The Sprinter KN-3710 becomes Keenetic's most affordable Internet center with Wi-Fi 6, taking the place one step above the Speedster. It has the same gigabit power for routing, AX1800 wireless, and VPN applications as the Hopper (KN-3810), plus a convenient router/repeater switch. The dual-core EN7561DU 900MHz processor inherits the best features of the proven MT7621, while providing more efficient hardware offloading of Wi-Fi 6 wireless transmission. The MT7905 dual-band Wi-Fi chip does not include a spectrum analyzer and Bluetooth, but is combined with the same high-performance FEM - the MT7975 module and printed 5-dBi antennas, which have proven themselves well. The Sprinter can easily handle the role of a single or main gigabit router serving VPN, Internet filters, traffic prioritization and, for example, a Wi-Fi system with several access points and repeaters. On the other hand, thanks to the mode switch, the Sprinter can be turned into a Wi-Fi 6 repeater with a single movement, which will perfectly fit into a gigabit seamless Wi-Fi system without additional settings. Sprinter Wireless Router, Available bandwidth 1800 Mbps Mesh, 4x10/100/1000M Number of antennas 4, Included Accessories Power adapter, Ethernet cable, Instructions for use Dimensions 214 x 154 x 33 mm
This robust industrial router is equipped with 4 x Gigabit Ethernet ports, Quad-core CPU and 256 MB of RAM. These powerful specifications combined with core RutOS software features such as advanced Firewall and RMS support makes this device a superb Industrial performer where no Cellular or WiFi connectivity is required.ETHERNETWAN1 x WAN (can be configured to LAN) 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverLAN3 x LAN ports, 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverNETWORKRoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)Network protocolsTCP, UDP, IPv4, IPv6, ICMP, UDP, NTP, DNS, HTTP, FTP, SMTP, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPPVoIP passthrough supportH.232 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsConnection monitoringPing Reboot, Periodic Reboot, LCP and ICMP for link inspectionFirewallPort forward, traffic rules, custom rulesDHCPStatic and dynamic IP allocation, DHCP RelaydQoSTraffic priority queuing by source/destination, service, protocol or port, WMM, 802.11eDDNSSupported >25 service providers, others can be configured manuallyNetwork backupVRRPSSHFS (optional)Possibility to mount remote file system via SSH protocol (not available in standard FW)MONITORING & MANAGEMENTWEB UIHTTP, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel logFOTAFirmware update from server, automatic notification.SSHSSH (v1, v2)TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystemsSNMPSNMP (v1, v2, v3), SNMP trapJSON-RPCManagement API over HTTPMODBUSMODBUS TCP status/controlRMSTeltonika Remote Management System (RMS)SYSTEM CHARACTERISTICSCPUQuad-core ARM Cortex A7, 717MHzRAM256MB, DDR2FLASH memory256MB SPI FlashFIRMWARE / CONFIGURATIONWEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backupFOTAUpdate FW/configuration from serverRMSUpdate FW/configuration for multiple devicesKeep settingsUpdate FW without losing current configurationFIRMWARE CUSTOMIZATIONOperating systemRutOS (OpenWrt based Linux OS)Supported languagesBusybox shell, Lua, C, C++Development toolsSDK package with built environment providedINPUT/OUTPUTInput1 x Digital Input (Non-isolated, Logic low 0...+5V, Logic high +8...+40V)Output1 x Digital Output (open collector type, 30V@0.3A)EventsEMAIL, RMSUSBData rateUSB 2.0ApplicationsSamba share, custom scriptsExternal devicesPossibility to connect external HDD, flash drive, additional modem, printerStorage formatsFAT, FAT32, NTFSPOWERConnector4 pin industrial DC power socketInput voltage range9 - 50 VDC, reverse polarity protection, voltage surge/transient protectionPoE (passive)Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standardsPower consumption11W Max.PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS)Ethernet4 x RJ45 ports, 10/100/1000 MbpsStatus LEDs3 x connection status LEDs, 5x connection strength LEDs, 8x LAN status LEDs, 3x WAN status LEDs, 1x Power LEDPower4 pin industrial DC power socketUSBUSB A socket for external devicesResetReset/restore to default buttonPHYSICAL SPECIFICATIONCasing materialFull aluminium housingDimensions115 mm x 95 mm x 32 mm (H x W x D)Weight357 gMounting optionsDIN rail (can be mounted on two sides), flat surface placementOPERATING ENVIRONMENTOperating temperature-40 C to 75 COperating humidity10% to 90% non-condensingIngress Protection RatingIP30
MikroTik Cloud Router Switch CSS610-8P-2S+IN No Wi-Fi, Router Switch, Rack Mountable, 10/100/1000 Mbit/s, Ethernet LAN (RJ-45) ports 8, Mesh Support No, MU-MiMO No, No mobile broadband, SFP+ ports quantity 2
AX3000 Ceiling Mount WiFi 6 Access Point - Ultra-Fast WiFi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 2402 Mbps on 5 GHz totals 2976 Mbps WiFi speeds. - High-Efficiency WiFi 6: More connected devices can enjoy faster speeds. - Centralized Cloud Management: Omada SDN integration manages the whole network locally or from the cloud via web UI or Omada app. - 160 MHz Channel: Double the data at peak transmission times on a single stream with HE160. - Seamless Roaming: Video streams and voice calls are unaffected as users move between locations. - Omada Mesh: Enables wireless connectivity between access points for extended range and flexible deployment. - PoE+ Powered: Supports both 802.3at PoE+ and DC (DC adapter sold separately) power supply for flexible installations. - Ultra-Slim Design: Φ160 mm × 33.6 mm elegant design brings more agility. EAP653 Type Wireless Access Point, Data transmission speed 2976 Mbps IEEE 802.11a/b/g, IEEE 802.11n IEEE 802.11ac, IEEE 802.11ax WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access WPA3, 802.1X (EAP-MD5, EAP-TLS, EAP-TTLS and EAP-PEAP) Antenna Type Built-in, Wireless Frequency Range 2.4GHz/5GHz Dimensions 160 × 160 × 33.6 mm
Xiaomi Mesh System | AC1200 EU (2-pack) | 802.11ac | 867 Mbit/s | 10/100/1000 Mbit/s | Ethernet LAN (RJ-45) ports 2 | Mesh Support Yes | MU-MiMO No | No mobile broadband | Antenna type Internal
The ultimate heavy-duty home lab router with USB 3.0 1G and 2.5G Ethernet and a 10G SFP+ cage. Also available is the K-79 kit with that you can mount four of these new routers in a single 1U rackmount space! Unprecedented processing power in such a small form factor.The board features 9 wired ports and a full-sized USB 3.0. Seven of the ports are Gigabit Ethernet another one is 2.5 Gigabit Ethernet and the last one is a 10G SFP+ cage. All the ports are connected to a powerful Marvell Amethyst family switch-chip with a 10 Gbps full-duplex line leading to the Marvell Armada Quad-core ARMv8 1.4 GHz CPU. Both CPU and the switch-chip are located on the bottom of the board – so the case acts as a massive heat-sink!RB5009UG+S+IN can be powered in 3 different ways: PoE-in from Ethernet port #1 or DC Jack or 2-pin terminal on the side.Boards come with 1GB of DDR4 RAM and 1GB NAND storage. This combination of ports and components compared to our other products in a similar form factor provides almost double the performance in configurations with heavy CPU loads.With a simple set of mounting accessories you can mount FOUR of these routers in a single 1U rackmount space! No more server-room-Tetris just pure productivity.
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
2.4GHz, 29.4x8x3cm, 11dBi antenna, AirOS, POE-RJ-45 Connector, Standard 802.11n.50+ Mbps real outdoor throughput and up to 15km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.New antenna array designs featuring 11dBi dual-polarity gain at 2.4GHz, with optimized cross-polarity isolation and in a compact form-factor.The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.
Tüüp: Muu; Side tüüp: 10 / 100 / 1000 Mbps; Printserver: Ei; SIM-kaardi pesa olemasolu: Ei; Liides LAN (RJ-45): On; USB 2.0 liides: Ei; WAN-port liides: Ei; Portide arv: LAN x 2; Värv: Must; Mõõtmed (kõrgus х laius х sügavus): 36,8 x 125 x 59,4 mm;...
24 10/100/1000Mbps portsInnovative energy-efficient technology saves power up to 20%Supports MAC address self-learning, Auto MDI/MDIX and Auto negotiationPlug & play designThe TL-SG1024D 24-Port Gigabit switch provides an easy way to make the transition to Gigabit Ethernet. All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SG1024D can save up to 20%* of the power consumption, making it an eco-friendly solution for your business network.
The ceiling AP on steroids! Mikrotik bestseller cAP is back – juiced up and stronger than ever. Compared to the previous cAP models the improved high-gain antenna increases the covered area by up to 100%!Need a nice-looking access point that won’t get in your way? Or perhaps you’re managing the network in a crowded place and don’t want everyone to have physical access to the device? Either way – ceiling is the answer! The device itself is pretty sleek - the low profile attracts less attention than a smoke detector. Your clients guests or colleagues won’t even notice it. But they will definitely notice the blazing fast wireless connection all across the premises.The new design features a larger high-gain antenna higher sensitivity and a built-in reflector. These improvements allow increasing the covered area by up to 100% compared to the previous cAP models!The dual-band dual-chain 2.4 and 5 GHz wireless radio provides a strong coverage in 360 degrees around it so you don’t have to worry about the placement of the device so much. Putting it on the ceiling eliminates many signal absorption problems such as the signal being blocked by large TV sets metal cubicle walls in open space offices etc.Even though the radio supports repeater mode the two Gigabit Ethernet ports give you the ability to extend your network with cables even if PoE power is required: the cAP XL ac supports 802.3af/at PoE input on the first port and passive PoE output (up to 57V) on the second port.
SpecificationsOutput Voltage 48 VOutput Rating 0.5A (24W)Input Voltage AC 100~240VInput Frequency 50~60HzOperating Temperature 0C~+40CStorage Temperature -20C~+85C
The USW-Lite-8-PoE is a fully managed Layer 2 switch with eight Gigabit Ethernet ports for your RJ45 Ethernet devices. Four ports also offer auto-sensing 802.3at PoE+ that provide up to a total PoE wattage of 52W for UniFi Access Points or other PoE devices.Managed and configured by the UniFi Network Controller with UniFi mobile app support the USW-Lite-8-PoE offers Layer 2 switching protocols and features. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere.
Omada AC1200 Wireless MU-MIMO Gigabit Wall Plate Access Point - Fast Dual-Band Wi-Fi: Simultaneous 300 Mbps on 2.4 GHz and 867 Mbps on 5 GHz totals 1,167 Mbps Wi-Fi speeds with MU-MIMO.† - Four Gigabit Ports: 4 Gigabit Ethernet ports (1× uplink + 3× downlink), with one downlink port supporting PoE pass-through to provide power for wired device. - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP), Centralized Cloud Management, and Intelligent Monitoring. - Centralized Management: Cloud access and Omada app for ultra convenience and easy management. - Elegant Appearance: Ultra slimmest and conspicuous design blends into hotel rooms, hospitals, offices, dormitories and any other environments. - Easy Installation and PoE Support: Easy-mount construction, compatible with 86 mm & EU & US standard junction box, and 802.3af/at PoE support. - Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies. - Advanced Wireless Tech: Optimize network performance with MU-MIMO, Band Steering, and Beamforming technologies. EAP235-Wall Type Wireless Access Point, Data transmission speed 1200 Mbps IEEE 802.11a, IEEE 802.11 b/g IEEE 802.11n, IEEE 802.11ac Power supply requirements 802.3af/802.3at PoE, Colour White Dimensions 143 × 86 × 20 mm
Dream Machine Special Edition All-in-one router and security gateway with an integrated PoE switch and network video recorder. The Dream Machine Special Edition (UDM SE) is an enterprise-grade UniFi OS Console capable of helping home and business owners alike seamlessly scale and manage their networks with high-speed, dual-WAN connectivity (10G SFP+ and 2.5GbE RJ45 ports), a Gigabit, PoE switch, and a network video recorder (NVR) with 128 GB of internal storage. Powered by UniFi OS, the UDM SE gives you full control of all your UniFi devices, including access points, Protect cameras, Talk phones, and Access readers. It's also a future-proof console since it will be able to run all upcoming UniFi OS applications. Engineered for end-to-end simplicity, the UDM SE features an integrated Bluetooth radio that streamlines the initial setup and configuration process, which can be completed in minutes with the UniFI Network application (web or mobile).
