See Delocki DisplayPort switch on käsitsi juhitav kahesuunaline lüliti erinevate seadmete ühendamiseks DisplayPort pordiga. See lüliti pakub kahte erinevat rakendust. 1. Kuni 2 seadet saab ühendada monitori, teleri või projektoriga. Nupulevajutusega saab valida seadme, mida ekraanil kuvatakse. 2. DisplayPort-seadet saab ühendada kuni 2 ekraaniga. Nupuvajutusega saab valida ekraani, millel signaali kuvatakse. Samaaegne väljund mitmele ekraanile ei ole võimalik. Märkus Kasutades videoallikas 20-poldilist Displayport-kaablit, saab lüliti toiteallikale anda. Spetsifikatsioon - Ühendused: Funktsioon 1 Sisend: DisplayPort 20-poolne emane 1 x 5 V DC pesa 1,35 x 3,5 mm Väljund: 1 x DisplayPort 20-poolne pistikupesa: 1 x DisplayPort 20-poolne pistikupesa Funktsioon 2 Sisend: 1 x DisplayPort 20-poolne pistikupesa: 1 x DisplayPort 20-poolne pistikupesa 1 x 5 V alalisvoolu pesa 1,35 x 3,5 mm Väljund: 2 x DisplayPort 20-poolne pistikupesa: 2 x DisplayPort 20-poolne pistikupesa - DisplayPort pordi valik nupu abil - Resolutsioon kuni 3840 x 2160 @ 60 Hz (sõltuvalt süsteemist ja ühendatud seadmest). riistvarast) - Plastikust korpus - Värv: must - Mõõtmed (LxSxK): ca. 82 x 62 x 17 mm Süsteeminõuded - Vaba DisplayPort-liitmik - DisplayPort kaabel - Toiteallikas, millel on vaba USB A-tüüpi port Pakendi sisu - Kahesuunaline switch - USB toitekaabel, pikkus: ca 1 m - Kasutusjuhend
Delocki audiomuundur teisendab digitaalse audiosignaali analoogseks stereosignaaliks. Näiteks DVD- või Blu-ray-mängija saab ühendada seadme sisendisse ja signaali saab edastada optilise TOSLINK või S/PDIF koaksiaalühenduse kaudu. Väljundipordis edastatakse audiosignaal RCA-liidese kaudu. Spetsifikatsioon - Ühendused: Sisend: S/PDIF: 1 x TOSLINK emane S/PDIF 1 x koaksiaalühendus S/PDIF (emane): 1 x koaksiaalühendus S/PDIF 1 x USB Type Micro-B female (5 V toide): 1 x USB Type Micro-B female (5 V toide) Väljund: 2 x RCA female - Kiibistik: MS8416 - Toetatud proovivõtusagedused: 32 / 44.1 / 48 / 96 / 192 kHz - Bitikiirus 16 - 24 bitti - Plastikust korpus - Värv: must - Mõõtmed (LxSxK): ca. 63 x 44 x 23 mm Süsteeminõuded - Digitaalne helisignaal - Toiteallikas, millel on vaba USB Type-A emasport Pakendi sisu - muundur digitaalne > analoog - USB Type-A ja Micro-B tüüpi kaabel, pikkus ca. 30 cm - Kasutusjuhend
Wireless Router, Available bandwidth 1200 Mbps, IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, 1 WAN, 4x10/100M, 64, 128-bit WEP, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, DHCP, Number of antennas 4, Wireless Frequency Range 2.4GHz and 5GHz, Windows 10, Windows 8, Windows 7, Linux, MacOS, Windows XP, Windows Vista, Power supply requirements 9VDC / 0.85A, Dimensions 229.87 x 144.19 x 36.85 mm
The USW-48-PoE is a configurable Gigabit Layer 2 switch with 48 Gigabit Ethernet ports including 32 auto-sensing 802.3at PoE+ ports and 4 SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. The USW-48-PoE features a 1.3" touch LCM to provide statusManaged and configured by the UniFi Network Controller with UniFi mobile app support the USW-48-PoE offers an extensive suite of advanced Layer 2 switching protocols and features including operation mode (switching mirroring or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere.
netFiber 9 is a powerful outdoor switch with SFP SFP+ and Gigabit Ethernet. It features a powerful ARM v7 CPU 256 MB of RAM 4x 10G SFP+ ports and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in so you don’t have to rely on the DC jack for powering in tight hard-to-reach spots. There is a console port followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why Mikrotik designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet.There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws so you can attach the netFiber to a pole wall or mast right away.netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports a powerful CPU and a rugged case netFiber 9 is a real bargain that will make your network management so much easier!
A pair of industrial temperature grade (-40°C to +85°C) modules for 80km links, includes one S-45LC80D and one S-54LC80D. SFP module S-45LC80D: 1.25G, SM, 80km, T1490nm/R1550nm, LC-connector, DDM. SFP module S-54LC80D: 1.25G, SM, 80km, T1550nm/R1490nm, LC-connector, DDM. Compatible with all MikroTik products, that have SFP or SFP+ cages.
Tootja: Gembird Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 (8P8C) Wiring type: CAT5E Lisaandmed: 30" gold plated, 3-fork internal contacts for use koos solid LAN kaablid, bag of 10tk värv: Transparency
Tootja: Lanberg Tootegrupp: Socket component Type of plug's component: moodul adapter Type of ühenduspesa: 1 x RJ45 Lisaandmed: ühenduspesa:, external värv: valge
The quickMOUNT is a basic wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT gives possibility to turn antenna within 190°. With the quickMOUNT it is possible to simultaneously mount two SXTs thus creating a repeater access point or creating large sector coverage.
Built to Fight Noise With Prism Active RF Filter The Ubiquiti R&D team designed airPrism filtering as a robust solution for tower co-location interference. Requiring no communication between radios – and functioning despite noise from other vendors’ radios (unlike GPS synchronization) – airPrism enables greater system capacity and overall throughput by further reducing out-of-band energy. Using airMAX ac technology, the PrismStationTM delivers throughput speeds up to 500+ Mbps and signal ranges up to 5+ km (3+ miles). It also offers the following features:All horn antennas are optimized for co-location. The asymmetrical versions (60° and 90°) narrow the elevation pattern to increase gain where users need it.Ubiquiti offer three optional antennas with precise radiation angles for specific beam shaping, so you can customize the PrismStation 5AC for your specific installation requirements:Interchangeable horn antennas for enhanced beam shapingHorn feed comes directly from the radio input/output so connectors are eliminatedSingle button release for ease of changing antennasAll metal, shielded radio baseMetal strap for quick pole-mounting30°60°90°Management Wi-Fi Radio The PrismStationTM AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Enhanced Co-Location Asymmetrical horn antenna options (60° and 90°) have naturally attenuated side lobes and extremely low back radiation, and they offer industry-leading front-to-back ratio and low side lobe radiation. Symmetrical horn antennas (30° and 45°, the default) are ideal for cluster sector installations with high co-location requirements.Improved Noise Immunity PrismStationTM AC blocks or spatially filters out noise,so noise immunity is improved.This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Hight MAC Efficiency High MAC efficiency provides ±80% PHY RATE throughput. Modular Design The antenna horn is interchangeable and helps with beam-shaping for specific deployment and environment needs. The PrismStationTM AC also gets maximum gain out of the smallest footprint. Beam Performance Perfected The PrismStationTM can use a variety of horn antenna sectors designed for increased co-location performance without sacrificing gain. Its unique beam performance and superb co-location characteristics allow for a higher density of sectors than traditional sector technology. Now with airOS®8 Sporting an all-new design for improved usability, airOS® 8 is the revolutionary operating system for Ubiquiti® airMAX® ac products
Recently we’ve seen a demand for additional pole-mounting options for our popular SXTsq devices. You ask – we deliver! The new QM-X adapter enables vertical and horizontal adjustment on the pole.It is lightweight, easy to use, extremely durable and without any small parts that might break. Pick it up today for the price of a milkshake and enjoy simple positioning of your SXTsq devices like never before!Compatible devices: SXTsq series, DISC 5
GPON Optical Line Terminal Configuring a fiber network just became as easy as setting up a smartphone. Say goodbye to command lines, manuals, and paid support licenses. Introducing the UFiber OLT – a fiber solution that anyone can deploy. Features: 8 Gigabit Passive Optical Network PortsSupports up to 1024 Clients (128 per PON Port)Up to 2.488 Gbps TX and 1.244 Gbps RXTwo 1G/10G SFP+ Ethernet PortsFlexible Layer 2/3 Management FeaturesFastEthernet port for managementConsole serial port for management Centralized Management Easily configure the OLT and manage multiple sites using the comprehensive UNMS™ (Ubiquiti® Network Management System) software.Rackmount Design The 1U-high metal chassis allows for convenient mounting in a standard-sized, 19"‑wide rack. Client and Uplink Connectivity The OLT features eight PON ports to connect up to 1024 Nano G devices, and two SFP+ ports deliver up to 20 Gbps of uplink connectivity. Power Versatility Featuring low power consumption, the OLT offers two modular power bays. The first bay includes an AC/DC power module. The second bay can house an optional power module, either an AC/DC backup or a DC/DC power module.
Sporting a sleek industrial design, the U Fiber WiFi is a robust, high‑performance GPON CPE that features an informational LED display with 4 Ethernet ports and WiFi. Features: High-Performance GPON CPELED diodes for easy diagnosticsUp to 2.4 Gbps Downstream and 1.2 Gbps UpstreamSupports up to 20 km GPON LinksPowerful Layer 2/3 Management FeaturesGPON WAN Port4x RJ45 Gigabit LAN PortSC/APC Fiber Connector802.11n Wi‑Fi Status LEDs The easy-to-read LEDs provide status information: Ethernet connection, signal strength, and power.Versatile Power The 4 Ethernet LAN ports support 10/100/1000 Mbps connections. The UFiber WiFi can be powered using 24V passive PoE on Port 1, or by 24VDC. Designed for Integration Up to 128 UFiber WiFi devices can be connected to a single GPON port. Supporting GPON links of up to 20 km, the UFiber WiFi integrates with the UFiber OLT and third-party OLT devices.
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: kollane
