Wireless fire detector with temperature sensor that monitors security in the room twenty four hours a day and immediately notifies of smoke and sharp jumps in temperature. - Registers smoke and sharp jumps in temperature in the room - Can operate independently from Ajax Hub, notifying of danger by means of a built-in siren - Independently tests the smoke chamber and gives prompt notification of the need to dust Detector Type Fire Wireless, Power supply requirements Battery: Two CR2 batteries, 3 V Colour Black, Dimensions 132 × 132 × 31 mm
Põletutooli suitsuanduri komplekt, 2x RM L 3100 integreeritud akuga (10 -aastane aku, kontrollitud ja sertifitseeritud vastavalt VDS DIN EN 14604) Valge
Narrow beam indoor motion detector. Protects windows, doors, and valuables. With the MotionProtect Curtain detectors, you can secure the perimeter of your house and freely move indoors. If a stranger breaks in, the system will raise an alarm and call the security company. - Detects motion with a range of up to 15 meters - Works up to 3 years on the pre-installed battery - Transmits alarms at a distance of up to 1,700 meters away from the hub Detector Type Motion Detection technology PIR, Detecting area up to 15 meters Wireless, Operating temperature range −10°С to +40°С Colour White, Included Accessories SmartBracket mounting panel,CR123A batteries (pre-installed),Bracket,Installation kit,User’s guide. Dimensions 134 × 44 × 34 mm
Wireless combined motion and glass break detector. The device helps to secure the room from intruders entering through doors and windows, and monitors the current state of the glass. - Operates up to 5 years without battery replacement - Ignores cats and dogs with weight of up to 20 kg and height up to 50 cm - Detects motion at a distance of up to 12 m and glass breakage at up to 9 m Detector Type Motion Wireless, Operating temperature range -10°С to +40°С Power supply requirements Battery: CR123A battery, 3 V, Colour Black Dimensions 110 × 65 × 50 mm
Wireless fire detector with temperature sensor that monitors security in the room twenty four hours a day and immediately notifies of smoke and sharp jumps in temperature. - Registers smoke and sharp jumps in temperature in the room - Can operate independently from Ajax Hub, notifying of danger by means of a built-in siren - Independently tests the smoke chamber and gives prompt notification of the need to dust Detector Type Fire Wireless, Power supply requirements Battery: Two CR2 batteries, 3 V Colour White, Dimensions 132 × 132 × 31 mm
Wireless motion detector with microwave sensor that notifies the owner of first signs of home or office intrusion. Designed for rooms with air conditioners, fireplaces and where there is a likelihood of light flickering, glare and reflections. - The additional microwave sensor filters possible interference from the air conditioner and curtain movement - The device operates up to 5 years without battery replacement - Ignores pets weighing up to 20 kg and with a height up to 50 cm Detector Type Motion Detection technology PIR, Detecting area Up to 12 m Wireless, Operating temperature range -10°С to +40°С Colour White, Included Accessories SmartBracket mounting panelCR123A battery (pre-installed),Installation set,User’s guide. Dimensions 110 × 65 × 50 mm
Wireless opening detector that notifies of first signs of room intrusion by means of a broken door or window. It can be mounted on all types of doors including a metal base. - Operates up to 7 years without battery replacement - External contact is available for connecting third-party detectors - Includes magnets of various sizes for installation on narrow frames and door frames Detector Type Motion Wireless, Power supply requirements Battery: CR123A battery, 3 V Colour Black
Wireless flood detector detects first signs of leakage within milliseconds. It is installed without using tools. - Raises the alarm as soon as water gets on one of the four pairs of contacts - Registers when the area dries out and cancels the alarm - The detector mounts by placing on the floor in areas of possible water inflow Detector Type Flood Wireless, Operating temperature range 0°С to +50°С Power supply requirements Battery: Two AAA batteries, 3 V, Colour Black Dimensions 56 × 56 × 14 mm
Wireless opening detector that notifies of first signs of room intrusion by means of a broken door or window. It can be mounted on all types of doors including a metal base. - Operates up to 7 years without battery replacement - External contact is available for connecting third-party detectors - Includes magnets of various sizes for installation on narrow frames and door frames Detector Type Motion Wireless, Power supply requirements Battery: CR123A battery, 3 V Colour White
Volume: 85 Environment requirements: - Temp. -10 ° C ~ 50 ° C Dimensions: 107 x 35 mm Other features: - Sensor: photoelectric- Sensor life: 10 years- Power consumption (standby): 8μA- Current (alarm): 10mA
- Operates up to 7 years without battery replacement - Ignores thunder, dogs barking and noise outside the window - Detects breakage at a distance of up to 9 m Detector Type Glass break Wireless, Power supply requirements Battery: CR123A battery, 3 V Colour White
Wireless motion detector that notifies the owner of the first signs of home or office intrusion. The detector is fastened to the wall in front of the doors and other places likely of intruder entry. - Operates up to 5 years without battery replacement - Ignores cats and dogs with weight of up to 20 kg and height up to 50 cm - Accurately detects motion in heat conditions, even at a temperature of +40°? Detector Type Motion Detection technology PIR, Detecting area Up to 12 m Wireless, Operating temperature range -10°С to +40°С Colour Black, Included Accessories SmartBracket mounting panelCR123A battery (pre-installed),Installation set,User's guide. Dimensions 110 × 65 × 50 mm
Elegant, slim enclosure is made of high quality plastic. Uniform appearance of all detectors installed in the premises makes it difficult for an intruder to identify the specific model used in the system because all of them look the same. compliance with EN 50131 Grade 3 configuring operating parameters: buttons and keyfob end-of-line resistors - 1.1 k? end-of-line resistors - 4.7 k?, 5.6 k? plug-in terminal block electronics board protecting cover 7 available LED indicator colors active IR anti-masking creep zone protection Detector Type Motion Detection technology PIR, Detecting area 20 m x 24 m, 90° Operating temperature range -10°C...+55°C, Power supply requirements 12 V DC Dimensions 62 x 137 x 42mm
K7DCO carbon monoxide sensor equipped with a Kidde electrochemical sensor, guaranteeing 10 years of operation. Battery power supply allows the detector to be mounted in an optimal place in the room and provides protection also in the event of a power failure in the network. The built-in LCD display shows the concentration level of carbon monoxide in the range from 0 to 999 PPM. CO concentration measurements are performed every second. Exceeding the permissible CO level is signaled optically (red LED) and acoustically (loud, pulsating sound alarm with a strength of 85dB). The device's memory stores information about the detection of CO concentration exceeding the level of 100 PPM. Thanks to this, the user can make sure that there is no emission of carbon monoxide during his absence in the room. The sensor has a test / reset button that allows you to check the device's operation and reset the alarm signal, as well as a button when pressed, which displays the highest detected CO level stored in the sensor's memory. The sensor also has the function of informing about the activation of the alarm in the last 14 days. Thanks to this, the user can make sure that there is no emission of carbon monoxide during his absence in the room. The efficiency control system monitors on an ongoing basis, among others: the sensor, internal circuits and the state of the battery. In the event of a malfunction or low battery level, the yellow LED blinks, the LCD panel displays the appropriate graphic information and an audible signal sounds. In addition, the sensor is equipped with a simulation test function that allows you to quickly check the correct response of the sensor to the CO test gas. Thanks to the special shock-resistant design, the detector has been approved for use not only in houses and apartments, but also in caravans, motorhomes and boats. After 10 years from the activation of the power supply, the sensor will remind you to replace the device. K7DCO is marked with the B building mark confirming compliance with the Polish standard PN-EN 50291-1: 2018 + AC 2021 for home carbon monoxide detectors. The research was carried out by the Scientific and Research Center for Fire Protection, National Research Institute. Józef Tuliszkowski (CNBOP-PIB) and has a BSI certificate confirming compliance with the requirements of BS EN 50291-1: 2018 issued by the British Standards Institution (BSI). Additionally, the K7DCO sensor is certified to meet the requirements of BS EN 50291-2: 2019 (PN-EN 50291-2: 2020) and allows the device to be used in camping vehicles and boats. Compliance with the above-mentioned standard has been confirmed by the independent research unit of the British Standards Institution.
Testitud vastavalt standardile EN14604CE sertifikaatKorpusel LED indikaatorTesti funktsioonAnnab märku kui patarei laeng on ebapiisavLihtne paigaldadaEi vaja kaableidKomplektis 9V patarei
Wireless motion detector that notifies the owner of the first signs of home or office intrusion. The detector is fastened to the wall in front of the doors and other places likely of intruder entry. - Operates up to 5 years without battery replacement - Ignores cats and dogs with weight of up to 20 kg and height up to 50 cm - Accurately detects motion in heat conditions, even at a temperature of +40°? Detector Type Motion Detection technology PIR, Detecting area Up to 12 m Wireless, Operating temperature range -10°С to +40°С Colour White, Included Accessories SmartBracket mounting panelCR123A battery (pre-installed),Installation set,User's guide. Dimensions 110 × 65 × 50 mm
Alates 01.01.2018 muutus vingugaasiandur Eestis kohustuslikuks. Andur tuleb paigaldada kõikidesse eluruumidesse, mida köetakse gaasiga või milles asub korstnaga ühendatud gaasiseade, näiteks veesoojendi. Päästeamet soovitab anduri ...
- Split-spectrum sensor technology - Test and hush features in one single button - Loud sound output over 85 dB(A) at 3 meters - Low quiescent current consumption - Surface-mount device (SMD) circuit board design - Low battery warning signal - Battery Life: 10 year, 3V CR123A lithium battery (replaceable) - TÜV and CE listed, EN 14604:2005+AC:2008 Detector Type Fire Operating temperature range -10°C to +55°C, Power supply requirements 3V CR123A lithium battery (replaceable) Colour White, Dimensions φ98 mm × H43.1 mm
Wireless fire detector with smoke and temperature sensors. Built-in non-replaceable lithium batteries, up to 10 years of battery life. FireProtect 2 is a next-gen device designed for instant fire detection. The unique smoke chamber does not require regular cleaning, the dual-spectrum sensor distinguishes smoke from steam, the thermistor quickly reacts to the synthetic materials burning, and sophisticated software minimizes false alarms. Everything meets the most modern fire safety standards. Thought-out design, mounting, and the in-app settings make installation straightforward and quick. Detector Type Fire Wireless, Operating temperature range 0°C to +50°C Power supply requirements 2 non-replaceable lithium batteries, Colour Black Dimensions 123.7 × 123.7 × 44.7 mm
Model name Smart Smoke Alarm (Without Hub) | Wireless Frequency Range 2.4GHz | Colour White | Dimensions Alarm: φ120 × 36.7 mm Hub: 59 × 41 × 21 mm | Unit Net Weight 0.405 kg
Wireless fire detector with smoke and temperature sensors. Replaceable battery version, 2 × CR123A battery, Up to 7 years of battery life, included. FireProtect 2 is a next-gen device designed for instant fire detection. The unique smoke chamber does not require regular cleaning, the dual-spectrum sensor distinguishes smoke from steam, the thermistor quickly reacts to the synthetic materials burning, and sophisticated software minimizes false alarms. Everything meets the most modern fire safety standards. Thought-out design, mounting, and the in-app settings make installation straightforward and quick. Detector Type Fire Wireless, Operating temperature range 0°C to +50°C Power supply requirements 2 × CR123A battery, Colour White Dimensions 123.7 × 123.7 × 44.7 mm
Wireless opening detector notifies of first signs of intrusion into the room through the door or window. It is installed even on roof windows which can be left open when leaving the house. - Operates up to 5 years without battery replacement - Registers change in vertical slope angle, bangs and vibration - External contact is available for connecting third-party detectors Detector Type Motion Wireless, Power supply requirements Battery: CR123A battery, 3 V Colour White
Range: 3 Volume: 85 Special functions: - Technology: optical- Test & Hush ™ button: to control and operate the device and to switch off the alarm triggered by mistake- End-of-life indication: sound and light for 30 days before 10 years after power activation- Ceiling / wall mounting method (mounting screws included)- Power supply: DC, built-in battery - does not need to be replaced over the entire life of the sensor Environment requirements: - Operating temperature: 0 ° C - 40 ° C- Humidity: up to 93% RH, non-condensing Accessories included: Mounting screws Dimensions: - Diameter: 104 mm- Height: 42 mm Weight: 128 Other features: Certificates and approvals:- PN-EN 14604: 2006P- EN14604: 2005 / VDS Q- CE 086-CPD-535595
