CCR1072-1G-8S+ is equipped with two redundant Hot Swap 12v 150W AC/DC power supplies - if one of them goes out of order second one will take over. Hot Swap 12v 150W AC/DC power supplies for CCR1072-1G-8S+ are now available for purchase separately. You can replace them on the go to ensure zero downtime no need to even restart the router
Hot-swap power supply for the CCR2004 — so you can replace the power supply without having to turn off or even restart the router. Zero downtime!CCR2004-16G-2S+ comes with two hot-swap dual redundant power supplies. If one of them goes out of order at some point the other one will take over. Then you can use this kit to replace the old power supply — and you don’t even have to restart the router!
Mikrotik is now offering a Hot Swap -48V DC telecom power supply (product code PW48V-12V150W) available to purchase separately for use with CCR1072. Simply remove one of the current power supplies and replace with the new PW48V-12V150W for -48V installations - simple and easy. You don't even need to turn off the device.
The newest addition to the MikroTik IoT product family – KNOT – is a truly universal device with exceptional connectivity options and protocol support. It is an IoT Gateway that uses Narrow Band and CAT-M technology. Because of the low cost low bandwidth cellular connection it is supported by countless mobile operators around the globe.KNOT can monitor onboard GPIOs convert Modbus protocol to TCP and even forward Bluetooth packets to TCP/IP network via HTTPS and MQTT. You can use the KNOT as a TCP bridge from wired Modbus sensors to send readings to a Modbus server. Yes the KNOT brings wireless connectivity to wired sensors such as electricity meters and relays. It could be used as a backup connection for the Ethernet or as a management channel for your network. NB/CAT-M monthly plan is much cheaper than LTE. Why spend extra money on bandwidth you don’t need? For example you can manage a KNOT-powered vending machine with temperature and liquid sensors with only a few megabytes per day!KNOT features so many protocol support and connectivity options: 2.4 GHz wireless Bluetooth 2x 100 Mbps Ethernet ports with PoE-in and PoE-out Micro-USB. Maximum convenience at the lowest cost! With the Bluetooth interface you can use the KNOT for asset tracking and telemetry based on Bluetooth advertisement packets. KNOT supports any BLE tag that sends advertisement data. iBeacon Eddystone or any other format. It has powerful filters for forwarding only relevant packets and ignoring others.KNOT is a great tool for most outdoor cabinet IoT applications as well. It comes with a DIN rail mount that allows easy integration with all kinds of setups: from agriculture and asset tracking to cold chain monitoring industrial manufacturing and so on.Module BG77Cat M1: LTE FDD B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B27/B28/B66/B85Cat NB2: LTE FDD B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B28/B66/B71/B85Region: GlobalGNSS (Optional): GPS/GLONASS/BeiDou/Galileo/QZSS
The Light Head Grid (LHG) is a compact and light wireless device with an integrated 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances. The grid design ensures protection against wind and the fact that the antenna element is built into the wireless unit means no loss on cables. We sell international version with working frequencies 5150MHz-5875MHz range.
LHG 60G - For use as 60GHz CPE in Point -to-Multipoint setups for connections up to 800m with a 60GHz Base Stations with Gigabit Ethernet port for speeds up to 1Gbps LHG 60G – a high-speed 60 GHz CPE point-to-multipoint unit perfect solution for crowded wireless spectrumNo need to share the frequency with your neighbors and lose valuable time – LHG 60G offers a simple and effective 60 GHz solution for wireless connection where the 2 GHz and 5GHz wireless space is crowded and unreliable. Connect up to eight of these units to a 60 GHz access point such as our wAP60G AP or wAP 60Gx3 AP and enjoy the smooth connection with data rate up to 1 Gbps.The effective point-to-point distance between two LHG 60G units is up to 1500 meters point-to-multipoint – up to 800 meters. The grid design ensures protection against wind it can withstand temperatures from -40 C° to +70 C°. The antenna element is built into the wireless unit – no loss on cables.LHG 60G is shipped with an Aim tool for easy precision alignment and strong metal LHGmount. Order it today and forget about wireless interference!
The LHG mount is a basic pole mount adapter for LHG series products.• Simple and low cost.• Supports all LHG series products including LHG XL.• Made from metal.• Package also includes a U-bolt and a K-58 mounting kit.
Antenna kit for LoRa® with a 6.5 dBi Omni antenna for 824-960 MHz 1 m long SMA cable and mechanical holder for quick and easy mast attachment. Antenna length 49 5 cm.The new kit offers significantly higher durability in a smaller package – without sacrificing performance. The improved cable durability and the added IP66 water resistance with protection against powerful jets make this kit an excellent choice for all kinds of marine and coastal projects.Mount this antenna on a 25-50 mm mast or on the wall and enjoy the superb coverage!
The MikroTik LtAP mini LTE kit (2024) designated as RB912R-2nD-LTm&EC200A is a compact highly robust wireless access point engineered for mobile connectivity in challenging environments. This device is specifically designed to deliver consistent and reliable internet access in vehicles making it an indispensable tool for continuous connectivity whether traveling through remote areas or urban centers. The MikroTik LtAP mini LTE kit is perfect for providing robust internet connectivity and GPS tracking capabilities in commercial vehicles emergency services and public transportation. It also serves well in stationary remote installations such as weather stations or remote surveillance systems where reliable internet access is critical. The LtAP mini is outfitted with the latest LTE technology supporting a broad spectrum of LTE bands including the pivotal B28 band. This enhancement ensures wider coverage and significantly improved signal reception which is critical in less accessible regions. The inclusion of two internal antennas equipped with u.FL connectors offers the flexibility to attach external LTE antennas thereby optimizing reception and expanding operational range. This device stands out with its dual SIM capability allowing users to switch between two cellular networks to maintain service continuity across different service areas. This feature is particularly valuable in regions where network coverage varies between providers.
The LtAP mini is a small waterproof wireless access point with integrated LTE antennas (with two u.fl pigtails) and miniPCI-e slot so you can use your own LTE modem of your choice. The LtAP mini also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging. The unit has several powering options: 9-30 V PoE-in by Ethernet port DC jack and microUSB. LtAP mini has a special enclosure with with a wall mounting kit two SIM slots to alternate between cellular providers and integrated GPS support making this a perfect device for use in moving vehicles like cars buses or trains. Use the built in GPS module to track the location of your vehicle in real time we have even provided a simple tracking application example in the RouterOS documentation to help you start development of your platform. External GPS antenna is available for ordering separately (not included product code GPSANT). LtAP mini (RB912R-2nD-LTm) is shipped without LTE card installed (empty miniPCI-e slot) so you can use your own LTE card.
The new sector mANT antennas are the perfect companion for the BaseBox NetBox NetMetal or any other outdoor wireless device. The mANT is a dual-polarization 15dBi 120 degree beamwidth antenna with two RP-SMA connectors. It is compatible with the SXT type mount so you can use it with our durable and adjustable QuickMount systems. It comes with quickMOUNT PRO.
The mANT LTE is an omnidirectional antenna specifically designed for LTE frequencies. It is an excellent companion to our LTE devices such as the wAP LTE and LtAP series.The antenna has a 5 dBi gain improving your connection in the areas with inadequate LTE service coverage allowing you to increase your connection speed.
mANT30 is a professional class 5 GHz 30dBi dish antenna built to the highest industry standards. Built to seamlessly accomodate Mikrotik Basebox series products but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable. The antenna comes packaged with all necessary accessories and cables. Note: Basebox wireless device pictured for illustrative purposes. It is not included.
mANT30 is a professional class 5 GHz 30dBi dish antenna built to the highest industry standards. Built to seamlessly accomodate Mikrotik Basebox series products but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable. The antenna comes packaged with all necessary accessories and cables. Note: Basebox wireless device pictured for illustrative purposes. It is not included.
mANT30 is a professional class 5 GHz 30dBi dish antenna built to the highest industry standards. Built to seamlessly accomodate Mikrotik Basebox series products but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable. The antenna comes packaged with all necessary accessories and cables. Note: Basebox wireless device pictured for illustrative purposes. It is not included.
mANTBox 2 12s is long range 12dbi 120 degrees integrated Base Station for 2.4 GHz. The mANTBox is based on our new mANT sector antennas but also has a wireless router built right in. Powered by the RB911 device the mANTBox comes ready to use with everything included. The device uses a high speed 600 MHz CPU comes with the Gigabit Ethernet port and has a built in 802.11 b/g/n wireless device with up to 30 dBm output power.
The mAP lite is Mikrotik smallest wireless access point. It is barely larger than a matchbox we even had to use a special Ethernet port to match it’s slim profile. You can carry it anywhere: use as a travel router to extend that hotel internet to all your devices or as a client device to improve your laptop signal range the tiny mAP lite will be always with you. It comes with a built-in magnet so you can attach it to any ferrous surface or if those are not available a metallic plate with an adhesive back is also included. It can also serve as a simple configuration tool for your servers if there is no ethernet on your mobile device plus it neatly attaches to the rack with it’s magnet. The mAP lite is a dual chain 802.11 b/g/n device and operates in 2GHz.
The mAP is a tiny size wireless Access Point with full RouterOS capabilities. It is very portable since it accepts power from a wide variety of sources - USB Passive or Active PoE (802.3af and 802.3at) and power jack. In addition to using this device as a small and portable AP it also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device for example you can connect a SXT CPE device to it. • PoE in 10-57V • Built in 2GHz AP • microUSB for a 3G/4G modem or for power input • Station or AP mode wireless • Any type PoE input 802.3af and 802.3at • Passive PoE output (same as input voltage)
Tootekood: RBMetalG-52SHPacnGTIN: 4752224004338Groove & Metal
The Metal is a completely waterproof and rugged outdoor wireless device with a super high output power.Now with 802.11ac support a Gigabit Ethernet port and a selectable wireless band (2.4GHz or 5GHz up to 80 MHz wide channel). The new Gigabit port will help you utilize the full benefit of 802.11ac high speed wireless.The Metal 52 ac supports 2.4GHz 5GHz and all the legacy wireless modes as well (802.11 b/g/n for 2.4GHz and 802.11 ac/n/a for 5GHz).Fully sealed industrial design metal case powered by RouterBOARD and RouterOS. With 1300mW of output power - to reach the last mile in any conditions. The Metal comes with an AP software license so you can attach your favorite antenna to use it as an AP to make wireless point-to-point links or as a CPE- whatever you prefer!The Metal 52 ac includes a Dual Band 2.4/5GHz Omni directional antenna (6dBi 2.4GHz 8dBi 5GHz) so you can use the unit right out of the box or use your own antenna. Wireless specifications 5 GHz Transmit power (dBm)Receive SensitivityTransmit power (mW)6MBit/s31-93125954MBit/s27-78501MCS030-931000MCS726-74398MCS922-691582.4 GHz Transmit power (dBm)Receive SensitivityTransmit power (mW)1MBit/s31-97125911MBit/s31-9112596MBit/s31-93125954MBit/s28-77631MCS031-931259MCS727-72501
netFiber 9 is a powerful outdoor switch with SFP SFP+ and Gigabit Ethernet. It features a powerful ARM v7 CPU 256 MB of RAM 4x 10G SFP+ ports and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in so you don’t have to rely on the DC jack for powering in tight hard-to-reach spots. There is a console port followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why Mikrotik designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet.There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws so you can attach the netFiber to a pole wall or mast right away.netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports a powerful CPU and a rugged case netFiber 9 is a real bargain that will make your network management so much easier!
netPower 16PAn outdoor 18 port switch with 16 Gigabit PoE-out ports and 2 SFP+. Power all your access points anywhere!Powering a bunch of access points or IP cameras and a few uplinks on a tower has never been easier. netPower 16P has 16 Gigabit Ethernet ports with PoE-out and two SFP+ ports for 10G fiber uplinks.Its sturdy and compact outdoor enclosure allows the switch to be mounted in all kinds of environments – from damp attics and shafts to towers masts and poles with hose clamps.netPower 16P has a non-blocking throughput of 36 Gbps switching capacity of 72 Gbps and forwarding rate of 53.6 Mpps.* Power supply is NOT included with the product. You are welcome to use your preferred power option like battery pack etc. Compatible also with MikroTik power supplies 24HPOW 48POW and 48V2A96W
With netPower Lite 7R switch you can forget about expensive GPON base stations and optical splitters. This switch is a part ofr GPEN concept – aimed to bring the speed and versatility of fiber networking while using the advantages of Ethernet. It is an easy to deploy low-cost way for any ISP to deliver the Internet to individual apartments.With this switch you won’t have to worry about power issues as there are many options. netPower Lite 7R has 7 reverse PoE ports. Depending on your setup netPower can draw the necessary power even from a single client! Ethernet port 8 can power other PoE capable devices with the same voltage as applied to the unit. There is also a DC jack and a 2-pin terminal for alternative powering.The outdoor enclosure allows you to install this switch in all kinds of environments – from damp attics to elevator shafts and different poles with hose clamps. netPower Lite 7R has a non-blocking throughput of 28 Gbps switching capacity of 56 Gbps and forwarding rate of 41.7 Mpps.The power supply is NOT included with the product- must be purchased separately.
RayAIM-DH1 is an alignment and aiming attachment for the nRAY. Use it to attach a scope of your choice for even greater precision and easier installation of the Wireless Wire nRAY.
OmniTik 5 PoE ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU 128MB RAM high power 1 300mW 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE) and comes with a new design weatherproof outdoor enclosure two integrated 7.5dBi 5GHz omni antennas a power supply a PoE injector and a mounting kit. It also supports passive or standard 802.3at/af PoE input/output (12v-57v). Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power 48V devices (like IP camera) if 48V input is used. OmniTik 5 PoE ac (International) supports 5150MHz-5875MHz range.
±48 V DC telecom Open Frame Power supply with 12 V 7 A output for use with Cloud Core Routers since revision "r2" or the new CCR2004-1G-12S+2XS and CRS326-24S+2Q+RM. Simply remove one of the current power supplies and replace with the new PW48V-12V85W for ±48 V installations. Although made specifically for -48V telecom power the supported input range is from 36V to 57V. Note: To use positive terminal must be 36 to 57V higher potential than negative terminal (eg. if negative terminal is -48 V the positive must be -12 to +9 V). Send purchase questions
UP1302C-12UP1302C-12 is a replacement 12V 10.8A power unit for CRS326-24S+2Q+RM and CCR1036 series (only for new r2 revisions with dual power supplies) as well as new CCR2116-12G-4S+.
Outdoor AC/DC power supply units for the MikroTik netPower product line. Built for situations when your outdoor switches need that extra juice.MTP250-53V47-OD can output 53V 250W while the MTP250-26V94-OD works with a 26V 250W output. Both power supplies come in a sturdy IP67 enclosure with extra protection from dust and moisture.The voltage will depend on your setup – take a look at the “DC jack input Voltage” in the Power input specifications of the desired devices. In our example the home access points are designed for 12-30 V power supplies so we are using the MTP250-26V94-OD. If you have a setup demanding higher voltage – like a net of PTZ security cameras you could use the MTP250-53V47-OD instead. Always check the necessary voltage before powering your devices!
Outdoor AC/DC power supply units for the MikroTik netPower product line. Built for situations when your outdoor switches need that extra juice.MTP250-53V47-OD can output 53V 250W while the MTP250-26V94-OD works with a 26V 250W output. Both power supplies come in a sturdy IP67 enclosure with extra protection from dust and moisture.The voltage will depend on your setup – take a look at the “DC jack input Voltage” in the Power input specifications of the desired devices. In our example the home access points are designed for 12-30 V power supplies so we are using the MTP250-26V94-OD. If you have a setup demanding higher voltage – like a net of PTZ security cameras you could use the MTP250-53V47-OD instead. Always check the necessary voltage before powering your devices!
Features Efficiency Over 75% Over-Voltage Protective Installation Short-circuit Protective Installation Protection Type: Auto-Recover Operating Temperature 0C~+40C Specifications Output Voltage 24 V Output Rating 2A Input Voltage AC 100~240V Input Frequency 50~60Hz Operating Temperature 0C~+40C Storage Temperature -20C~+85C
