Intelligent 1000Base-T to 1000Base-LX Single-Mode SC Fiber Converter (50km/31miles) TFC-1000S50 (Version C1.0R) SC-type single-mode fiber port connects over distances of up to 50km (31 miles) 1000Base-T Gigabit copper port supports Full-Duplex mode Supports port level SNMP management Functions as a stand alone converter or with the TFC-1600 fiber chassis The TFC-1000S50 Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP and spans distances up to 50km (31miles). Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC-Type) port. Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards 1 x 1000Base-T RJ-45 port 1 x 1000Base-LX single-mode SC type fiber port Provides Dip switch to set: Fiber (Forced/Auto-Negotiation), LLR (Enable/Disable) Support LLCF (Link Loss Carry Forward, Link Pass Through) Support LLR (link Loss Return) for Fiber port Monitor and configure Ethernet or Fiber’s duplex mode, LLR, port on/off and receive link down information via management module TFC-1600MM and chassis TFC-1600 Status LED indicators for Power and Link/Activity Wall mountable Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters 3-year limited warranty
The TFC-1000S70 Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP and spans distances up to 70km (43.5 miles). Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC-Type) port.Andmeedastuskiirus (maksimaalne)1000 Mbit/sKaabeldustehnoloogia1000Base-T, 1000Base-LXLainepikkus1300 nmLED-indikaatoridVõimsusVõimsustarve (tüüpiline)7,2 WKasutamistemperatuur (T-T)0 - 40 °CHoiustamistemperatuur (T-T)-25 - 70 °CSuhteline õhuniiskus kasutamisel (H-H)10 - 90 protsentiSuhteline õhuniiskus (H-H) hoiustamisel5 - 90 protsentiAndmelüli protokollidCSMA/CDPistmik(ud)SC
The LINDY USB to ExpressCard adapter allows you to use ExpressCards with your USB enabled computer. Perfect for desktop computers or older laptops.Supports USB 2.0 based ExpressCard/34 & /54 cards only (PCI Express based cards are not supported) Compatible with USB 2.0 specifications Supports data rates up to 480 Mbps Plug and Play installation, no driver required PC and Mac Compatible
D-SUB kestad on loodud D-SUB pistikute kaitseks ja pingevähenduseks. Neil on 9-positsiooniline disain, plastkorpus metallkattega vastupidavuse tagamiseks ning sirge kaabli sisseviik lihtsaks kaabli sisestamiseks. Kruvi võimaldab turvalist ja reguleeritavat kaabli kinnitust.Põhikirjeldus:Tüüp: D-SUB katePositsioonid: 9Materjal: Plastik, metallkattegaKaabli sisseviik: SirgeKinnituse mehhanism: KruviKeerme tüüp: UNC 4-40Need D-SUB korgid sobivad ideaalselt rakendustele, mis vajavad kaitset ja pingevähendust D-SUB pistikute jaoks erinevates elektroonilistes ja tööstuslikes keskkondades.
Wireless 802.11n (150) High-Gain UsB adapter, USB 2.0, Data rate up to 150Mbps. Compatible with 802.11g and 802.11b, WEP, WPA, WPA2 encryption and WPS (Wi-Fi Protected Setup), 3dbi High-Gain rotatable Antenna: 90 degree of vertical angle and 180 degree of horizontal
Complies with the IEEE 802.3 , IEEE 802.3u and IEEE 802.3ab standards.Smart Green Ethernet technology to reduce power consumption 30%~50%.Supports Auto-MDI/MDI-X, full/half duplex modes and auto-negotiation.Supports flow control , Non-blocking and Jumbo Frame.
Features Performance Category 7Cable Style Simplex Cable Type Twisted PairbProduct Classification Cable - ISO/IEC Category Product Type Cable Shielded Yes Wire/Cable Type Twisted Pair Usage Conditions Installation Temperature Range 0 – 50 °COperating Temperature Range -20 – 60 °C
Võrgukaabel CAT6, U/UTP, hall CCA material unshielded LAN/network cable to connect network components with 2 x RJ45 connectors with gold plated PINs with length indication on the slimline strain relief with latch protection pair-sequence acc. to EIA/TIA 568B suitable for Gigabit (10/100/1000 Mbit) network
USB keyboard and mouse support enables users to choose the most suitable keyboard style Control Sun, Mac or PC computers from a common KVM console Intelligent cables connect to USB, Sun(8-pin), PS/2 and AT/RS232 style computer ports Two simultaneous users may access computers independently Advanced on-screen display makes set-up and control easy Compatible with all major software including Windows 3.X, NT, 2000, 95, 98, XP, ME, DOS, Linux, Mac OS, Sun OS, Unix and NetWare High (1900x1440) video quality with DDC support Rack mountable in a standard 19 inch rack
Built in KVM over CATx extender transmitters to control switch up to 200m away Optional redundant power supply Advanced On Screen Display - up to 16 different passwords and user profiles can be stored on the SmartView XPro Flash upgradeable firmware - as new drivers are released, free upgrades can be downloaded from the Adder website. Front panel keys - used for selecting users and channels manually. Also used for selecting auto-scan. Front panel display - 7 Segment display (red) shows the currently selected CPU. 7 Segment display (green) shows the currently selected user. Indicators show keyboard and mouse activity. Selection methods - convenient switching using On Screen Display menu, selectable keyboard hot-key, 3 button mouse, front panel key or RS232 serial control. Hot connection of devices - can be connected to many running PCs without reboot by using the keyboard and mouse reset feature. On the fly configuration - the SmartView XPro can be configured using the OSD menu. User definable hot-key commands can be used for quick channel selection. Expandable - where the size of your installation is beyond the scope of a single SmartView XPro, additional units can be cascaded. This will allow you to use multiple units to provide a video-switching network. Auto-scan - the SmartView XPro can be set to automatically scan all ports or all active ports at a user definable rate. Automatic mouse conversion - PS/2, IntelliMouse and RS232 type mice are all supported between switch and CPUs. Controlling mouse/trackball is PS/2 type. Mouse control of OSD menu. Name search facility in OSD menu. Users may select exclusive or shared computer access. Keyboard and mouse reset features for each user port. Optional CPU reminder banner may be transparent and moved around the screen. Upload and download of OSD configurations to a PC file or Excel spreadsheet. Cascaded units do not need to be configured.
Adder manufactures a remote control module which replicates the keyswitch and display on most of our KVM switch range. With the remote control module you can select an alternative CPU by pressing the button and see which CPU is currently selected on the display. The module is small and compact so it can easily be attached to your keyboard or the front of your monitor, or any other location required. Various cable lengths are available but please contact our sales desk if you require any other length. SPECIFICATION: RC1, 3m (9ft) remote control module RC1-10m, 10m (30ft) remote control module RC1-20m, 20m (60ft) remote control module RC1-30m, 30m (90ft) remote control module Adder products which currently support the RC1 are: AdderView 4OSD AdderView 8OSD AdderView USB (both variants) SmartView 4 SmartView 4PRO SmartView 8PRO SmartView 12PRO SmartView 16PRO
Adder manufactures a remote control module which replicates the keyswitch and display on most of our KVM switch range. With the remote control module you can select an alternative CPU by pressing the button and see which CPU is currently selected on the display. The module is small and compact so it can easily be attached to your keyboard or the front of your monitor, or any other location required. Various cable lengths are available but please contact our sales desk if you require any other length. SPECIFICATION: RC1, 3m (9ft) remote control module RC1-10m, 10m (30ft) remote control module RC1-20m, 20m (60ft) remote control module RC1-30m, 30m (90ft) remote control module Adder products which currently support the RC1 are: AdderView 4OSD AdderView 8OSD AdderView USB (both variants) SmartView 4 SmartView 4PRO SmartView 8PRO SmartView 12PRO SmartView 16PRO
Two Keyboard Video monitor and Mouse ports allow simultaneous access. A choice of 8 and 16 port models are available all of which can be desk or rack mounted. Matrix firmware can be Flash upgraded. Cascade Matrix to support up to 500 PCs from one OSD database. Exceptionally high video quality with screen resolution up to 1900 x 1440. DDC compliant monitor ports. Standard PC99 specification colour coded connectors reduce cabling costs. Mixed PS/2, wheel mice and AT/ RS232 keyboards and mice supported. Channel selection via On Screen Display menu, front panel, mouse, user selectable hot-key combinations or RS232 control. OSD menu supports up to 16 different user access profiles. Compatible with all major software including DOS, Windows 3.x/95/98/NT/2000/ME/XP, Linux, Unix and NetWare.
Exact pixel to pixel digital video transfer Supports maximum DVI bandwidth and 1600x1200 pixels per DVI link Multiple DVI links may be fed to a single monitor to support resolutions up to 3200 x 2400 x 60 Hz Supports all common operating systems Channel selection via hot keys, mouse, front panel key, RS232 or optional remote control Flash upgradeability ensures future upgrade path May be synchronised with other Adder analogue, DVI and Multiscreen products for advanced switching requirements 2 and 4 port models with 2 or 4 video heads available
Exact pixel to pixel digital video transfer Supports maximum DVI bandwidth and 1600x1200 pixels per DVI link Multiple DVI links may be fed to a single monitor to support resolutions up to 3200 x 2400 x 60 Hz Supports all common operating systems Channel selection via hot keys, mouse, front panel key, RS232 or optional remote control Flash upgradeability ensures future upgrade path May be synchronised with other Adder analogue, DVI and Multiscreen products for advanced switching requirements 2 and 4 port models with 2 or 4 video heads available
Exact pixel to pixel digital video transfer Supports maximum DVI bandwidth and 1600x1200 pixels per DVI link Multiple DVI links may be fed to a single monitor to support resolutions up to 3200 x 2400 x 60 Hz Supports all common operating systems Channel selection via hot keys, mouse, front panel key, RS232 or optional remote control Flash upgradeability ensures future upgrade path May be synchronised with other Adder analogue, DVI and Multiscreen products for advanced switching requirements 2 and 4 port models with 2 or 4 video heads available
Control several multi-video enabled PCs from a single keyboard, mouse and bank of video monitors. High quality video with DDC support and resolutions up to 1920 by 1440 pixels. Dual and quad video head models available with two and four computer ports. Computer selection via keyboard hotkeys, mouse, front panel key, RS232 or remote controller. SmartBoot enables simultaneous bootup of all computers. Software independent operation ensures very wide compatibility. Reliably draws power from the attached PCs avoiding the need for an extra power supply. Flash upgradeable for future device support and enhancements. Excellent for banking, security and engineering applications. Cascadeable to support more than four computers. Hardware compatible with desktop and laptop PCs, RS6000, SGI and DEC Alphas. May be linked together to synchronously switch up to sixteen monitors.
Control several multi-video enabled PCs from a single keyboard, mouse and bank of video monitors. High quality video with DDC support and resolutions up to 1920 by 1440 pixels. Dual and quad video head models available with two and four computer ports. Computer selection via keyboard hotkeys, mouse, front panel key, RS232 or remote controller. SmartBoot enables simultaneous bootup of all computers. Software independent operation ensures very wide compatibility. Reliably draws power from the attached PCs avoiding the need for an extra power supply. Flash upgradeable for future device support and enhancements. Excellent for banking, security and engineering applications. Cascadeable to support more than four computers. Hardware compatible with desktop and laptop PCs, RS6000, SGI and DEC Alphas. May be linked together to synchronously switch up to sixteen monitors.
Exceptionally high video performance to local, remote and global users True multi-platform support Flash upgradeable CAMs available for PS/2, USB and Legacy Sun keyboard and mouse support with optional audio Country code reporting DDC and keyboard and mouse emulation PS/2 or USB keyboard and mouse control Expand using CATx cascade connections with simple user intuitive set up Optional CD quality audio when using correct Computer Interface Module (CAM) Power control functions supported via dedicated serial port Enterprise grade security (using AES 128 bit encryption and RSA 2048 bit public key authentication) Global users (IP) can chose between HTTP or RealVNC for highly secure connections and high performance.
Control several multi-video enabled PCs from a single keyboard, mouse and bank of video monitors. High quality video with DDC support and resolutions up to 1920 by 1440 pixels. Dual and quad video head models available with two and four computer ports. Computer selection via keyboard hotkeys, mouse, front panel key, RS232 or remote controller. SmartBoot enables simultaneous bootup of all computers. Software independent operation ensures very wide compatibility. Reliably draws power from the attached PCs avoiding the need for an extra power supply. Flash upgradeable for future device support and enhancements. Excellent for banking, security and engineering applications. Cascadeable to support more than four computers. Hardware compatible with desktop and laptop PCs, RS6000, SGI and DEC Alphas. May be linked together to synchronously switch up to sixteen monitors.
Exact pixel to pixel digital video transfer Supports maximum DVI bandwidth and 1600x1200 pixels per DVI link Multiple DVI links may be fed to a single monitor to support resolutions up to 3200 x 2400 x 60 Hz Supports all common operating systems Channel selection via hot keys, mouse, front panel key, RS232 or optional remote control Flash upgradeability ensures future upgrade path May be synchronised with other Adder analogue, DVI and Multiscreen products for advanced switching requirements 2 and 4 port models with 2 or 4 video heads available
Control several multi-video enabled PCs from a single keyboard, mouse and bank of video monitors. High quality video with DDC support and resolutions up to 1920 by 1440 pixels. Dual and quad video head models available with two and four computer ports. Computer selection via keyboard hotkeys, mouse, front panel key, RS232 or remote controller. SmartBoot enables simultaneous bootup of all computers. Software independent operation ensures very wide compatibility. Reliably draws power from the attached PCs avoiding the need for an extra power supply. Flash upgradeable for future device support and enhancements. Excellent for banking, security and engineering applications. Cascadeable to support more than four computers. Hardware compatible with desktop and laptop PCs, RS6000, SGI and DEC Alphas. May be linked together to synchronously switch up to sixteen monitors.
A choice of 4 and 8 port models Self powered operation simplifies installation Mixed PS/2 and AT/ RS232 keyboards and mice supported Easy channel switching from On Screen Display menu, front panel, mouse, optional remote control, RS232 serial or keyboard hot-key Can be used as a rack mount or desktop switch Cascadable to support up to 300 PCs High video quality and screen resolution up to 1900 x 1440 Compatible with all major software including DOS, Windows 3.x/95/98/NT/2000, Linux, Unix and Netware All metal construction KVM switch designed and manufactured in the UK
A choice of 4 and 8 port models Self powered operation simplifies installation Mixed PS/2 and AT/ RS232 keyboards and mice supported Easy channel switching from On Screen Display menu, front panel, mouse, optional remote control, RS232 serial or keyboard hot-key Can be used as a rack mount or desktop switch Cascadable to support up to 300 PCs High video quality and screen resolution up to 1900 x 1440 Compatible with all major software including DOS, Windows 3.x/95/98/NT/2000, Linux, Unix and Netware All metal construction KVM switch designed and manufactured in the UK
Built in KVM over CATx extender transmitters to control switch up to 200m away Optional redundant power supply Advanced On Screen Display - up to 16 different passwords and user profiles can be stored on the SmartView XPro Flash upgradeable firmware - as new drivers are released, free upgrades can be downloaded from the Adder website. Front panel keys - used for selecting users and channels manually. Also used for selecting auto-scan. Front panel display - 7 Segment display (red) shows the currently selected CPU. 7 Segment display (green) shows the currently selected user. Indicators show keyboard and mouse activity. Selection methods - convenient switching using On Screen Display menu, selectable keyboard hot-key, 3 button mouse, front panel key or RS232 serial control. Hot connection of devices - can be connected to many running PCs without reboot by using the keyboard and mouse reset feature. On the fly configuration - the SmartView XPro can be configured using the OSD menu. User definable hot-key commands can be used for quick channel selection. Expandable - where the size of your installation is beyond the scope of a single SmartView XPro, additional units can be cascaded. This will allow you to use multiple units to provide a video-switching network. Auto-scan - the SmartView XPro can be set to automatically scan all ports or all active ports at a user definable rate. Automatic mouse conversion - PS/2, IntelliMouse and RS232 type mice are all supported between switch and CPUs. Controlling mouse/trackball is PS/2 type. Mouse control of OSD menu. Name search facility in OSD menu. Users may select exclusive or shared computer access. Keyboard and mouse reset features for each user port. Optional CPU reminder banner may be transparent and moved around the screen. Upload and download of OSD configurations to a PC file or Excel spreadsheet. Cascaded units do not need to be configured.
High Definition VGA with extended profile DDC EDID The AdderView Pro Multi Screen features high resolution VGA video with extended profile DDC EDID. The extended DDC EDID profile ensures that the switched graphics card is always optimised to work with your screen. The VGA capabilities enable users to work at very high resolutions including WUXGA (1920 x 1200) or (1920 x 1440) on each head for resolution intensive applications such as media/graphic design or detailed medical imaging. True Emulation USB2.0 technology The AV4PRO-VGA-MS belongs to the first KVMA range of switches to feature Adder's advanced True USB Emulation technology. Emulated USB provides an instantaneous and reliable switching action and makes keyboard hotkey and mouse switching possible. Previous implementations have used generic emulations and consequently have only been able to support the most basic keyboard and mouse features. Adder's revolutionary True Emulation technology overcomes this frustrating limitation by emulating the true character of the connected devices to all the computers simultaneously. This means that you can now use the extra function keys, wheels, buttons and controls that are commonly found on modern keyboards and mice. With the AV4PRO-VGA-MS, a whole new group of users can take advantage of the flexibility KVM switches have to offer. Users in Architecture, Graphic Design, Post Production, Animation, Medical Imaging etc. often need to use specialised interface devices such as graphics tablets, 3D explorers, joysticks, and so on. The AV4PRO-VGA-MS makes all this possible. Independent simultaneous device selection Flexibility is key to the AdderView Pro. The switch enables you to use the KVMA console to work on one computer whilst your USB peripherals are connected to other computers and your speakers are playing music from yet another. You can of course still switch all connected devices to any one of the connected computers as with any other KVM switch. Channel selection options The AdderView Pro can be switched using s
Two Keyboard Video monitor and Mouse ports allow simultaneous access. A choice of 8 and 16 port models are available all of which can be desk or rack mounted. Matrix firmware can be Flash upgraded. Cascade Matrix to support up to 500 PCs from one OSD database. Exceptionally high video quality with screen resolution up to 1900 x 1440. DDC compliant monitor ports. Standard PC99 specification colour coded connectors reduce cabling costs. Mixed PS/2, wheel mice and AT/ RS232 keyboards and mice supported. Channel selection via On Screen Display menu, front panel, mouse, user selectable hot-key combinations or RS232 control. OSD menu supports up to 16 different user access profiles. Compatible with all major software including DOS, Windows 3.x/95/98/NT/2000/ME/XP, Linux, Unix and NetWare.
USB keyboard and mouse support enables users to choose the most suitable keyboard style Control Sun, Mac or PC computers from a common KVM console Intelligent cables connect to USB, Sun(8-pin), PS/2 and AT/RS232 style computer ports Two simultaneous users may access computers independently Advanced on-screen display makes set-up and control easy Compatible with all major software including Windows 3.X, NT, 2000, 95, 98, XP, ME, DOS, Linux, Mac OS, Sun OS, Unix and NetWare High (1900x1440) video quality with DDC support Rack mountable in a standard 19 inch rack
1 x 100Base-FX SC-type Multi-Mode fiber port PCI 2.2 specification compliant Incorporates Advanced Configuration Power Management Interface (ACPI 1.0) Supports PC99, PC2001 and Net PC hardware system designer guide. Separates 2Kbyte FIFO for receiver and transmitter controllers Supports 802.3x Full-Duplex flow control and multiple pause frame Supports IEEE 802.1Q VLAN tagging Supports Windows 7/Vista/XP/2000/ME/98SE, linux and more operating systems Intuitive diagnostic utility for windows 98SE/ME/2000/2003 Server *
The HP 2530 Switch Series consists of four fully managed Layer 2 edge switches, delivering cost-effective, reliable, and secure connectivity for business networks. Designed for entry-level to midsize enterprise networks, these Gigabit Ethernet switches deliver full Layer 2 capabilities with enhanced access security, traffic prioritization, IPv6 host support, and optional PoE+, and include a product lifetime warranty.
