A Perfect Managed Edge Switch with Advanced L2/L4 Switching and Security PLANET GS-4210-8T2S is an 8-Port Gigabit Managed Ethernet Switch with SFP interfaces specially designed to build a full Gigabit backbone to reliably transmit and forward data to remote network through fiber optic. It provides 8 10/100/1000BASE-T copper ports and 2 extra 100/1000BASE-X SFP fiber optic interfaces with built-in power system. Besides support for 20Gbps switch fabric to handle extremely large amounts of video, voice and important data in a secure topology, the GS-4210-8T2S provides user-friendly but advanced IPv6 / IPv4 management interfaces and abundant L2 / L4 switching functions. It is the best investment for businesses and SOHOs expanding or upgrading their network infrastructures. Cybersecurity Network Solution to Minimize Security Risks The GS-4210-8T2S supports SSHv2 and TLS protocols to provide strong protection against advanced threats. It includes a range of cybersecurity features such as DHCP Snooping, ARP Inspection Protection, 802.1x port-based and network access control, RADIUS and TACACS+ user accounts management, SNMPv3 authentication, and so on to complement it as an all-security solution. Redundant Ring, Fast Recovery for Critical Network Applications The GS-4210-8T2S supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology and Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in various environments. Environmentally-friendly, Fanless Design for Silent Operation The GS-4210-8T2S with a desktop-sized metal housing is designed to operate quietly and effectively as it is fanless and comes with optimal power output capability. Thus, the GS-4210-8T2S can be deployed in any environment without affecting its performance. IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the GS-4210-8T2S helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Robust Layer 2 Features The GS-4210-8T2S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the GS-4210-8T2S allows the operation of a high-speed trunk to combine with multiple ports, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain. Efficient Traffic Control The GS-4210-8T2S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. It guarantees the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources. Powerful Security The GS-4210-8T2S offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Friendly and Secure Management For efficient management, the GS-4210-8T2S is equipped with Command line, Web and SNMP management interfaces. With the built-in Web-based management interface, the GS-4210-8T2S offers an easy-to-use, platform-independent management and configuration facility. For text-based management, it can be accessed via Telnet and the console port. By supporting the standard SNMP protocol, the switch can be managed via any SNMP-based management software. Moreover, the GS-4210-8T2S offers secure remote management by supporting SSHv2, TLSv1.2 and SNMP v3 connections which encrypt the packet content at each session. Flexible Long-distance Extension Solution The two mini-GBIC ports built in the GS-4210-8T2S support SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (small form-factor pluggable) fiber transceivers to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and to 10/20/40/60/80/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Intelligent SFP Diagnosis Mechanism The GS-4210-8T2S supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Department/Edge Security and QoS Switches for SMBs The GS-4210-8T2S connects up to 10 high-speed workstations in the Ethernet environment, in which its two SFP mini-GBIC interfaces uplink to a department backbone. Moreover, the Switch provides 20 Gigabit per second switch fabric and high bandwidth for backbone connection. The GS-4210-8T2S improves the network efficiency and protects the network clients with the following powerful features: IPv6/IPv4 dual stack management Layer 2 to Layer 4 security and QoS 802.1x Port-based network access authentication security IPv4 Multicast IGMP and IPv6 MLD Snooping The advanced functionality of the GS-4210-8T2S eliminates traditional issues associated with the use of Ethernet. Users can be separated with advanced VLAN functionality to enhance security. It makes the GS-4210-8T2S one of the best and most cost-effective switch solutions for SMBs. FTTX/MAN Application Switch The GS-4210-8T2S features SNMPv3 and RMON Groups security functions. The SNMPv3 security structure consists of security models and helps to isolate each model with its own security levels to enhance the security protections in the FTTX and MAN Network. With its two built-in dual-speed SFP slots, the deployment distance of the GS-4210-8T2S can be extended from 550 meters (multi-mode fiber) to above 10/50/70/120 kilometers (single-mode fiber), thus providing a high-performance edge service for FTTx solutions. To build a network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs, and FTTB (Fiber to the Building) for enterprises, the various distances of SFP (small-form factor) and Bidi (WDM) transceivers are optional for customers’ choices. For security and various applications, the SFP ports of the GS-4210-8T2S can be configured with VLAN settings and connected to different units, offices, floors, houses and departments.
This cable duct by Delock can be used to bundle and conceal exposed cables, to protect them from dirt or damage. Toolless assembly The cable duct is provided with an adhesive tape on the bottom and can therefore be easily and simply attached e.g. to the floor, wall, window frame or baseboard. The adhesive tape also ensures a firm and secure hold. Plenty of space for different cables Depending on the diameter and thickness of the individual cables e.g. antenna cables, HDMI cables, audio cables or power cables can be accommodated. Thus the cables are safely and orderly stowed away. Reusable The upper part of the cable duct can be easily removed by sliding it out to add or remove cables. Specification • self-adhesive • Reusable • Individually shortenable • Environmental temperature: -40 °C ~ 65 °C • Material: PVC • Colour: black • Dimensions (LxWxH): ca. 1000 x 50 x 12 mm Package content • Cable duct
TRENDnet’s 4-Port USB 3.0 Mini Hub, model TU3-H4E, instantly adds four 5 Gbps SuperSpeed USB 3.0 ports to a computer. No CD installation required-simply plug in flash drives, storage enclosures, and other USB 3.0 devices at speeds ten times faster than a USB 2.0 connection. The TU3-H4E is also compatible with older USB 2.0 and 1.1 ports.
The hot-swappable AC/DC PSU modul are compatible with the EdgeRouter Infinity and UFiber OLT. The second module can be used as a backup to the primary PSU.AC/DC 100W for 110 - 240VAC InputPower Options The UFiber OLT includes an AC/DC power module. You have the option to add a second AC/DC power module or use a DC/DC power module for DC power. The EdgeRouter Infinity includes two AC/DC power modules. You have the option to substitute in a DC/DC power module.
Tootja: Gembird Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 (8P8C) Wiring type: CAT5E Lisaandmed: bag of 100tk, 30" gold plated, 3-fork internal contacts for use koos solid LAN kaablid värv: Transparency
PoE power supply dedicated to all QuSpot, QuMax and QuMini antennas with installed all Teltonika routers inside. - Passive PoE Power Supply EU - Output: 24V, 0.8A - Input: AC100-240V 50/60Hz - EU power cord - Wall mount holder included - CE, ATE, HIPOT - Caution: Indoor use only
CAT7 Flat Extension Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 Flat Network Extension Cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper. Network Extension Cable are excellent for extending of your LAN connection to your HDTV Blu Ray Player Home Theater XBox 360 PS3 etc. Used for network adapters hubs switches routers DSL/Cable modems patch panels and other twisted-pair applications.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Extension Cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
With the UniFi In-Wall HD Cover the In-Wall HD AP blends seamlessly into a variety of backgrounds. Available in five different designs and sold as a 3-Pack. * - UniFi In-Wall HD AP sold separately!
1 x 100/1000BASE-T PoE sisendport 1 x 100/1000BASE-SX/LX SFP-pesa PoE toiteallikaga - toiteadapterit ei ole vaja SFP-pesa mahutab multimoodseid või ühemoodseid mooduleid Toetab Link Fault Pass-Through (LFPT) Jumbo Frame (9KB) toetus TRENDneti Gigabit PoE PD SFP Fiber Media Converter, mudel TFC-PGSFP, teisendab 100/1000BASE-T vask-Etherneti 1000BASE-SX/LX Fiber SFP meediumiks ja vastupidi. TFC-PGSFP saab mugavalt toite PoE-lülitist või injektorist, toiteadapterit ei ole vaja. Sellel on üks gigabitine PoE-sisendport toite- ja andmeside jaoks ning üks SFP-pesa, mis toetab nii multimoodilisi (SX) kui ka ühemoodilisi (LX) SFP-mooduleid. SFP-pesa mahutab nii Fast Ethernet kui ka Gigabit SFP-mooduleid, mis tagab täiendava paigaldamise paindlikkuse. Kahe kiirusega SFP-pesa Kahe kiirusega SFP-pesa toetab nii 100Mbps kui ka 1000Mbps SFP-mooduleid multimood- või ühemood-kiudoptiliste rakenduste jaoks. PoE toiteallikaga Ei ole vaja toiteadapterit - see kiudoptiline SFP-muundur saab toite 802.3af/at PoE-lülitist või injektorist kuni 100 m (328 jalga) kaugusele. Kompaktne Väike ja kompaktne metallkorpuse disain tagab suurema paigaldamise paindlikkuse. Pordid 1 x 100/1000BASE-T RJ-45 PoE sisendport, 1 x 100/1000BASE-SX/LX SFP-pesa. PoE toiteallikaga Ei vaja toiteadapterit - see kiudoptiline SFP-muundur saab toite 802.3af/at PoE-lülitist või injektorist kuni 100 m (328 ft.) kaugusele. Kahe kiirusega SFP-pesa Kahe kiirusega SFP-pesa toetab nii 100Mbps kui ka 1000Mbps SFP-mooduleid Jumbo Frame Saadab suuremaid pakette ehk jumbokaadreid (kuni 9 KB), et suurendada jõudlust.
This solid USB hub by Delock with metal housing can be connected to a computer via the USB Type-A interface. It expands the computer by 7 USB Type-A ports. Connected devices such as smartphones can be charged or data can be transferred at 5 Gbps. Each port can be turned on or off individually by using the switches. Specification • Connectors: 1 x USB 3.0 Type-B female > 7 x USB 3.0 Type-A female 1 x 12 V DC jack • Data transfer rate up to: SuperSpeed USB 5 Gbps, Hi-Speed 480 Mbps, Full-Speed 12 Mbps, Low-Speed 1.5 Mbps • 7 x LED indicator • Robust metal housing • Power supply: Bus-powered or Self-powered • Dimensions (LxWxH): ca. 115 x 53 x 23 mm • Colour: grey • Plug & Play Power supply specification • Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1.3 A • Output: 12.0 V / 3.0 A • Ground outside, plus inside • Dimensions: inside: ø ca. 2.1 mm outside: ø ca. 5.5 mm length: ca. 10 mm System requirements • Chrome OS • Linux Kernel 5.8 or above • Mac OS 10.15.6 or above • Windows 8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-A port Package content • Hub USB 3.0 • 1 x cable USB 3.0 A male to USB 3.0 B male, length ca. 1 m • External power supply • User manual
What is the Self-locking cable tie?Qoltec brand Self-locking cable tie are made of flexible and durable nylon. They are designed to connect different types of elements together, such as cable organization. Thanks to their versatility, they are used virtually everywhere. Among other things, they can be found in the household, telecommunications, automotive workshops, gardening, electrical installations, warehouses and more. How to use Self-locking cable tie?The use Self locking cable ties is very quick and easy. Just fit the clamp to the objects to be joined, then put the end of the clamp through the hole and clamp. The clamp is very flexible and elastic, which allows you to easily adjust the clamp. In addition, the evenly spaced teeth on the tip will make it easier to accurately fit the parts to be joined. Choose high qualityThe Qoltec brand Self locking cable tie is a top quality, reusable, tear-resistant product. The Self locking cable ties retain their properties in the temperature range from -35°C to +85°C. They feature UV resistance and chemical resistance.
IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant Supports PoE Class 2 (7 watts) , 3 (15.4 watts), and 4 (30 watts) 4 x Gigabit Auto-MDIX PoE / PoE+ ports 4 x Gigabit Auto-MDIX ports Provides up to 30 watts for PoE+ (2 ports max.) Provides up to 15.4 watts for PoE (4 ports max.) Automatically detects the PoE class level of a Powered Device 16 Gbps switching fabric Forwarding Rate: 1000 Mbps (1,488,000 pps), 100 Mbps (148,800 pps), 10 Mbps (14,880 pps) Status LEDs: System Power, PoE, 1000 Mbps, and Link/Activity 1K Mac address entries 96 Kbyte memory buffer Full wire-speed non-blocking reception and transmission Store-and-forward switching method Back pressure Flow Control for Half-Duplex mode IEEE 802.3x Flow Control for Full-Duplex mode Power saving technology powers down unused ports and when a connected device is in standby mode Jumbo Frame support up to 9K Plug and Play Sturdy metal case 3-year limited warranty
mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accomodate Mikrotik Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable.The antenna comes packaged with all necessary accessories and cables.Note: Basebox wireless device pictured for illustrative purposes. It is not included.
Nagu 522E Seda kasutatakse kõikide lõiketööde tegemiseks kergesti ligipääsetavates kohtades. Massiivne pea võimaldab suurt lõikevõimet ja seda iseloomustab vastupidavus. See on standardne pea kuju.
5-Port 10/100 Mbps PoE SwitchTPE-S50 (Version v1.0R)4 x 10/100 Mbps PoE ports and 1 x 10/100 Mbps port31 W total power budget1 Gbps switching capacitySturdy metal switchPlug and Play installationUse with a TRENDnet PoE Splitter to network and power non-PoE devices
Original part number PP6U-1M/G Product name Gembird UTP Cat6 Patch cord, 1 m, green Producer Gembird Class of product Patchcord network cable Wiring type CAT6 Length 1 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Colour Green
TRENDnet’s high efficiency 120 W Single Output Industrial DIN-Rail Power Supply, model TI-S12048 (Mean Well SDR-120-48), supplies up to 120 Watts (48 V, 2.5 A) of power to industrial PoE equipment such as switches, network cameras, and WiFi access points. This power supply comes with active PFC, an integrated DIN-rail mount, and overload current protection.120 Watt PowerProvides up to 120 Watts (48 V, 2.5 A) of power for PoE devices such as switches, network cameras, and access pointsActive PFCThe built-in active Power Factor Controller (PFC, PF > 0.93) helps eliminate unusable reactive powerOverload ProtectionOverload/short circuit/over voltage/over temperature protectionFull Load TestThis power supply undergoes a 100 % full load burn-in testPassive CoolingCooling by free air convectionDIN-Rail MountMetal enclosure with integrated DIN-rail mountExtreme TemperaturesRated for an operating temperature range of -25 to 70 °C (-13 to 158 °F)Safety CertificationsCertified for UL 508 and TUV EN60950-1Electro Magnetic Emission/ImmunityCompliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2/3, EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A, SEMI F47, and GL approvedVibration ResistantRated for vibrationLED IndicatorLED indicator confirms power to the unitToote tüüpToiteplokkToote värvMetallikLED-indikaatoridJahToite kaitsefunktsioonidÜlepinge, Ülekoormus, LühisKeskmine tõrkeintervall (MTBF)2899000 hSertifikaatCE, UL, TUVKoguvõimsus120 WAC-sisendpinge100 - 240AC-sisendsagedus50 - 60Sisendvool1.8Kasutamistemperatuur (T-T)-25 - 70 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 90 protsentiLaius40 mmSügavus125 mmKõrgus114 mmKaal670 g