Kombineerib vask- ja valguskaablit hübriidse, pikamaa DisplayPort-HDMI ühenduse jaoks Toetab DisplayPort 1.2 ja HDMI 18G eraldusvõimalusi kuni 4K UHD 3840x2160@60Hz 4:4:4 8bit. Paindlik kaabli struktuur kitsa mantli läbimõõduga paigaldamiseks seintesse või kaablikanalisse Kõrge immuunsus RF- ja EM-häirete suhtes 2-aastane garantii Lindy Fibre Optic Hybrid DisplayPort 1.2 - HDMI 18G kaabel on esmaklassiline otseühenduslahendus DisplayPort signaalide laiendamiseks üle uskumatute vahemaade ja HDMI kuvariga ühendamiseks. Hübriidkaablitel on ainulaadne sisemine struktuur, mis ühendab vask- ja valguskaabli, moodustades kvaliteetse lahenduse, mis laiendab signaale palju rohkem, kui on võimalik tavalise vaskkaabliga. See struktuur pakub mitmeid täiendavaid eeliseid, sealhulgas suurt immuunsust RF- ja EM-häirete suhtes, mis tagab, et hübriidkaablid on ideaalne pikenduslahendus kasutamiseks tundlikes elektrirakendustes, sealhulgas tehases ja meditsiinilistes keskkondades. Kaabli paindlik ja kitsas konstruktsioon võimaldab ka lihtsat ja diskreetset paigaldust läbi seinte ja kanalite, mis sobib suurepäraselt loengusaalides või suuremates õpperuumides, kus AV-installatsioonid peavad olema korralikud, tagades, et kogu tähelepanu on suunatud ekraanil olevale sisule. Ühe pika hübriidkaablina tarnituna saab allikat ja kuvarit ühendada otse, nii et ei ole vaja lisatarvikuid ega eraldi saatja- või vastuvõtuseadmeid, mis tagab kasutajale lihtsa paigaldusmeetodi. Toetades kuni 4K UHD 3840x2160@60Hz 4:4:4 8bit, on sisu saadaval kristallselge kvaliteediga. See võimaldab kasutajale täiuslikku visuaalset kogemust, mis sobib suurepäraselt pilkupüüdvate digitaalsete viidete loomiseks jaemüügikeskkondades või kaasahaaravate suuremahuliste avalike ürituste korraldamiseks. See kaabel pakub ka aktiivset signaalide teisendamist, tagades ühilduvuse nii kahe- kui ka mittetulemuslike graafikakaartidega. AMD Eyefinity-tehnoloogia toetus annab kasutajale ka kulutõhusa võimaluse luua mittestandardse kuvasuhtega või ülikõrge resolutsiooniga ekraan, mis koosneb kuni kolmest või enamast ekraanist. See funktsioon võimaldab kasutajal ka mitut rakendust samaaegselt eraldi ekraanidel käivitada, parandades tootlikkust töökohtadel või luues laia ekraaniga mänguelamusi.
Professionaalne valik USB 2.0 tüüp A - B kaabel äri- ja kõrgtehnoloogiliste AV- ja IT-seadmetele Toetab andmeedastuskiirusi kuni 480Mbps Tugev PVC-korpus, nikliühendused ja kullatud kontaktid Kahekordne varjestatud kaabel, korrosioonikindlad vaskjuhtmed
The Lindy 200 m Fiber Optic USB 2.0 Extender supports far longer distances than standard copper cables. It is a compact two-part hardware solution comprising of a transmitter dongle that connects directly to your computer and receiver dongle that connects to the USB peripheral. These are then joined together using LC Multimode Simplex Fiber. The small form factor of the Extender allows for an easy and discreet installation while the use of fiber helps rule out the possibility of electrical interference in the extended signal. Ideal for remote desktop links, industrial control, surveillance and external storage applications the extender gives long distance access to USB keyboards and mice, printers, scanners, webcams, audio devices, disc burners, external drive storage and much more. Connecting a USB hub to the receiver also gives additional access to a larger number of USB devices. For added convenience the Fiber Optic USB 2.0 Extender is supplied with a power supply, which can be connected should additional power be required.
Professionaalne valik USB 2.0 tüüp C – C kaabel äri- ja kõrgtehnoloogiliste AV- ja IT-seadmetele Toetab andmeedastuskiirusi kuni 480Mbps Tugev PVC korpus, kullatud pistikud ja kontaktid Kahekordne varjestatud kaabel USB 2.0, 480Mbps; Anthra Line USB 2.0 tüüp C-C kaablid on saadaval pikkusega 0,5m, 1m, 2m ja 3m
CAT 5e võrgukaabel, U/UTP CCA vase segu varjestamata LAN/võrgukaabel võrgukomponentide ühendamiseks 2 x RJ45 pistikuga sulguri kaitse: "Snagless" RJ45 pistiku disain, et kaitsta RJ45 riivi purunemise või kinnijäämise eest paarisjärjestus acc. EIA/TIA 568B-le sobib Gigabit (10/100/1000 Mbit) võrku
Satechi USB-C Slim Dock on loodud spetsiaalselt 2021 ja 2022 Apple iMac 24" jaoks, millel on valik sisseehitatud liideseid ja minimalistlik disain. • 10 Gbps USB-C liides • 10 Gbps USB-A liides • 2x USB-A 2.0 • micro/SD kaardilugeja • NVMe Sata ühendus
20m Fibre Optic Hybrid Micro-HDMI 4K60 Cable with Detachable HDMI & DVI Connectors Creates a customisable, reliable Micro-HDMI, HDMI or DVI connection over long distances - Combines copper and fibre optic cable for a hybrid, long distance HDMI, Micro-HDMI & DVI connectivity solution - Supplied as a Micro-HDMI Male to Male cable, with detachable HDMI & DVI connectors - Supports HDMI 2.0 18G resolutions up to 4K@60Hz with additional support for HDR - Premium, metal connectors Cable length 20m Connectors Micro-HDMI Male / Micro-HDMI Male, Colour Black
Lae akut ja edasta andmeid oma nutitelefoniga kasutades selleks optimaalset kiirust. Maksimaalne võimalik kiirus on 5 Gbps. • USB-A 3.2 Gen 1 - USB-C 3.2 Gen 1 • Maksimaalne vooluedastus kuni 3A
The compact aluminum AXAGON EE35-XA3 ALINE external box with a high-speed USB 3.2 Gen 1 (USB 3.0) interface intended for 3.5" SATA disks. The UASP support allows you to enjoy the most possible speed of modern hard drives. Reading of S.M.A.R.T. information monitoring the condition of the external disk. Supports spinning down of connected disks as well as the box. Durable cast aluminum case for perfect mechanical protection of the disk and excellent heat dissipation. The decently shaped case with a brushed surface that provides elegant look and prevents unwanted fingerprints. Easy mounting of the hard disk as well as automatic installation can be handled even by a layman and easily create an external disk. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB transmission rates up to 5 Gbit/s. Connection via micro USB type B female conector. Device support: SATA II - 3 Gb/s (300 MB/s) interface, Supports 3.5" HDD. Features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 and backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Supports 3.5" SATA III / II / I disks of all capacities without limitation. Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the SATA/300 interface used (theor. 3 Gbit/s). Supports UASP (USB Attached SCSI Protocol). SSD/HDD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown support - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Connection via durable large USB 3.2 Gen 1 Type B female connector. An USB-B / USB-A cable 80 cm long is included. A blue, decent LED indicates the connection to the computer's USB port (permanent light) and the data transmission (blinking). The durable box body is a cast aluminum alloy, the box faces are plastic. Simple disk installation - the guides are mounted on the disk, the disk is plugged directly into the SATA connector of the motherboard, and inserted into the box body; the front panel is fastened with two screws using a screwdriver that is included. Compact adapter dimensions 180 x 120 x 32 mm. External box weight 244 g (without cables and disk). Power supply: Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. Power switch on the rear panel of the box. AC adapter dimensions 74 x 36 x 91 mm (incl. fork). AC adapter weight 128 g (incl. supply cable). Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 external box for 3.5" SATA disk, USB-B - USB-A cable 80 cm long, power adapter 100-240V / 12V-2A, mounting strips, screws and the screwdriver, a stand that allows the box to be operated in upright position, printed installation guide in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
This cable by Delock is used to connect devices with a DisplayPort interface, such as monitors or TVs, to a PC or a laptop.10K resolution and HDR supportBy supporting a maximum bandwidth of 54 Gbps, content up to 10K (10240 x 4320 @ 60 Hz) resolution can be displayed.Due to the HDR support colours are realistically displayed with impressive depth, brightness and contrast are optimally reproduced.SpecificationConnectors:1 x DisplayPort male >1 x DisplayPort maleDisplayPort 2.0 specificationDownwards compatible to DisplayPort 1.4, 1.3, 1.2 and 1.1Pin 20 not connectedCable gauge: 28 AWGCable diameter: ca. 7 mmCopper conductorTriple shielded cableContacts gold-platedConnector finishing: gold-platedTransmission of audio and video signalsData transfer rate up to 54 GbpsResolution up to:Display with DSC support:10240 x 4320 @ 60 HzDisplay without DSC support:10240 x 4320 @ 30 Hz(depending on the system and the connected hardware)Supports Display Stream Compression 1.2a (DSC)Supports HDR10Supports HDCP 1.4 and 2.3Supports UHBR 13.5 (13.5 Gbps / Lane) data rateUp to 32 audio channels for speakersUp to 1536 kHz audio sampling rateSupports colour sampling in 4:4:4, 4:2:2 and 4:2:0 formatColour: blackLength incl. connectors: ca. 2 mSystem requirementsA free DisplayPort interfacePackage contentDisplayPort cable
Seda Delocki pinnale paigaldatavat pistikupesa saab kasutada modulaarse pistikupesana seinal või kappides. LSA plokke saab kasutada löögitööriistaga; alternatiivselt on võimalik ka kaabli tööriistavaba ühendamine.SpetsifikatsioonLiitmikud:välised: 2 x RJ45 pesasisemine: LSA plokk (toolless)Kaabli marsruutimine 180°Varjestatud (Cat.6)TIA-568A/B pinoutKaabli läbimõõt kuni 0,644 mm (22-26 AWG)Integreeritud nimeplaatVärv: valgeMõõtmed (LxSxK): ca. 62,3 x 60 x 26 mmPakendi sisuModulaarne seinapistikupesaLiimiplaat, 45 x 45 mm2 kruvi
USB-C™ Supersoft tekstiilkaabel metallist pistikutega, valgeElegantne ja eriti vastupidav ühenduskaabel USB-C™ pistikuga seadmeteleTugev kaitse koos täieliku võimsusega: tänu väga paindlikule silikoonist ja tekstiilist kattele peab USB-kaabel vastu kõigile igapäevastele ja reisidel esinevatele raskustele. Selle 60 W kiirlaadija abil kuuluvad kaabli katkemine ja energiapuudus minevikku.USB-C™ ühildub järgmiste Apple iPhone'i ja Apple iPadi mudelitega:iPhone 15, iPhone 15 Plus, iPhone 15 Pro, iPhone 15 Pro Max, iPad Pro 12,9" (Gen. 3, 4, 5, 6), iPad Pro 11" (Gen. 1, 2, 3, 4), iPad Air (Gen. 4, 5), iPad (Gen. 10), iPad mini (Gen. 6).Vastupidav laadimis- ja andmesidekaabel, millel on tekstiiliga kaetud silikoonist ümbris, mis tagab maksimaalse paindlikkuse ja tõhusa kaitse kaabli purunemise eest.USB-C™ laadimiskaabel pakub ülikiiret laadimist koos max. 60 W ja kiire andmeedastus kiirusega kuni 480 Mbit/s.Tugevdatud metallliitmikud koos paindumiskaitsega on mõeldud üle 10 000 painutustsükliks, mis muudab USB-C™-lt USB-C™ laadimiskaabli äärmiselt vastupidavaks.USB-pikenduse punutud, vastupidavast tekstiilist ümbris on meeldiva tunnetusega ja õrnatoimeline tundlike pindade suhtesUSB-kaabel ühildub tavaliste tootjate nutitelefonide, tahvelarvutite või sülearvutitega ning toetab ka Apple MacBooki laadimisfunktsiooni
This active HDMI AOC Hybrid Fiber Optic Cable is ideally suited for transferring uncompressed video and audio data with high bandwidth over longer distances. The hybrid construction, which uses copper and fiber optic cable, prevents electromagnetic interference. This ensures a loss-free transfer along the entire length of the cable with UHD resolution of up to 4K/60 Hz and bandwidths of up to 14.4 Gbps. The use of fiber optic cable keeps the diameter of this active cable very low (OD: 5.2 mm). The steel and aramid fiber construction of the cable ensures optimal protection against external forces, making the cable crush-proof and puncture-resistant. When the cable is not in use, the protective sleeves protect the connections (IP68). The ideal companion for use at trade fairs, concerts and other events. The simple Plug and Play installation is user-friendly; just plug it in and immediately enjoy optimal image quality. It supports numerous standards such as HDMI, HDCP 2.2 and HDR. Some of the many audio features supported are ARC, DTS-HD Master Audio and Dolby TrueHD. Cutting edge chip technology makes it possible to transfer the full HDMI signal spectrum while also supporting uncompressed CED and EDID with very low latency.
Lindy's Active DisplayPort to HDMI cable range combine superior performance with stylish design to provide a high-quality conversion of DisplayPort 4K @ 60 Hz signals to output to a HDMI display or projector. This range of active cables come with an in-built chipset to not only provide a reliable connection, but also enhance compatibility with both dual mode and non-dual mode graphic cards and source devices, perfect for use with DP graphics cards, laptops and PC's, while avoiding the need for additional adapters. With support for resolutions up to 4096 x 2160 @ 60 Hz and with additional support for High Dynamic Range, 4K content can be viewed with crystal clear clarity, enhanced contrast and more lifelike color. These cables are great for creating eye-catching retail displays, innovative working environments or immersive video playback in sports bars and home cinema installations, while support for uncompressed multi-channel audio allows for an impressive three-dimensional surround sound performance to compliment detailed, clear video. Support for AMD Eyefinity technology also brings the user a cost-effective way of creating a non-standard aspect ratio or ultra-high-resolution display made up from up to 3 or more monitors. This feature also allows the user to run multiple applications simultaneously on separate screens, improving productivity in the workplace or creating a widescreen gaming experience.
RJ45 UTP patch network cable. Used to connect a computer to a broadband modem/LAN/switch etc. Can also be used between switches and in distributor boxes. The CAT6 standard is an improved version of CAT5e, specially designed to support 1000 Mbit/s Ethernet with an optimal transfer rate and minimal data packet loss. The cable also supports 10 and 100 Mbit/s Ethernet, which enables the speed to be optimised.Kaabli pikkus1 mKaablistandardCat6Pistmik 1RJ-45Pistmik 2RJ-45SuguSisestatav konnektor/sisestatav konnektorKaabli kateU/UTP (UTP)Toote värvValgeRoHS-vastavusJahLaius167 mmPakendi laius70 mmPakendi sügavus40 mmPakendi kõrgus167 mmPakendi kaal64 g
The new DIGITUS Patch Cable series is back with a reworked plug on the market. The Bend protection sleeve with latch protection prevents snagging the cable and also protects the latching lever before break. The connector can be different in color depending on the category: a blue plug for CAT5e, a red plug for CAT6 and a yellow plug for CAT6A. We also offer a variety of different colors and lengths to meet all demands.For more information, please see our Patch Cable brochure!- 2 x RJ45 connectors- Plugs with new design- Boots with kink protections and strain reliefs- Spot length on boot- Material: CuKaabli pikkus3 mKaablistandardCat6Pistmik 1RJ-45Pistmik 2RJ-45Kaabli kateS/FTP (S-STP)Toote värvPunaneSuguMale/MalePistmikukontaktide kateVaskMantli materjalMadala suitsu null halogeen (LSZH)AWG-juhtme läbimõõt26Kasutamistemperatuur (T-T)-20 - 60 °C
- Category 6 according to link performance EIA TIA 568, ISO IEC 11801 Class E, EN 50173- For up to 250 MHz- 3P channel and permanent link certified- Shielded 2 x RJ45 sockets, 8P8C, strain relieving 40°socket angle- Integrated installation cable strain relief- Enclosed metal die cast housing- Flush mount / surface mount ready- Cable installation via LSA strips, colour codes based on EIA/TIA 568 A & BPistmik(ud)RJ-45Kogus pakendi kohta2
Original part number Y-272 Product name Unitek Cable USB 2.0 Active Extension, 10m, Alu., Y-272 Producer Unitek Class of product Cables - USB | FireWire | PS/2 | (e)SATA | ATA Basic information Basic information USB plugs 1x USB 2.0 Cable length 10 m Other information Other information Gold plated plugs Yes Cable colour Black Additional information cover- Aluminum
