The Techmount is a universal projector ceiling bracket designed to secure most video data projectors safety and sturdily to your ceiling.We only have one projector ceiling bracket in our range: it comes with a 1.1m pole and it is designed to be useful in 99% of installations. That means built in flexibility allowing quick assembly in a number of different configurations, including "flush-mount" where the projector is as close to the ceiling as possible.We believe the fixed pole style we use is the best for rigidity, and because you cut it to length onsite, it has an infinitely variable length.Safety ApprovedWe believe it is good practise to use a safety fall-arrest tether which secures the projector to your bracket, so we've included one.20kg SWLIndependent testing on calibrated hydraulic test equipment has shown a breaking-strain of half a ton! We recommend a maximum safe working load of 20kg which is well within it's limits.Obstruction-free Cable ManagementRather than having a long bolt that runs through the pipe and blocks cable access, we use our unique quad-bolt Chute-through system which leaves cable access clear - even for a big VGA connector.SecureWe believe quick-release mechanisms make life easier for thieves, so our mount is secure and features security bolts.Sloping Ceilings?If you have a sloping ceiling there is a tilting mechanism included which tilts to a full 90 degrees, allowing you to use the bracket as a boom if need be.Tools IncludedA spanner and pin-hex key are included. The only tool you'll need is a 2" pipe cutter (NOT INCLUDED - ask your hardware supplier for a pipe cutter with a 6-67mm range, and a metal cutting disk). With this tool you'll cut the pole like a knife through butter.We've also included a drilling jig so you can easily and accurately drill 9mm holes into the pole.Easy fitFitting the bracket to the projector is simple; most projectors have threaded inserts in the bottom for attachment. But because not all use the same diameter screws we provide a selection of screws to suit almost all projectors. Simply adjust the arms on our bracket over the attachment holes, and insert a screw into the projector.Finish the job properly!TM-1200 Trim DiskAesthetics are also enhanced by our exclusive retrofittable trim disk which is fitted to the pole in false-ceiling environments to properly finish the installation.Kinnituse tüüpLagiMaksimaalne kaal (mahutavus)20 kgToote värvValge
6 Tips for a longer lamp life:- Never touch the lamp - use a cloth.- Never touch the glass - use gloves.- Keep the air filter clean - keeps the lamp cool.- Never switch off the projector by disconnecting the power. Use the normal procedure to secure proper cool down.- Do not create vibrations or move the lamp when it is warm - it's very fragile.- On projectors with hi/low mode use the low when possible.BrändiühilduvusMitsubishi ElectricÜhilduvusXD550U, XD560U, XD570UPirni võimsus200 WLambi tööiga2000 h
6 Tips for a longer lamp life:- Never touch the lamp - use a cloth.- Never touch the glass - use gloves.- Keep the air filter clean - keeps the lamp cool.- Never switch off the projector by disconnecting the power. Use the normal procedure to secure proper cool down.- Do not create vibrations or move the lamp when it is warm - it's very fragile.- On projectors with hi/low mode use the low when possible.BrändiühilduvusHitachiÜhilduvusCP-WX8, CP-X2520, CP-X3020, CP-X7, CP-X8, CP-X9, ED-X50, ED-X52Pirni võimsus200 WLambi tööiga5000 h
Diagonal: 86 Screen size: 200 x 200 cm Image size: 190 x 106,9 cm Other features: Black TOP: 88.1 cm Black bottom: 5 cm Case length: 208.1 cm Cassette cross section: 6.7 x 7.5 cm Surface type: Matt Gray SRC secure winding system
Avtek Tripod Pro 200x200 1:1 Matt WhiteWhite metal casingErgonomic carriage and height adjustment handlePortable, lightweight folding tripod easily kept in vertical positionKeystone effect eliminated by special arm that adjusts screen angleAspect ratio 1:1, 4:3 (SVGA/XGA), 16:9 (Full HD), 16:10 (WXGA) (manual adjustment)High quality Matt White projection surfaceGain factor 1.0Black frames increase perceived contrast ratio Type Tripod Screen Technology Control type: TripodScreen dimensions: 2000 x 2000 mmViewing area:1950 x 1950 mmmRatio:1:1Housing cross-section:ø65 mmProjection surface:Matt White Compatibility n/a Interface n/a PackageContents n/a SystemRequirements n/a Color White Width n/a Depth n/a Height n/a Weight n/a Warranty 2 years
The genuine Epson ELPLP87 ultra high efficiency (UHE) projector lamp is designed to replace the lamps for Epson PowerLite 520, 525W, 530, 535W, and BrightLink 536Wi projectors.BrändiühilduvusEpsonÜhilduvusPowerLite 520, 525W, 530, 535W, BrightLink 536WiLambi tüüpUHE
The PPC 1555 projector mount is specially designed for the latest generation of projectors weighing up to 15 kg. This projector interface is equipped with fine tune adjustability for precise alignment with the projection surface. Once aligned, the projector stays in position. Turning the unique friction ring will eliminate all play from the interface connections, making the mount a solid and very stable solution.The height adjustable projector ceiling mount kits can be used when the height of the ceiling is not known or when flexibility is wanted. These mounts come in 3 lengths offering variable height adjustment from 400 to 1350 mm. The CIS Cable Inlay System runs the full length of the pole and even allows for cable routing after installation. The CIS offers sufficient space for all cables required and enables you to hide all the cables in a matter of seconds.Kinnituse tüüpLagiMaksimaalne kaal (mahutavus)15 kgLaepaigaldustoru pikkus (minimaalne)55 cmLaepaigaldustoru pikkus (maksimaalne)85 cmTeleskoopilineJahKaldenurk-15 - 15°Toote värvValge
