• Extra long reach impact wheel socket set<br>• Thanks to the 150 mm long reach, eliminates the need for an extension on wide and/or low offset wheels<br>• Plastic protection on socket walls to ensure protection of the rims<br>• Plastic protection inside the socket to ensure protection of wheel nuts<br>• Length: 150 mm, for deep access<br>• Drive: 1/2"<br>• Black phosphate finish<br>• High performance alloy steel<br>• Hardness: 40-48 HRC<br>• Includes 3 different sockets: 17 mm [blue], 19 mm [yellow] and 21 mm [red]<br>• Also available individually
• Used to close the two ends of the CV boots<br>• AISI 430 stainless steel<br>• Strap thickness: 5 mm<br>• Set includes a 15 m strap and 50 buckles to close the collars<br>• For use with our strap pliers BE251200<br>• Retail packed in a practical box to easily unwind the strap
• Used to close the two ends of the CV boots<br>• AISI 430 stainless steel<br>• Strap thickness: 8 mm<br>• Set includes a 15 m strap and 50 buckles to close the collars<br>• For use with our strap pliers BE251200<br>• Retail packed in a practical box to easily unwind the strap
• Wider base surface to reduce pressure on the ground<br>• Safety pin locking system with rubber grip<br>• Special location on base to leave the safety pin vertical<br>• Two jack stand models available with different load capacities<br>• TÜV approved and GS certified<br>• Sold individually
• This set of five diesel injector cutters is used to clean the injector seat to ensure that it has the right dimension when replacing or reworking the injector<br>• Reworking the injector seat with this set avoids bad starting, hesitation on acceleration, black deposits, etc. and affecting vehicle´s ECU<br>• Set contents.<br>• T-handle [ref. BE1315P71]<br>• Centring guide [ref. BE1315P72]<br>• Cutters<br>• 15 x 19 mm flat cutter for various car makes [ref. BE1315P73]<br>• 17 x 17 mm angled cutter for various car makes [ref. BE1315P74]<br>• 17 x 17 mm flat cutter for BMW, PSA, Renault, etc. [ref. BE1315P75]<br>• 17 x 19 mm flat cutter for Mercedes CRD engines, etc. [ref. BE1315P76]<br>• 17 x 21 mm angled cutter for Fiat Group, Iveco, etc. [ref. BE1315P77]<br>• High performance alloy steel<br>• Components and spare parts available<br>• Supplied in a blow moulded case, in foam inlay for better tool management
• Includes ERGO™ handle with 1/4" hexagon drive bit holder for blades or bits and interchangeable blades<br>• 100 mm blades: 0.6 x 3.5, 0.8 x 4.0, 1.0 x 5.5, 1.2 x 6.5, PH1, PH2, PH3, PZ1, PZ2, PZ3, T10, T15, T20, T25, T30, T40; 25 mm bits: H2,5, H3, H4, H5, H6, H8<br>• Lock-in type system for easy and safety lock, magnetic, blades stays caught until the release is driven<br>• With strong permanent magnet<br>• Screwdriver developed according to the scientific ERGO™ process<br>• Three-component handle for maximum user comfort, soft material with ridged surface provides superior grip and greater force transmission<br>• Maximum comfort with minimum effort thanks to an ergonomic design<br>• Colour-coded handle<br>• Flat face to prevent rolling away<br>• Integrated hanging hole<br>• Blades length 100 mm and hexagon profile, phosphate finish<br>• Bits length 25 mm, Zinc phosphate finish<br>• Presented in a foam inlay
• Used for finishing on material where hardness makes conventional files ineffective<br>• Used by die and mould makers and for special manufacturing applications on materials such as hardened steel, ceramics, glass, graphite<br>• 2-300 flat, surfaces and edges parallel<br>• 2-301 flat, surfaces parallel, tapered point<br>• 2-302 3 square, tapered point<br>• 2-303 square, tapered point<br>• 2-304 half-round, tapered point<br>• Coated with D126 diamond grit for use on hardened steel, ceramics, glass, graphite<br>• Single packed in plastic pouches
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: triangular, one surface extra-wide<br>• Type of cut: 2 = smooth, 4 = dead smooth<br>• Surfaces and edges taper to a point<br>• Wider surface double cut, edges and narrower surfaces uncut<br>• Packing: 10 pieces per box
• Used for finishing on material where hardness makes conventional files ineffective<br>• Used by die and mould makers and for special manufacturing applications on materials such as hardened steel, ceramics, glass, graphite<br>• 2-300 flat, surfaces and edges parallel<br>• 2-301 flat, surfaces parallel, tapered point<br>• 2-302 3 square, tapered point<br>• 2-303 square, tapered point<br>• 2-304 half-round, tapered point<br>• Coated with D126 diamond grit for use on hardened steel, ceramics, glass, graphite<br>• Single packed in plastic pouches
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: conventional half-round needle file<br>• Type of cut: 0 = bastard, 1 = second, 2 = smooth, 4 = dead smooth<br>• Surface tapers to a point and double cut on radius with uncut flat side<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: oval, surfaces tapered towards the point<br>• Type of cut: 1 = second, 2 = smooth<br>• Double cut<br>• Packing: 10 pieces per box
• Used for finishing on material where the hardness makes conventional files ineffective<br>• Used by die and mould makers and for special manufacturing applications on materials such as hardened steel, ceramics, glass, graphite<br>• Shapes match the corresponding conventional needle files<br>• 2-306 - two convex surfaces of different radii, tapering to a point<br>• 2-307 - round, tapering to a point<br>• 2-308 - conical, edges and surfaces taper to a point, uncut back<br>• Files are covered with diamond grit (D 126) and are supplied in individual plastic pouches<br>• Single pack
• Used for finishing on material where hardness makes conventional files ineffective<br>• Used by die and mould makers and for special manufacturing applications on materials such as hardened steel, ceramics, glass, graphite<br>• 2-300 flat, surfaces and edges parallel<br>• 2-301 flat, surfaces parallel, tapered point<br>• 2-302 3 square, tapered point<br>• 2-303 square, tapered point<br>• 2-304 half-round, tapered point<br>• Coated with D126 diamond grit for use on hardened steel, ceramics, glass, graphite<br>• Single packed in plastic pouches
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: surfaces taper to a point, flat and convex surfaces double cut<br>• Type of cut: 0 = bastard, 1 = second, 2 = smooth, 4 = dead smooth<br>• Surfaces parallel flat and convex, both double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: surfaces taper to a point, flat and convex surfaces double cut<br>• Type of cut: 0 = bastard, 1 = second, 2 = smooth, 4 = dead smooth<br>• Surfaces parallel flat and convex, both double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: surfaces taper to a point, flat and convex surfaces double cut<br>• Type of cut: 0 = bastard, 1 = second, 2 = smooth, 4 = dead smooth<br>• Surfaces parallel flat and convex, both double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: surfaces taper to a point, flat and convex surfaces double cut<br>• Type of cut: 0 = bastard, 1 = second, 2 = smooth, 4 = dead smooth<br>• Surfaces parallel flat and convex, both double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: Triangular, surfaces taper to a point<br>• Type of cut: 0 = Bastard, 1 = Second, 2 = Smooth, 4 = Dead smooth<br>• Surfaces triangular and double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: Triangular, surfaces taper to a point<br>• Type of cut: 0 = Bastard, 1 = Second, 2 = Smooth, 4 = Dead smooth<br>• Surfaces triangular and double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: Triangular, surfaces taper to a point<br>• Type of cut: 0 = Bastard, 1 = Second, 2 = Smooth, 4 = Dead smooth<br>• Surfaces triangular and double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: Triangular, surfaces taper to a point<br>• Type of cut: 0 = Bastard, 1 = Second, 2 = Smooth, 4 = Dead smooth<br>• Surfaces triangular and double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: triangular, one surface extra-wide<br>• Type of cut: 2 = smooth, 4 = dead smooth<br>• Surfaces and edges taper to a point<br>• Wider surface double cut, edges and narrower surfaces uncut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: 2 convex surfaces of different radii, tapering to a point<br>• Type of cut: 1 = second, 2 = smooth<br>• Surfaces double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: 2 convex surfaces of different radii, tapering to a point<br>• Type of cut: 1 = second, 2 = smooth<br>• Surfaces double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: Surfaces parallel, edges taper to a point<br>• Type of cut: 0 = Bastard, 1 = Second, 2 = Smooth<br>• Surfaces double cut, edge single cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: Surfaces parallel, edges taper to a point<br>• Type of cut: 0 = Bastard, 1 = Second, 2 = Smooth<br>• Surfaces double cut, edge single cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: Surfaces parallel, edges taper to a point<br>• Type of cut: 0 = Bastard, 1 = Second, 2 = Smooth<br>• Surfaces double cut, edge single cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: conical, edges and surfaces taper to a point<br>• Type of cut: 0 = bastard, 1 = second, 2 = smooth<br>• Flat, uncut back<br>• Surfaces double cut, thin edge single cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: conical, edges and surfaces taper to a point<br>• Type of cut: 0 = bastard, 1 = second, 2 = smooth<br>• Flat, uncut back<br>• Surfaces double cut, thin edge single cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: oval, surfaces tapered towards the point<br>• Type of cut: 1 = second, 2 = smooth<br>• Double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: round<br>• Type of cut: 0 = bastard, 1 = second, 2 = smooth, 4 = dead smooth<br>• Surfaces taper to a point, double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: round<br>• Type of cut: 0 = bastard, 1 = second, 2 = smooth, 4 = dead smooth<br>• Surfaces taper to a point, double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: round<br>• Type of cut: 0 = bastard, 1 = second, 2 = smooth, 4 = dead smooth<br>• Surfaces taper to a point, double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: round<br>• Type of cut: 0 = bastard, 1 = second, 2 = smooth, 4 = dead smooth<br>• Surfaces taper to a point, double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: Square, surfaces taper to a point<br>• Type of cut: 0 = Bastard, 1 = Second, 2 = Smooth, 4 = Dead smooth<br>• Surfaces double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: Square, surfaces taper to a point<br>• Type of cut: 0 = Bastard, 1 = Second, 2 = Smooth, 4 = Dead smooth<br>• Surfaces double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: Square, surfaces taper to a point<br>• Type of cut: 0 = Bastard, 1 = Second, 2 = Smooth, 4 = Dead smooth<br>• Surfaces double cut<br>• Packing: 10 pieces per box
<p style="margin-left:0px;"><span style="background-color:rgb(255,255,255);color:rgb(51,51,51);">Kasutatakse mitmesuguste metallide lihvimiseks, nugade teritamiseks ja erinevate lihvimistööde tegemiseks. Ketas on valmistatud elektrokorundist, mis on kokku liimitud, et tagada ketasele vajalik kõvadus ja kasutusiga. Ketta suurus on 175 mm, laius 32 mm. Kinnitusava läbimõõt on 25mm. </span><br><br><strong>Tehnilised andmed:</strong></p><ul><li>Ketta läbimõõt: 175 mm</li><li>Montaažiaugu läbimõõt: 25 mm</li><li>Ketta laius: 32 mm</li><li>Gradatsioon: 60</li><li>Abrasiivsort: elektrokorund</li></ul>
• This set of five diesel injector cutters is used to clean the injector seat to ensure that it has the right dimension when replacing or reworking the injector<br>• Reworking the injector seat with this set avoids bad starting, hesitation on acceleration, black deposits, etc. and affecting vehicle´s ECU<br>• Set contents.<br>• T-handle [ref. BE1315P71]<br>• Centring guide [ref. BE1315P72]<br>• Cutters<br>• 15 x 19 mm flat cutter for various car makes [ref. BE1315P73]<br>• 17 x 17 mm angled cutter for various car makes [ref. BE1315P74]<br>• 17 x 17 mm flat cutter for BMW, PSA, Renault, etc. [ref. BE1315P75]<br>• 17 x 19 mm flat cutter for Mercedes CRD engines, etc. [ref. BE1315P76]<br>• 17 x 21 mm angled cutter for Fiat Group, Iveco, etc. [ref. BE1315P77]<br>• High performance alloy steel<br>• Components and spare parts available<br>• Supplied in a blow moulded case, in foam inlay for better tool management
• This set of five diesel injector cutters is used to clean the injector seat to ensure that it has the right dimension when replacing or reworking the injector<br>• Reworking the injector seat with this set avoids bad starting, hesitation on acceleration, black deposits, etc. and affecting vehicle´s ECU<br>• Set contents.<br>• T-handle [ref. BE1315P71]<br>• Centring guide [ref. BE1315P72]<br>• Cutters<br>• 15 x 19 mm flat cutter for various car makes [ref. BE1315P73]<br>• 17 x 17 mm angled cutter for various car makes [ref. BE1315P74]<br>• 17 x 17 mm flat cutter for BMW, PSA, Renault, etc. [ref. BE1315P75]<br>• 17 x 19 mm flat cutter for Mercedes CRD engines, etc. [ref. BE1315P76]<br>• 17 x 21 mm angled cutter for Fiat Group, Iveco, etc. [ref. BE1315P77]<br>• High performance alloy steel<br>• Components and spare parts available<br>• Supplied in a blow moulded case, in foam inlay for better tool management
• This set of five diesel injector cutters is used to clean the injector seat to ensure that it has the right dimension when replacing or reworking the injector<br>• Reworking the injector seat with this set avoids bad starting, hesitation on acceleration, black deposits, etc. and affecting vehicle´s ECU<br>• Set contents.<br>• T-handle [ref. BE1315P71]<br>• Centring guide [ref. BE1315P72]<br>• Cutters<br>• 15 x 19 mm flat cutter for various car makes [ref. BE1315P73]<br>• 17 x 17 mm angled cutter for various car makes [ref. BE1315P74]<br>• 17 x 17 mm flat cutter for BMW, PSA, Renault, etc. [ref. BE1315P75]<br>• 17 x 19 mm flat cutter for Mercedes CRD engines, etc. [ref. BE1315P76]<br>• 17 x 21 mm angled cutter for Fiat Group, Iveco, etc. [ref. BE1315P77]<br>• High performance alloy steel<br>• Components and spare parts available<br>• Supplied in a blow moulded case, in foam inlay for better tool management
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: round<br>• Type of cut: 0 = bastard, 1 = second, 2 = smooth, 4 = dead smooth<br>• Surfaces taper to a point, double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: round<br>• Type of cut: 0 = bastard, 1 = second, 2 = smooth, 4 = dead smooth<br>• Surfaces taper to a point, double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: surfaces taper to a point, flat and convex surfaces double cut<br>• Type of cut: 0 = bastard, 1 = second, 2 = smooth, 4 = dead smooth<br>• Surfaces parallel flat and convex, both double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: Triangular, surfaces taper to a point<br>• Type of cut: 0 = Bastard, 1 = Second, 2 = Smooth, 4 = Dead smooth<br>• Surfaces triangular and double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: Triangular, surfaces taper to a point<br>• Type of cut: 0 = Bastard, 1 = Second, 2 = Smooth, 4 = Dead smooth<br>• Surfaces triangular and double cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: Edges and surfaces parallel<br>• Type of cut: 0 = Bastard, 1 = Second, 2 = Smooth, 4 = Dead smooth<br>• Surfaces double cut, edge single cut<br>• Packing: 10 pieces per box
• For fine filing and polishing jobs<br>• Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths<br>• Shape: Square, surfaces taper to a point<br>• Type of cut: 0 = Bastard, 1 = Second, 2 = Smooth, 4 = Dead smooth<br>• Surfaces double cut<br>• Packing: 10 pieces per box
