• For sharpening circular, felling and gang saws with fine teething and bandsaws<br>• Often used in the engineering industry as lathe and deburring files, polishing and for draw filing<br>• Shape: parallel, thin<br>• Type of cut: 1 = bastard<br>• Surfaces and edges single cut, 1 round edge<br>• Industry pack unhandled
• For filing narrow grooves and passages, etc.<br>• Particularly well-suited to filing cuts on keys<br>• Shape: edges tapered to a point, surfaces parallel<br>• Type of cut: 1 = bastard, 2 = second, 3 = smooth<br>• Surfaces double cut, edge single cut<br>• For filing narrow grooves<br>• Surfaces double cut, edge single cut, edges tapered towards the tip<br>• Industry pack unhandled
• Fast, safe and simple tester for quick and accurate battery and system test diagnosis<br>• Due to its patented “Single Load, Dynamic Resistance" technology it is able to deliver the most accurate in-vehicle test results, reflecting the true condition of the tested battery<br>• Suitable for testing 12V Start&Stop batteries<br>• Capacity<br>• - 6V and 12V standard batteries<br>• - 12V and 24V charging/starting systems<br>• - Traditional liquid, VRLA (AGM flat plate and spiral / GEL) and Start&Stop EFB and AGM<br>• - Working amperage range (SAE): 40 - 2,000 CCA<br>• - Voltmeter range: 1.5V - 30V<br>• - Complies with battery rating system SAE, DIN, EN, IEC and JIS<br>• Test results<br>• - GOOD & PASS<br>• - GOOD & RECHARGE<br>• - RECHARGE & RETEST<br>• - BAD & REPLACE<br>• - BAD CELL & REPLACE<br>• - Charge State and State of Health in Percentage<br>• Backlit LED display with 4 lines for easy reading even in dim or dark areas<br>• Insulated clamps with 35 mm opening width<br>• It is covered by a rubber protective case<br>• User interface in English, German, French, Spanish, Italian and Portuguese<br>• Supplied in a sturdy plastic case with 6 AA batteries and printed user manual<br>• CE certified
• Fast, safe and simple tester for quick and accurate battery and system test diagnosis<br>• Due to its patented “Single Load, Dynamic Resistance" technology it is able to deliver the most accurate in-vehicle test results, reflecting the true condition of the tested battery<br>• Suitable for testing 12V Start&Stop batteries<br>• Equipped with a thermal printer that it is a useful option for pre and post battery testing<br>• Capacity<br>• - 6V and 12V standard batteries<br>• - 12V and 24V charging/starting systems<br>• - Traditional liquid, VRLA (AGM flat plate and spiral / GEL) and Start&Stop EFB and AGM<br>• - Working amperage range (SAE): 40 - 2,000 CCA<br>• - Voltmeter range: 1.5V - 30V<br>• - Complies with battery rating system SAE, DIN, EN, IEC and JIS<br>• Test results<br>• - GOOD & PASS<br>• - GOOD & RECHARGE<br>• - RECHARGE & RETEST<br>• - BAD & REPLACE<br>• - BAD CELL & REPLACE<br>• - Charge State and State of Health in Percentage<br>• Backlit LED display with 2 lines for easy reading even in dim or dark areas<br>• Insulated clamps with 35 mm opening width<br>• It is covered by a rubber protective case<br>• User interface in English, German, French, Spanish, Italian and Portuguese<br>• Supplied in a sturdy plastic case with protective foam, including 6 AA batteries, paper roll, software CD and printed user manual<br>• CE certified
<p><span style="background-color:rgb(255,255,255);color:rgb(51,51,51);">See 6,0Ah aku on SAS+ALL-seeria akutööriistade toiteks mõeldud tipptoode. Aku on valmistatud liitium-ioontehnoloogiat kasutades, mis võimaldab akut igal ajal laadida ilma mäluefektita. Kolm aku korpusel asuvat valgusdioodi teavitavad meid aku hetkeseisust (100% laadimine).</span></p><p>Laadimisaeg:</p><p>DED7038A: puudub</p><p>DED7038: ca. 170 min</p><p>DED7038V: ca 170 min.</p><p>DED7039: umbes 90 min</p><p>DED7039V: umbes 90 min.</p><p>DED6939: ca 50 min</p><p><strong>Hoiatus: aku ei ühildu: DED6981, DED7005, DED7175, DED7185H, DED7197V, DED7198, DED7199</strong></p><p style="margin-left:0px;"> </p>
• Extra thin wall heavy duty impact sockets<br>• Ideal for working on wheels and platforms<br>• Drive: 1"<br>• Black phosphate finish<br>• High performance alloy steel<br>• For maximum safety, always use clamping springs (1” 19-70 mm ref. K560F-7, 1” 75-80 mm ref. K560F-8, 1” 95-120 mm ref. K560F-9)
• Includes 6 screwdrivers<br>• 0.5 x 3.0 x 75, 0.8 x 4.0 x 100, 1.0 x 5.5 x 125, 1.2 x 6.5 x 125, PZ1 x 100, PZ2 x 125<br>• Black oxide tip for higher accuracy<br>• Two-component handle with vertical grooves and large soft-grip area for comfortable grip and high torque transfer<br>• Handle made with over 75% rubber<br>• Anti-slip surface<br>• Permanent symbol and markings on the handle for quick identification of the tip<br>• Integrated hanging hole<br>• Chrome plated blade for high protection against corrosion, long life tool<br>• High performance steel blade<br>• In cardboard box
• Made of stainless steel 304<br>• Fully opening stainless steel drawers with Lock&Go latching system<br>• Strong and secure round locking system protects the tool trolley against theft<br>• Safe and smart Lock&Go system prevents the stainless steel drawers from opening when tool trolley moves<br>• Rubber wheels ensure maximum stability, making the trolley easy to manoeuvre, even on irregular surfaces<br>• Fully opening stainless steel drawers equipped with ball-bearing sliders that glide very smoothly and have a capacity up to 30 kg<br>• Double-wall reinforced stainless steel frame with extra welding points<br>• Smooth and silent rubber wheels
• 7 drawer trolley<br>• Lock & Go! latching system prevents drawers from opening when the trolley is being moved<br>• Fully opening drawers with aluminium trims<br>• Scratchproof powder coating<br>• Double walled case : if the outside wall is damaged in a collision, the double walled case ensures that the drawers will always open<br>• Solid steel construction : the double walled case is strengthened with strategicaly positioned welding points<br>• Anti-slip rubber worktop<br>• A solid handle that can be fixed in both side of the trolley<br>• Strong and secure round locking system protects the trolley against theft<br>• Noiseless rubber wheels 150x50 mm with 2 brakes ensure maximum stability : 2 fixed and 2 swivel with brake<br>• Available in different colours<br>• Add a variety of accessories to the side panels
• 7 drawer trolley<br>• Lock & Go! latching system prevents drawers from opening when the trolley is being moved<br>• Fully opening drawers with aluminium trims<br>• Scratchproof powder coating<br>• Double walled case : if the outside wall is damaged in a collision, the double walled case ensures that the drawers will always open<br>• Solid steel construction : the double walled case is strengthened with strategicaly positioned welding points<br>• Anti-slip rubber worktop<br>• A solid handle that can be fixed in both side of the trolley<br>• Strong and secure round locking system protects the trolley against theft<br>• Noiseless rubber wheels 150x50 mm with 2 brakes ensure maximum stability : 2 fixed and 2 swivel with brake<br>• Available in different colours<br>• Add a variety of accessories to the side panels
• 7 drawer trolley<br>• Lock & Go! latching system prevents drawers from opening when the trolley is being moved<br>• Fully opening drawers with aluminium trims<br>• Scratchproof powder coating<br>• Double walled case : if the outside wall is damaged in a collision, the double walled case ensures that the drawers will always open<br>• Solid steel construction : the double walled case is strengthened with strategicaly positioned welding points<br>• Anti-slip rubber worktop<br>• A solid handle that can be fixed in both side of the trolley<br>• Strong and secure round locking system protects the trolley against theft<br>• Noiseless rubber wheels 150x50 mm with 2 brakes ensure maximum stability : 2 fixed and 2 swivel with brake<br>• Available in different colours<br>• Add a variety of accessories to the side panels
• 7 drawer trolley<br>• Lock & Go! latching system prevents drawers from opening when the trolley is being moved<br>• Fully opening drawers with aluminium trims<br>• Scratchproof powder coating<br>• Double walled case : if the outside wall is damaged in a collision, the double walled case ensures that the drawers will always open<br>• Solid steel construction : the double walled case is strengthened with strategicaly positioned welding points<br>• Anti-slip rubber worktop<br>• A solid handle that can be fixed in both side of the trolley<br>• Strong and secure round locking system protects the trolley against theft<br>• Noiseless rubber wheels 150x50 mm with 2 brakes ensure maximum stability : 2 fixed and 2 swivel with brake<br>• Available in different colours<br>• Add a variety of accessories to the side panels
• For sharpening saws with fine cross teething<br>• Shape: triangular, untanged, edges tapered towards both ends<br>• Surfaces and edges single cut from both ends towards the centre<br>• Type of cut: 2 = second<br>• Wood handle included<br>• Industry pack with wooden handle
• For sharpening all types of saw with fine universal teething<br>• Shape: Triangular, with edges tapered towards tip<br>• Type of cut: 2 = Second<br>• Surfaces and edges single cut<br>• Industry pack unhandled
• For sharpening saws with universal teething and teeth at 60° angle<br>• Shape: Triangular, with edges tapered towards tip<br>• Type of cut: 2 = Second<br>• Surfaces and edges single cut<br>• Industry pack unhandled
• For sharpening all types of saw with fine universal teething<br>• Shape: Triangular, with edges tapered towards tip<br>• Type of cut: 2 = Second<br>• Surfaces triangular single cut, edges single cut tapering towards the tip<br>• Industry pack unhandled
• For sharpening power hacksaw blades<br>• Shape: triangular, with round edges tapering towards the tip<br>• Surfaces and edges single cut<br>• Type of cut: 2 = second<br>• Industry pack unhandled
• Extra thin wall heavy duty impact sockets<br>• Ideal for working on wheels and platforms<br>• Drive: 1"<br>• Black phosphate finish<br>• High performance alloy steel<br>• For maximum safety, always use clamping springs (1” 19-70 mm ref. K560F-7, 1” 75-80 mm ref. K560F-8, 1” 95-120 mm ref. K560F-9)
• Extra thin wall heavy duty impact sockets<br>• Ideal for working on wheels and platforms<br>• Drive: 1"<br>• Black phosphate finish<br>• High performance alloy steel<br>• For maximum safety, always use clamping springs (1” 19-70 mm ref. K560F-7, 1” 75-80 mm ref. K560F-8, 1” 95-120 mm ref. K560F-9)
• Includes 7 pieces of insulated VDE screwdrivers<br>• For work on live equipment, up to 1000 V, high quality blade insulation moulded directly onto the blade<br>• 0.4 x 2.5 x 75, 0.8 x 4 x 100, 1.0 x 5.5 x 125, 1.2 x 6.5 x 150, PZ0 x 75 mm, PZ1 x 80, PZ2 x 100<br>• Black oxide tip for higher accuracy<br>• Two-component handle with vertical grooves and large soft-grip area for comfortable grip and high torque transfer<br>• Handle made with over 75% rubber<br>• Anti-slip surface<br>• Permanent symbol and markings on the handle for quick identification of the tip<br>• Integrated hanging hole<br>• Blade made of high-performance alloy steel<br>• Individually inspected and manufactured according to IEC 60900, tested in a water bath at 10000 V<br>• In cardboard box
Tootekood: BE-8573Otsaku kruvikeerajad ja komplektid
• Includes ERGO™ handle with 1/4" hexagon drive bit holder for blades or bits and interchangeable blades<br>• 100 mm blades: T10, T15, T20, T25, T27, T30, T40<br>• Lock-in type system for easy and safety lock, magnetic, blades stays caught until the release is driven<br>• With strong permanent magnet<br>• Screwdriver developed according to the scientific ERGO™ process<br>• Three-component handle for maximum user comfort, soft material with ridged surface provides superior grip and greater force transmission<br>• Maximum comfort with minimum effort thanks to an ergonomic design<br>• Colour-coded handle<br>• Flat face to prevent rolling away<br>• Integrated hanging hole<br>• Blades length 100 mm and hexagon profile, phosphate finish<br>• Presented in a pouch and plastic tube with hanging hole
• Verifies proper operation of the common rail diesel injection system<br>• Checks the fluid return [back leakage], detecting a faulty injector by having a higher level of diesel in the fuel chambers<br>• Very quick and easy to fit<br>• Graduated polycarbonate fuel chambers make it easy to read and compare the cylinders<br>• Can be used on vehicle engines up to 8 cylinders<br>• Fuel resistant and very flexible silicone hoses<br>• Set contents<br>• Main device [with 8 cylinders]<br>• 8 injector connectors per injector make [Bosch, Delphi, Denso, Siemens]<br>• Bottle content: 30ml with a mark every 3.75ml<br>• All connectors are also available as spare parts<br>• Supplied in a blow moulded case, in foam inlay for better tool management
• Verifies proper operation of the common rail diesel injection system<br>• Checks the fluid return [back leakage], detecting a faulty injector by having a higher level of diesel in the fuel chambers<br>• Very quick and easy to fit<br>• Graduated polycarbonate fuel chambers make it easy to read and compare the cylinders<br>• Can be used on vehicle engines up to 8 cylinders<br>• Fuel resistant and very flexible silicone hoses<br>• Set contents<br>• Main device [with 8 cylinders]<br>• 8 injector connectors per injector make [Bosch, Delphi, Denso, Siemens]<br>• Bottle content: 30ml with a mark every 3.75ml<br>• All connectors are also available as spare parts<br>• Supplied in a blow moulded case, in foam inlay for better tool management
• Verifies proper operation of the common rail diesel injection system<br>• Checks the fluid return [back leakage], detecting a faulty injector by having a higher level of diesel in the fuel chambers<br>• Very quick and easy to fit<br>• Graduated polycarbonate fuel chambers make it easy to read and compare the cylinders<br>• Can be used on vehicle engines up to 8 cylinders<br>• Fuel resistant and very flexible silicone hoses<br>• Set contents<br>• Main device [with 8 cylinders]<br>• 8 injector connectors per injector make [Bosch, Delphi, Denso, Siemens]<br>• Bottle content: 30ml with a mark every 3.75ml<br>• All connectors are also available as spare parts<br>• Supplied in a blow moulded case, in foam inlay for better tool management
• 8 drawer trolley<br>• Lock & Go! latching system prevents drawers from opening when the trolley is being moved<br>• Fully opening drawers with aluminium trims<br>• Scratchproof powder coating<br>• Double walled case : if the outside wall is damaged in a collision, the double walled case ensures that the drawers will always open<br>• Solid steel construction : the double walled case is strengthened with strategicaly positioned welding points<br>• Anti-slip rubber worktop<br>• A solid handle that can be fixed in both side of the trolley<br>• Strong and secure round locking system protects the trolley against theft<br>• Noiseless rubber wheels 150x50 mm with 2 brakes ensure maximum stability : 2 fixed and 2 swivel with brake<br>• Drawers internal dimensions:<br>• (2 x) 881 x 445 x 53 mm<br>• (3 x) 881 x 445 x 118 mm<br>• (1 x) 881 x 445 x 184 mm<br>• Available in different colours
• 8 drawer trolley<br>• Lock & Go! latching system prevents drawers from opening when the trolley is being moved<br>• Fully opening drawers with aluminium trims<br>• Scratchproof powder coating<br>• Double walled case : if the outside wall is damaged in a collision, the double walled case ensures that the drawers will always open<br>• Solid steel construction : the double walled case is strengthened with strategicaly positioned welding points<br>• Anti-slip rubber worktop<br>• A solid handle that can be fixed in both side of the trolley<br>• Strong and secure round locking system protects the trolley against theft<br>• Noiseless rubber wheels 150x50 mm with 2 brakes ensure maximum stability : 2 fixed and 2 swivel with brake<br>• Drawers internal dimensions:<br>• (2 x) 881 x 445 x 53 mm<br>• (3 x) 881 x 445 x 118 mm<br>• (1 x) 881 x 445 x 184 mm<br>• Available in different colours
• 8 drawer trolley<br>• Lock & Go! latching system prevents drawers from opening when the trolley is being moved<br>• Fully opening drawers with aluminium trims<br>• Scratchproof powder coating<br>• Double walled case : if the outside wall is damaged in a collision, the double walled case ensures that the drawers will always open<br>• Solid steel construction : the double walled case is strengthened with strategicaly positioned welding points<br>• Anti-slip rubber worktop<br>• A solid handle that can be fixed in both side of the trolley<br>• Strong and secure round locking system protects the trolley against theft<br>• Noiseless rubber wheels 150x50 mm with 2 brakes ensure maximum stability : 2 fixed and 2 swivel with brake<br>• Drawers internal dimensions:<br>• (2 x) 881 x 445 x 53 mm<br>• (3 x) 881 x 445 x 118 mm<br>• (1 x) 881 x 445 x 184 mm<br>• Available in different colours
• 8 drawer trolley<br>• Lock & Go! latching system prevents drawers from opening when the trolley is being moved<br>• Fully opening drawers with aluminium trims<br>• Scratchproof powder coating<br>• Double walled case : if the outside wall is damaged in a collision, the double walled case ensures that the drawers will always open<br>• Solid steel construction : the double walled case is strengthened with strategicaly positioned welding points<br>• Anti-slip rubber worktop<br>• A solid handle that can be fixed in both side of the trolley<br>• Strong and secure round locking system protects the trolley against theft<br>• Noiseless rubber wheels 150x50 mm with 2 brakes ensure maximum stability : 2 fixed and 2 swivel with brake<br>• Drawers internal dimensions:<br>• (2 x) 881 x 445 x 53 mm<br>• (3 x) 881 x 445 x 118 mm<br>• (1 x) 881 x 445 x 184 mm<br>• Available in different colours
• Verifies proper operation of the common rail diesel injection system<br>• Checks the fluid return [back leakage], detecting a faulty injector by having a higher level of diesel in the fuel chambers<br>• Very quick and easy to fit<br>• Graduated polycarbonate fuel chambers make it easy to read and compare the cylinders<br>• Can be used on vehicle engines up to 8 cylinders<br>• Fuel resistant and very flexible silicone hoses<br>• Set contents<br>• Main device [with 8 cylinders]<br>• 8 injector connectors per injector make [Bosch, Delphi, Denso, Siemens]<br>• Bottle content: 30ml with a mark every 3.75ml<br>• All connectors are also available as spare parts<br>• Supplied in a blow moulded case, in foam inlay for better tool management
• File handle developed according to the scientific ERGO™ process<br>• Maximum comfort with minimum effort thanks to an ergonomic design<br>• Comfortable two-component handle giving an excellent grip<br>• For sharpening saws with fine cross tooting<br>• Triangular, untanged, edges tapering towards both ends<br>• Surfaces and edges single cut from both ends towards the centre<br>• Type of cut: 2 = second<br>• Single pack carded
• The shape of the teeth makes the diagonal file especially suitable for soft steel, stainless-steel, light metal alloys and hard plastic<br>• High material removal rate from the specially milled teeth<br>• Shape: edges and surfaces parallel<br>• Surfaces diagonally milled with S-pattern chip breaker teeth, one edge single cut<br>• Type of cut: 2 = second<br>• Industry pack unhandled
• For sharpening saws with fine cross teething<br>• Shape: triangular, untanged, edges tapered towards both ends<br>• Surfaces and edges single cut from both ends towards the centre<br>• Type of cut: 2 = second<br>• Wood handle included<br>• Industry pack with wooden handle
• To work in high-alloy tool steels for the sharpening of heavy implements<br>• For filing flat surfaces, sharp corners and shoulders as well as for deburring<br>• Shape: edges tapered towards the tip, surfaces parallel<br>• Type of cut: 1 = bastard, 2 = second, 3 = smooth<br>• Surfaces double cut, edge single cut<br>• Pointed shape enables the user to reach more easily into angles and corners<br>• For the same jobs as flat hand file 100<br>• Industry pack unhandled
• To work in high-alloy tool steels for the sharpening of heavy implements<br>• For filing flat surfaces, sharp corners and shoulders as well as for deburring<br>• Shape: edges tapered towards the tip, surfaces parallel<br>• Type of cut: 1 = bastard, 2 = second, 3 = smooth<br>• Surfaces double cut, edge single cut<br>• Pointed shape enables the user to reach more easily into angles and corners<br>• For the same jobs as flat hand file 100<br>• Industry pack unhandled
• To work in high-alloy tool steels for the sharpening of heavy implements<br>• For filing flat surfaces, sharp corners and shoulders as well as for deburring<br>• Shape: edges tapered towards the tip, surfaces parallel<br>• Type of cut: 1 = bastard, 2 = second, 3 = smooth<br>• Surfaces double cut, edge single cut<br>• Pointed shape enables the user to reach more easily into angles and corners<br>• For the same jobs as flat hand file 100<br>• Industry pack unhandled
• For sharpening all types of saw with fine universal teething<br>• Shape: Triangular, with edges tapered towards tip<br>• Type of cut: 2 = Second<br>• Surfaces triangular single cut, edges single cut tapering towards the tip<br>• Industry pack unhandled
• For filing grooves, rectangular holes, inside corners and for fine-adjustment of cutting tools<br>• Shape: Surfaces tapered towards tip<br>• Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth<br>• Double cut<br>• Industry pack unhandled
• For filing grooves, rectangular holes, inside corners and for fine-adjustment of cutting tools<br>• Shape: Surfaces tapered towards tip<br>• Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth<br>• Double cut<br>• Industry pack unhandled
• For filing grooves, rectangular holes, inside corners and for fine-adjustment of cutting tools<br>• Shape: Surfaces tapered towards tip<br>• Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth<br>• Double cut<br>• Industry pack unhandled
• For sharpening power hacksaw blades<br>• Shape: triangular, with round edges tapering towards the tip<br>• Surfaces and edges single cut<br>• Type of cut: 2 = second<br>• Industry pack unhandled
• File handle developed according to the scientific ERGO™ process<br>• Maximum comfort with minimum effort thanks to an ergonomic design<br>• Comfortable two-component handle giving an excellent grip<br>• For sharpening power hacksaw blades<br>• Triangular, with round edges tapering towards the tip<br>• Surfaces and edges single cut<br>• Type of cut: 2 = second<br>• Single pack carded
• For filing narrow grooves and passages, etc.<br>• Particularly well-suited to filing cuts on keys<br>• Shape: edges tapered to a point, surfaces parallel<br>• Type of cut: 1 = bastard, 2 = second, 3 = smooth<br>• Surfaces double cut, edge single cut<br>• For filing narrow grooves<br>• Surfaces double cut, edge single cut, edges tapered towards the tip<br>• Industry pack unhandled
• For filing narrow grooves and passages, etc.<br>• Particularly well-suited to filing cuts on keys<br>• Shape: edges tapered to a point, surfaces parallel<br>• Type of cut: 1 = bastard, 2 = second, 3 = smooth<br>• Surfaces double cut, edge single cut<br>• For filing narrow grooves<br>• Surfaces double cut, edge single cut, edges tapered towards the tip<br>• Industry pack unhandled
• For deburring and filing angles and inner corners<br>• Shape: Equilateral triangle, tapered towards tip<br>• Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth<br>• Double cut surfaces<br>• Tapered surfaces are well-suited to flat filing<br>• Industry pack unhandled
• For deburring and filing angles and inner corners<br>• Shape: Equilateral triangle, tapered towards tip<br>• Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth<br>• Double cut surfaces<br>• Tapered surfaces are well-suited to flat filing<br>• Industry pack unhandled
• For filing concave and flat surfaces and large holes<br>• Suitable for deburring work<br>• Shape: Edges and surfaces tapered towards tip<br>• Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth<br>• Double cut surfaces, uncut edges<br>• Tapered shape for easier access into angles and corners<br>• Industry pack unhandled
• For filing concave and flat surfaces and large holes<br>• Suitable for deburring work<br>• Shape: Edges and surfaces tapered towards tip<br>• Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth<br>• Double cut surfaces, uncut edges<br>• Tapered shape for easier access into angles and corners<br>• Industry pack unhandled
