna, need Rocket M5.Carrier Class Performance. Breakthrough Price Points. Instantly pair with Rocket M5 to create powerful 2x2 MIMO PtP Bridging applications. Rocket mount and weatherproof RF jumpers included.Rocket M Seamlessly Integrates with Rocket Dish Antenna. Rocket M and AirMax BaseStation/Rocket Antennas have been designed to seamlessly work together. Installing Rocket M on AirMax BaseStation/Rocket Antennas requires no special tools, you simply snap it into place with the mount provided with the Antennas.
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 48 unshielded RJ-45 ports category 5e. Application of IDC/LSA connectors, provides fast and easy installation. Stiffened shelf with handles allows easy organization of cables and stability of assembly. - 48 unshielded RJ-45 ports category 5e. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 1U. - Shelf with handles for easy installation and organization. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: black RAL9004.
Original part number PP6U-3M/R Product name Gembird UTP Cat6 Patch cord, 3 m, red Producer Gembird Class of product Patchcord network cable Wiring type CAT6 Length 3 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Colour Red
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 48 unshielded RJ-45 ports category 6. Application of IDC/LSA connectors, provides fast and easy installation. Stiffened shelf with handles allows easy organization of cables and stability of assembly. - 48 unshielded RJ-45 ports category 6. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 1U. - Shelf with handles for easy installation and organization. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: grey RAL7035.
