Direct attach cable that supports not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard!Mikrotik is releasing new direct attach cables that support not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of new CCR2004-1G-12S+2XS) for very short distances within racks and across adjacent racks. They provide a low cost low power and low latency interconnect solution for 25-Gigabit Ethernet Fiber Channel and other industry standards and are direct attached compliant and fully conform to the SFP+ MSA specifications.Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
Bluetooth tags play a huge role in IoT setups where Bluetooth used to broadcast the data over short distances. You can use these small devices for proximity-based tracking of various objects. For example if you have a KNOT gateway in different parts of a construction site you can use these tags to locate construction tools electrical equipment and other assets.Just attach the tags to the necessary items and the nearest gateway will sense the tags in its proximity. Exceptionally useful in warehouse logistics — let your cargo inform you as soon as it enters the warehouse! They use so little power that a single built-in 220 mAh battery will last for years.Once activated the tag will broadcast iBeacon Eddystone or MikroTik telemetry advertising packets to the gateway (such as the KNOT or any other BLE gateway). These packets contain MAC address used for ID as well as telemetry data — such as acceleration tilt and battery charge level. The gateway then pushes the data to the remote server utilizing MQTT or HTTP protocols. By default advertisement packets are sent once every 5 seconds but you can change this value to your liking. For example if you set the interval to 1 second the battery will typically last two years. The built-in accelerometers can not only detect acceleration (movement) but can also register if the device was dropped or tilted (free-fall detection). The indoor version of our BLE tags works best in a temperature range from 0 °C to 70 °C. It is splash-proof and comes with a built-in accelerometer.
The Sleeve30 kit for Mikrotik mANT30 parabolic antenna will enhance point-to-point link performance by reducing noise and will also reduce impact on adjacent RF devices by removing the side radiation from the antenna. Sleeve30 Kit also reduces wind load and protects antenna reflector and feed from harsh environment improving PtP link sustainability. Sleeve30 shell is made of corrosion resistive lightweight aluminum; front cover has excellent RF signal transparency. Includes aluminum shell front cover fasteners silicone sealant.
Allows adjustment both vertically and horizontally Supports all LHG series products including LHG XL. Made from metal. Package also includes a U-bolt and a mounting kit.
The SXT SA5 ac is a new member in Mikrotik 802.11ac product lineup SXT SA5 AC model with a 90 wide beamwidth sector antenna. Also supports 802.11aс mode and is compatible with all legacy RouterBOARD devices including Nstream and Nv2 protocols. Device comes with Gigabit Ethernet. • Up to 1300mW RF output • Extended temperature range -30C to +80C • Up to 540Mbps throughput • Low latency Point to Point • Supports passive PoE and 802.3af/at PoE input (15-60V)
The SXTsq 5 ac is a compact and lightweight outdoor 5Ghz 802.11ac wireless device with an integrated antenna perfect for point-to-point links or as a CPE unit. The device includes one 10/100/1000 Mbit Ethernet port to fully utilize speeds that 802.11ac protocol provides. The SXTsq 5 ac retains a 16 dBi antenna like the SXT 5 ac our previous model yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner. The weatherproof enclosure includes slots for directly attaching a hose clamp mount in three different mounting places with ability to be mounted on horizontal railings.There is also an easily accessible grounding connection to protect it against lightning. The device can be mounted on horizontal and vertical poles and masts but for precise alignment separately available is the QuickMount Pro which allows to adjust in every angle (see photo and related product). - SXTsq 5 AC-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. - SXTsq 5AC (International) supports 5150MHz-5875MHz range.Included Parts Wireless specifications 5 GHz Transmit power (dBm) Receive Sensitivity 6MBit/s 25 -96 54MBit/s 21 -80 MCS0 25 -96 MCS7 20 -75
The SXTsq Lite2 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point-to-point links or as a CPE unit. It is compact weatherproof and easy to mount. The SXTsq Lite2 retains a 10 dBi antenna like the SXT Lite2 our previous model yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner.The enclosure includes slots for directly attaching a hose clamp mount in three different mounting places with ability to be mounted on horizontal railings. The device includes one 10/100 Mbit Ethernet port. There is also an easily accessilble grounding connection to protect it against lightning.Included parts
The SXTsq Lite5 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point to point links of up to 12 kilometers or as a CPE unit. It is compact weatherproof and easy to mount. The SXTsq Lite5 retains a 16dBi antenna like the SXT Lite5 our previous model yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner (see photos for comparison). The device can be mounted on horizontal and vertical poles and masts but for precise alignment separately available is the QuickMount Pro which allows to adjust in every angle (see photo and related product). - SXTsq Lite5-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. - SXTsq Lite5 (International) supports 5150MHz-5875MHz range.Included Parts Wireless specifications 5 GHz Transmit power (dBm) Receive Sensitivity Transmit power (mW) 6MBit/s 25 -96 316 54MBit/s 20 -80 100 MCS0 25 -96 316 MCS7 19 -75 79
For extra network coverage (up to 3-4 km in the line of sight) Mikrotik suggest adding an external 8dBi Omni antenna — the TOF-2400-8V-4. If necessary this antenna can be used for any 2.4 GHz device. Not only it works with the 2.4 GHz LoRa® connectivity it also supports the regular 2.4 GHz WLAN. It comes with a 1 m long SMA cable and a mechanical holder for quick and easy mast attachment — when you need that extra network coverage. Compact size and increased durability without sacrificing the power — this antenna will get the job done.
24HPOWHigh power 24V 2.5A power supply Recommended for long cable runs with several high power wireless cards.IEC C7 power cord is not included. Output Voltage 24V 2.5A Tested ambient temperature -30℃ to +50℃
48 V 2 A 96 W power supply to be used with our products that support 48 V POE output like hEX PoE and CRS112-8P-4S-IN. It’s providing 30% more current than the old model 48POW (48 V 1.46 A 70 W) allowing more power per port. Comes with the power plug of your choice (EU US or UK version).
MT48-570080-11DG is 57 V 0.8 A power supply. It's part of our GPEN concept that provides all the benefits of GPON but utilizes well-proven simple and inexpensive Ethernet solutions.MT48-570080-11DG allows using long Ethernet cable runs and multiple GPER units - please refer to the table in the last page of GPEN concept brochure in the link below.
This version of our BLE tags comes completely sealed cast in industrial-grade molds to give it a solid IP69k ingress protection rating. In other words this tag is dust-tight — nothing gets in and it is fully protected against close-range high-pressure high-temperature spray downs. Perfect for industrial telemetry systems or to track all kinds of heavy equipment and materials at a construction site.Like the indoor version this tag also supports iBeacon Eddystone and MikroTik telemetry formats. There is an NFC encoded MAC address and optional encryption. Unlike the indoor version the outdoor tag comes with a built-in temperature sensor that can be used for condition monitoring. The ±0.5 °C precision can be very useful in cold supply chain logistics.TG-BT5-OUT features an improved 550 mAh battery that will last around five years (with a sending interval of 1s). It is suitable for strapping to all kinds of surfaces and it can handle a temperature range of -20 °C to 85 °C.
The wAP 60G and wAP 60G AP are weatherproof integrated 60GHz wireless units that can be used indoors or outdoors in different scenarios - Base Station (only wAP 60G AP) Point-to-Point and CPE (wAP 60G AP and wAP 60G). The box includes a wall mounting kit straps for pole mounting power supply PoE injector and also table stand for using the device indoors. Penetrates some windows depending on material. wAP 60G AP and wAP 60G allows to create high-speed Point-to-Multipoint setup setup in 60GHz frequency that is not affected by the crowded WiFi spectrum. In such scenario wAP 60G AP (comes with RouterOS L4 license for AP connections and 60 degrees antenna) can be used as Base Station / Access Point. wAP 60G AP supports up to eight simultaneous clients (wAP 60G with L3 license) on distances of 100m+. RBwAPG-60ad-A - Included Parts
The wAP 60G and wAP 60G AP are weatherproof integrated 60GHz wireless units that can be used indoors or outdoors in different scenarios - Base Station (only wAP 60G AP) Point-to-Point and CPE (wAP 60G AP and wAP 60G). The box includes a wall mounting kit straps for pole mounting power supply PoE injector and also table stand for using the device indoors. Penetrates some windows depending on material. wAP 60G AP and wAP 60G allows to create high-speed Point-to-Multipoint setup setup in 60 GHz frequency that is not affected by the crowded WiFi spectrum. In such scenario wAP 60G AP (comes with RouterOS L4 license for AP connections and 60 degrees antenna) can be used as Base Station / Access Point. wAP 60G AP supports up to eight simultaneous clients (wAP 60G with L3 license) on distances of 100m+. RBwAPG-60ad-A - Included Parts
A small package with huge ambition – the wAP ac LTE6 kit is an upgrade of our extremely cost-effective dual-band (2.4 / 5 GHz) home access point based on the popular weatherproof wAP form factor. Its new CAT6 LTE modem enables even greater download speed – up to 300 Mbps! CAT6 also enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside.wAP ac LTE6 kit has two Gigabit Ethernet ports – you can use the device as a wired router with LTE backup via the Micro SIM slot. Alternatively you can enjoy smooth wireless experience anywhere – indoors or outdoors. wAP ac LTE is designed to deliver strong and reliable connection in almost any situation and weather conditions. It can withstand temperatures from -30 C° to +60 C° and can be easily mounted on walls ceilings or poles.Mobile2G CategoryClass122G bands2 (1900MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz)3G CategoryR7 (21Mbps Downlinks 5.76Mbps Uplink) / R8 (42.2Mbps Downlink 5.76Mbps Uplink)3G bands1 (2100MHz) / 2 (1900MHz) / 5 (850MHz) / 8 (900MHz)LTE Category6 (300Mbit/s Downlink 50Mbit/s Uplink)LTE FDD bands1 (2100MHz) / 2 (1900MHz) / 3 (1800MHz) / 7 (2600MHz) / 8 (900 MHz) / 20 (800MHz) / 5 (850MHz) / 12 (700MHz) / 17 (700MHz) / 25 (1900MHz) / 26 (850MHz)LTE TDD bands38 (2600MHz) / 40 (2300MHz) / 39 (1900MHz) / 41n (2500MHz)
The wAP ac is a small weatherproof wireless access point for your mobile devices perfect for installation outside your house in the garden on your porch or anywhere else where you need a capable wireless connection. The new revision features 2x Gigabit Ethernet ports enhanced wireless antenna performance more RAM and a powerful quad-core CPU!Strong dual-chain dual-band 2.4/5 GHz wireless for concurrent coverage will solve most interference issues in a crowded environment. This is a must-have these days! You can use the 2.4 GHz channel for older devices and the 5 GHz channel for everything else since this frequency is less cluttered.The wAP ac is weatherproof and can be fixed to any external wall from the inside of the case – for extra security and less visible attachments. The bottom part can also be secured with a special anti-vandal screw which can only be opened by the owner.There is an opening in the back of the case allowing you to run the Ethernet cable directly behind the unit and through the wall. This way the wAP ac attracts less attention and blends into any environment.It looks unobtrusive and sleek available in two colors - black (RBwAPG-5HacD2HnD-BE) and white (RBwAPG-5HacD2HnD).
wAP LoRa8 kit – an out-of-the-box solution to use LoRaWAN gateway. This kit contains a pre-installed UDP packet forwarder to any public or private LoRa servers and an outdoor weatherproof wireless access point with 2.4 GHz WLAN interface and Ethernet port that could be used as a backend.This particular wAP form-factor has been tested in many other MikroTik products – it can deliver excellent and stable performance in almost any weather conditions.You can use the optional internal 2 dBi antenna or attach an external antenna. For extra network coverage we suggest adding MikroTik LoRa Antenna kit.wAP LoRa8 kit supports 863-870 MHz frequency used in European Union Russia India etc.Functional and non-intrusive design astonishing durability and great value – that is the wAP LoRa8 kit the long-awaited LoRa solution for LoRa enthusiasts of any level.LoRa are ready to work with “The Things Network” - the famous open source infrastructure that provides free LoRaWAN network coverage and has tons of apps for your needs. With the help of “The Things Network” you can get started with the Internet of things within a day. And it is easily upgradable to enterprise-grade network “The Things Industries”.Cattle tracking smart irrigation level monitors for liquids smart pulse sensors and thermostats smart parking and so on – the possibilities are endless. And the setup is so easy anyone can learn it. There is a large community of developers and enthusiasts all around the globe – you will never be alone with your questions and ideas regarding the LoRaWAN network. No need to reinvent the wheel – join “The Things Network” to save time and energy with smart solutions!
Mikrotik newest out-of-the-box solution for LoRa® technology. Like the previous wAP LR kits it contains a pre-installed UDP packet forwarder to any public or private LoRa® servers and an outdoor weatherproof wireless access point with 2.4 GHz WLAN interface and Ethernet port with PoE-in that could be used as a backend.Here’s the difference: this device works with the 2.4 GHz frequency for LoRa® as well. That means significantly higher bandwidth higher data rate and less air time. And because of the Chirp modulation technology it doesn’t interfere with the 2.4 GHz WLAN signal! A perfect solution for industrial setups with a high density of sensors.There is a built-in 2 dBi WLAN / 4.7 dBi LoRa® antenna but you can add an external antenna for extra coverage. Mikrotik suggests using the TOF-2400-8V-4 Omni antenna for best results.Mikrotik have decided to keep the classic wAP form-factor that has been tested in many other MikroTik products – it can deliver excellent and stable performance in almost any weather conditions. Functional and non-intrusive design astonishing durability and great value remain at the core of this design.The whole IoT community is exploring the 2.4 GHz LoRa® possibilities – join them and be among the first ones to benefit from the increased data rates.
The Wireless Wire Dish is a ground breaking solution which offers Fiber speed and quality on distances up to 1500 m for a fraction of the price!This amazing kit makes a secure AES encrypted 60 GHz wireless link that is not affected by the crowded WiFi spectrum offering a stable and fast link for distances of 1500 meters or more. Simply point the included devices at one another and power them on they are already preconfigured to connect automatically and will make a 2 Gb/s aggregate link. The box includes two LHGG-60ad devices that are already paired together powersupplies PoE injectors and mounting kits for both devices. The RBLHGG-60ad has an extremely capable CPU making it possible for wire speed throughput in nearly all packet sizes.
The most compact wireless 2 Gb/s aggregate link in the 1500 m range or more! Improved snow-resistant design is perfect for harsh weather environments. Cables can no longer limit you!Mikrotik team has gathered and taken into account your feedback to make a worthy successor of their popular Wireless Wire Dish. Now they are proud to present the best plug-and-play 60 GHz point-to-point link solution to date – the Wireless Wire nRAY. It is a kit of two pre-paired devices that make a secure AES encrypted wireless connection.It can easily cover a distance of 1500 meters and reach fiber-like speed and Mikrotik has made some serious structural improvements. With the latest antenna technologies this device is very compact but even more durable than its predecessors.The new form-factor has been designed with snowy areas in mind – you won’t have to worry about huge chunks of snow getting stuck and messing with the signal. Due to its size and shape the nRAY also attracts less unwanted attention. Using the special fine-tune adjustment screws a perfect alignment can be achieved.The 60 GHz frequency is unaffected by the crowded wireless spectrum so you can enjoy a smooth connection even in a busy urban environment. A powerful arm64 dual-core CPU running at 1 GHz ensures wire speed throughput in nearly all packet sizes. The included devices are preconfigured to connect automatically simply point them at one another and power them on! Mikrotik has included the power supplies PoE injectors and a handy precision mount for easier alignment - the solidMOUNT. It is an advanced pole mount metal adapter that allows adjustment both vertically and horizontally.
The Wireless Wire is a ground breaking solution which offers fiber speed and quality for a fraction of the price. This amazing kit replaces your Gigabit ethernet cable with two small devices that connect to each other over a 60 GHz wireless link.Simply point the included devices at one another and power them on it will make a 1 Gbit full duplex link to instantly replace your cable - this is why we call it the Wireless Wire! The Wireless Wire makes secure AES encrypted 60 GHz wireless link that is not affected by the crowded WiFi spectrum offering a stable and fast link for distances of 100 meters or more. The box includes two wAP60G devices that are already paired together a wall mounting kit straps for pole mounting and also a pair of table stands for using the devices indoors. The link will even work through most windows depending on their material. The box includes a wall mounting kit straps for pole mounting and also a pair of table stands for using the devices indoors Ethernet test resultsRBwAPG-60ad kitIPQ-4019 1G one port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)81.2986.1234.9962.21483.0759.3Bridging25 bridge filter rules81.2986.1227.7932.7231.9118.7Routingnone (fast path)81.2986.1234.9962.21489.5762.6Routing25 simple queues81.2986.1234.9962.2375.7192.4Routing25 ip filter rules81.2986.1177.9728.7180.192.2
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28
This unit is a direct upgrade of Mikrotik previous 10G SFP+ 10 km module: more functionality for the same price. Mikrotik has added 25G SFP28 support – so you can use one module in all your setups. Perfect for the CCR2004-1G-12S+2XS connectivity router and any other multiport devices.
