The RAM-B-174U-A consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, short length double socket arm and diamond plate for mounting to RAM device cradles or anything with an AMPs hole pattern. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows you to move the mount to your optimum viewing position.
The RAM-B-174-A-UN7 consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, short length double socket arm and universal X-Grip® cell phone cradle. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows you to move the X-Grip® mount to your optimum viewing position. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
The RAM-B-174-A-UN7 consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, short length double socket arm and universal X-Grip® cell phone cradle. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows you to move the X-Grip® mount to your optimum viewing position. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
The RAM-B-174-UN7U consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, double socket arm and universal X-Grip® cell phone cradle. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows you to move the X-Grip® mount to your optimum viewing position. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
<div>The RAM-B-174U consists of a 1" diameter rubber ball, double socket arm, hardware for mounting to both brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows you to move the mount to your optimum viewing position.</div><div><br></div>
The RAM-B-149Z-GOP1U consists of a zinc coated u-bolt base, standard size double socket arm and 1" diameter ball with custom GoPro® Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. The included composite rail adapter can narrow the rail to a minimum width of 0.5". The GoPro® Hero adapter attaches directly to the underside of the camera, replacing the factory mounting bracket.
The RAM-B-103-C-238U consists of a diamond base and LONG double socket arm that will accept 1" ball bases. The diamond base measures 2.43" x 1.31" and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position.
The RAM-B-103-A-238U consists of a short length B size double socket arm with a 2.43" x 1.31" diamond late with the 2 hole universal AMPS hole pattern.
The RAM-101U-271-12 consists of a double socket arm, a 2.5" diameter round base, and a clamping base compatible with rails from 1.25" and 1.875" in diameter
The RAM-103U consists of the 1.5" diameter ball and socket system with one open socket end. This mount is designed to be used with any of the RAM mounting bases or cradles with a 1.5" diameter rubber ball. The round base has a 1.5" diameter rubber ball connected at right angles to a 2.5" diameter base. The plate has pre-drilled holes in the base, including the universal AMPS hole pattern.
UNPKD RAM MOUNT W/ 1 RAM-202 2 1/2" DIA. AND LONG ARM
Tootekood: RAM-103U-DGTIN: 793442011313RAM Mounts
The RAM-103U-D consists of the 1.5" C size diameter ball and socket system with one open socket end; RAM-201U-D socket arm is long length at 9.125" end to end with a 8" socket-to-socket length. This mount is designed to be used with any of the C size RAM® Mount bases or cradles with a 1.5" diameter rubber ball. The RAM-202U RAM® Round Plate Ball Base features industry standard AMPS hole pattern with 2.5" diameter base and can be used as an adapter to attach a holder, or a mounting drill-down base.
The RAM-103-238U consists of the 1.5" C size diameter ball and socket system with one open socket end; RAM-201U socket arm is medium length at 5.69" end to end with 4.66" socket-to-socket length. This mount is designed to be used with any of the C size RAM® Mount bases or cradles with a 1.5" diameter rubber ball. The RAM-238U RAM® Diamond Ball Base features industry standard AMPS 2-hole pattern and can be used as an adapter to attach a holder, or a mounting drill-down base.
<div>This RAM-103U-B-2461 consists of a 1.5" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern and SHORT length double socket arm. The rubber ball is positioned 0.88" from the center of one edge. The double socket arm will attach to all RAM 1.5" dia. ball bases.</div><div><br></div>
The RAM-103-238U consists of a diamond base and standard length double socket arm that will accept 1" ball bases. The diamond base measures 2.43" x 1.31" and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position.
The RAM-101U consists of a 6 inch C size 1.5" double socket arm and two 2.5" diameter round ball bases that contain the universal AMPS hole pattern. The ball and socket system provides shock and vibration damping, and allows for near-infinite adjustability to achieve an ideal viewing and operating angle of your device.
The RAM-101U-235 consists of a 6 inch double socket arm, one round 2.5" diameter round base with the universal AMPS hole pattern and stainless steel double u-bolt base that will fit pipes from 1" to 1.25" in diameter. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
<div>Your motorcycle rides on rubber tires for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration. With RAM products, it's all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you're done. After that, a world of mounting possibilities just opened up.</div><div><br></div>
The new RAM Multi-Pad™ is the perfect product to keep your busy life organized. Easily mounted in a variety of locations and ideal for your car, truck, or plane, the RAM Multi-Pad™ has many features you'd expect and others that will surprise you. With RAM in the name, you know the RAM Multi-Pad™ can be easily attached to a wide variety of RAM mounting solutions. With several mounting points and integrated magnets for holding your ferrous metal pen securely without the need for clips, the RAM Multi-Pad™ is ready to get to work for you. Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
Use your Apple or Samsung tablet with OtterBox uniVERSE case in field-based enterprise and government use cases with the RAM® Mounts uniVERSE Adapter. This adapter connects to the back of the uniVERSE case using four screws, enabling efficient use in vehicles or with the RAM® Hand-Stand™. Designed for enterprise use, the uniVERSE Adapter is built to excel in fleet vehicles, commercial aviation, forklifts and more.
<div>The RAM® Quick Release Vehicle Mount Adapter snaps onto the RAM-HOL-OT3BU. Once connected, you can attach any Apple or Samsung tablet with Otterbox uniVERSE case to any RAM® Diamond Base with Ball using the cross-section of the AMPs hole pattern. This allows you to use your iPad in its uniVERSE case with a broad selection of RAM® vehicle mounts designed for fleet vehicles, commercial aviation, forklifts and more.</div><div><br></div>
The RAM-316-1-2461U is a RAM®Pod™I universal floor mount with an 18" long aluminum rod that can be bent into your desired shape and a 75mm VESA plate on top. This mount can be installed into a vehicle using one of the factory provided bolts on the front of the passenger seat. The flexible aluminum rod is stiff but can be bent into your desired shape so you can position your device in your prefered location.
<span style="font-size: medium; font-weight: bold;">RAM® Pod™ III Swing Arm Laptop Mount</span><div><span style="font-size: medium;"><br></span></div><div><span style="font-size: medium;">RAM-316-3SW1U koosneb RAM POD III No-Drill™ sõidukialusest, kolmest jäigast alumiiniumvarda jalast, põrkmehhanismist pöördehoovast ja RAM Tough-Tray™-st. Kinnituse põhi ühendub teie istme siiniga, ilma et oleks vaja puurimist. Jäigad alumiiniumvarda jalgu saab painutada, et paigutada seade selle optimaalsesse vaatamiskohta. Kinnitus on konstrueeritud RAM-i 1,5-tollise läbimõõduga patenteeritud kummist kuuli- ja pesasüsteemiga, millel on reguleerimispunktid kahe pesa varre mõlemas otsas; see võimaldab peaaegu lõpmatut reguleerimist ja täiuslikke vaatenurki.</span></div>
