ikka.ee

• Designed for tightening wheel nuts with an impact wrench without exceeding the recommended torque<br>• Colour coded ring for easy identification of the maximum torque of each bar:<br>• Green: 90Nm / Black: 100Nm / Gold: 110Nm / Red: 120Nm / Blue: 135Nm / Orange: 150Nm / Grey: 160Nm / Purple: 175Nm / White: 190Nm / Light green: 200Nm<br>• We recommend always using a torque wrench to adjust the final specified tightening torque<br>• Drive: 1/2" drive<br>• Black phosphate finish<br>• High performance alloy steel<br>• Hardness: 40-48 HRC<br>• Retail packed with an anti-theft plastic clip<br>• Part of the BWTB12P5 set

• Impact torsion bars<br>• Used to control the torque applied to wheels and other parts<br>• Various permissible torque values<br>• Drive: 1"<br>• Black phosphate finish<br>• High performance alloy steel<br>• For maximum safety, always use clamping springs [ref. K560F-7]

• Impact torsion bars<br>• Used to control the torque applied to wheels and other parts<br>• Various permissible torque values<br>• Drive: 1"<br>• Black phosphate finish<br>• High performance alloy steel<br>• For maximum safety, always use clamping springs [ref. K560F-7]

• Designed for tightening wheel nuts with an impact wrench without exceeding the recommended torque<br>• Colour coded ring for easy identification of the maximum torque of each bar:<br>• Green: 90Nm / Black: 100Nm / Gold: 110Nm / Red: 120Nm / Blue: 135Nm<br>• We recommend always using a torque wrench to adjust the final specified tightening torque<br>• Drive: 1/2" drive<br>• Black phosphate finish<br>• High performance alloy steel<br>• Hardness: 40-48 HRC<br>• Supplied in a blow moulded case, in plastic inlay for better tool management<br>• Also sold individually

• Wire tie tensioning and cutting tool<br>• For electric nylon ties from 2.2 to 5 mm wide, and up to 1.6 mm thick<br>• Adjustable tension to avoid overtightening and cable damage<br>• Once reached the appropriate tension, the tie is automatically cut

• Wire tie tensioning and cutting tool<br>• For electric nylon ties up to 9.5 mm wide, and 2.3 mm thick<br>• Install the tie in the tool, then apply tension pressing the handles<br>• Press the secondary lever to cut the exceeding part at the desired measure

Akulaadimise uusimat tehnoloogiat kasutav intelligentne SCANGRIP CHARING PAD võimaldab käsivalgusti MAG PRO WIRELESS (03.5691) lihtsat ja kiiret automaatset laadimist, kuid toimib ka lambi mugava hoidikuna töökojas.<br>Laadimisalus on disainitud nii, et lamp "libiseb” automaatselt õigesse positsiooni tänu tagaküljel asuvatele võimsatele magnetitele. Seetõttu saab selle kompaktse disainiga üliõhukese laadimisaluse paigaldada peaaegu kõikjale: töölauale, seinale või isegi lae alla, eemaldades lihtsalt kaks keeratavat korki ja kasutades kahte 4 mm kruvi.<br>Intelligentne objektituvastus tähendab, et laadimisalust saab kasutada ka enamiku mobiiltelefonide ja muude ühilduvate seadmete laadimiseks.<br>Punane LED-tuli teavitab laadimisaluse olekust. See vilgub sisselülitamisel 5 korda ja ooterežiimis iga 10 sekundi järel. Laadimise ajal põleb see pidevalt ja vilgub kiiresti, kui tuvastatakse viga. <br><br>Sisendvõimsus: 100-240 V / 50-60 Hz / 0.2 A<br>Väljundvõimsus: 5 V DC/ 1.0 A<br> Energiatarve: Max. 5 W<br> Töötemperatuur: -10° kuni 40°C<br>Kaitseklass: IK07 / IP20<br>Mõõdud: 183 x 84 x 13 mm<br>Kaal: 115 g<br><br>Laadimisalus tarnitakse ilma kaablita (vajalik USB - USB-C kaabel)<br><br><iframe width="560" height="315" src="https://www.youtube.com/embed/kY_Cp4Yps_A?si=ti34PfpRRCB4U6SA" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

• WCB001R on ideaalne lisaseade SLM1K2R-ile ja kõigile Qi-toega telefonidele ja seadmetele <br> • Ohutuskaitse – ülevool, liigpinge, kõrge temperatuur <br> • Lihtne seadmega sidumine <br> • Näidik annab teile teada laadimisoleku

• Used to start vehicles by connecting batteries between them<br>• Fully insulated cables and clamps<br>• Clamps and leads are made of high conductivity materials<br>• Ensure an optimal connection and current transfer<br>• There are different sizes depending on the current that will pass through the cables and clamps<br>• Guidance on the largest type of vehicle for which each model can be used is defined in the following table as:<br>• P/D: P stands for petrol and D for diesel<br>• Then engine displacement in litres is stated with maximum of:<br>• 2.5, 4.0 or 5.5 for petrol engines and<br>• 1.5, 2.0 or 3.0 for diesel engines

• Used to start vehicles by connecting batteries between them<br>• Fully insulated cables and clamps<br>• Clamps and leads are made of high conductivity materials<br>• Ensure an optimal connection and current transfer<br>• There are different sizes depending on the current that will pass through the cables and clamps<br>• Guidance on the largest type of vehicle for which each model can be used is defined in the following table as:<br>• P/D: P stands for petrol and D for diesel<br>• Then engine displacement in litres is stated with maximum of:<br>• 2.5, 4.0 or 5.5 for petrol engines and<br>• 1.5, 2.0 or 3.0 for diesel engines

• For jewellers<br>• With rounded tips, jaws finely serrated<br>• Material: 5470 and 5470 I special hardened steel, 5470 R stainless-steel, anti-magnetic, anti-acid<br>• Finish: 5470 and 5470 R polished, nickel-plated, 5470 I PVC coated<br>• Tweezers have perfect balance with tip alignment and symmetry to meet the most sophisticated and demanding requirements

• For jewellers<br>• With rounded tips, jaws finely serrated<br>• Material: 5470 and 5470 I special hardened steel, 5470 R stainless-steel, anti-magnetic, anti-acid<br>• Finish: 5470 and 5470 R polished, nickel-plated, 5470 I PVC coated<br>• Tweezers have perfect balance with tip alignment and symmetry to meet the most sophisticated and demanding requirements

• Flexible carbon steel ground blade<br>• 1.5 mm thickness/0.5 mm at the tip<br>• Polished and varnished blade to prevent oxidation<br>• Handle materials polypropylene and elastomer, combination of materials for a perfect hand coupling and reduced hand fatigue<br>• Available with hanging hole

• High strength rectified stainless steel blade<br>• 1.5 mm thickness/0.5 mm at the tip<br>• Polished, mirror finish blade<br>• Doesn´t leave oxidation marks<br>• Handle materials polypropylene and elastomer, combination of materials for a perfect hand coupling and reduced hand fatigue<br>• Available with hanging hole

• Flexible carbon steel ground blade<br>• 1.5 mm thickness/0.5 mm at the tip<br>• Polished and varnished blade to prevent oxidation<br>• Handle materials polypropylene and elastomer, combination of materials for a perfect hand coupling and reduced hand fatigue<br>• Available with hanging hole

• Cabinet scraper for carpentry work such as smoothing wood surfaces, levelling between finish coats and removing old paint<br>• Blade of cold-rolled, hardened and tempered chrome-nickel steel<br>• White plastic edge protector<br>• Unitary hangable plastic bag

• Cabinet scraper for carpentry work such as smoothing wood surfaces, levelling between finish coats and removing old paint<br>• Blade of cold-rolled, hardened and tempered chrome-nickel steel<br>• White plastic edge protector<br>• Unitary hangable plastic bag

• Cabinet scraper for carpentry work such as smoothing wood surfaces, levelling between finish coats and removing old paint<br>• Blade of cold-rolled, hardened and tempered chrome-nickel steel<br>• White plastic edge protector<br>• Unitary hangable plastic bag

• Cabinet scraper for carpentry work such as smoothing wood surfaces, levelling between finish coats and removing old paint<br>• Blade of cold-rolled, hardened and tempered chrome-nickel steel<br>• White plastic edge protector<br>• Unitary hangable plastic bag

• Flexible carbon steel ground blade<br>• 1.5 mm thickness/0.5 mm at the tip<br>• Polished and varnished blade to prevent oxidation<br>• Handle materials polypropylene and elastomer, combination of materials for a perfect hand coupling and reduced hand fatigue<br>• Available with hanging hole

• Flexible carbon steel ground blade<br>• 1.5 mm thickness/0.5 mm at the tip<br>• Polished and varnished blade to prevent oxidation<br>• Plastic handle<br>• Available with hanging hole

• Carbon steel ground blade<br>• 1.2 mm thickness/0.4 mm at the tip<br>• Full body rigid blade riveted to the handle<br>• Nylon handle resists shattering<br>• Available with hanging hole

• High strength rectified stainless steel blade<br>• 1.5 mm thickness/0.5 mm at the tip<br>• Polished, mirror finish blade<br>• Doesn´t leave oxidation marks<br>• Handle materials polypropylene and elastomer, combination of materials for a perfect hand coupling and reduced hand fatigue<br>• Available with hanging hole

• Värvikaabits, mis on välja töötatud vastavalt teaduslikule ERGO™ protsessile<br> • Spetsiaalselt loodud täppistöödeks nagu akende kraapimine ja vormimine<br> • Kahekomponentne käepide annab parema haarde ja suurepärase töömugavuse<br> • Kitsas esiosa tagab täpse pöidla asetuse<br> • Kõvasulam tera<br> • Tarnitakse 25 mm kolmnurkse teraga (kood 449)<br> • Tarnitakse klambriga vutlaris<br> • Muud sobivad terad: 625-PEAR, 625-ROUND, 625-PEAR

• Värvikaabits, mis on välja töötatud vastavalt teaduslikule ERGO™ protsessile<br> • Tugev kaabits jõuliseks kraapimiseks suurtematel aladel<br> • Kahekomponentme käepide annab parema haarde ja suurepärase töömugavuse<br> • Kitsas kaabitsapea tagab parema juurdepääsu kitsastes kohtades<br> • Kõvasulam tera<br> • Tarnitakse 65 mm kaheservalise sirge teraga (kood 451)<br> • Muud sobivad terad: 442 ja 865-1

<p><strong>Tehnilised andmed:</strong></p><ul><li>Kasutamise eesmärk: vanade pinnakatete, värvide, silikoonide, elastsete materjalide eemaldamine</li><li>Laius: 32mm</li><li>Tera pikkus: 32mm</li><li>Tera pikkus: 32mm: 50mm</li><li>Konstruktsioonimaterjal: roostevaba teras</li></ul>

• Puidu, metalli ja betooni kraapimiseks<br> • Kõvasulam tera püsib terav kuni 50 korda kauem kui tavalisest terasest tera<br> • Terad on täppislihvitud kergelt kumera kujuga, mis ei lase tera nurkadel tööpinda kriimustada<br> • Kolmnurkne tera on kergesti pööratav ja muudetav erinevate raadiuste või nurkade jaoks<br> • Tera sobib Bahco 625 kaabitsale

• Puidu, metalli ja betooni kraapimiseks<br> • Kõvasulam tera püsib terav kuni 50 korda kauem kui tavalisest terasest tera<br> • Värvi kaabitsa tera patenteeritud lainekujuliste servadega<br> • Terad on kahe servaga ja sobivad Bahco 650 kaabitsale

• Puidu, metalli ja betooni kraapimiseks<br> • Kõvasulam tera püsib terav kuni 50 korda kauem kui tavalisest terasest tera<br> • Terad on täppislihvitud kergelt kumera kujuga, mis ei lase tera nurkadel tööpinda kriimustada<br> • Kaheservaline tera on kergesti pööratav ja muudetav erinevate raadiuste või nurkade jaoks<br> • Tera sobib Bahco 665 kaabitsale

• Puidu, metalli ja betooni kraapimiseks<br> • Kõvasulam tera püsib terav kuni 50 korda kauem kui tavalisest terasest tera<br> • Värvi kaabitsa tera patenteeritud lainekujuliste servadega<br> • Terad on kahe servaga ja sobivad Bahco 665 kaabitsale

• Erineva raadiusega soonte, servade ja nurkade kraapimiseks<br> • Puidu, metalli ja betooni kraapimiseks<br> • Kõvasulam tera püsib terav kuni 50 korda kauem kui tavalisest terasest tera<br> • Erinevate raadiuste või teravate nurkade jaoks saab tera pöörata 360°<br> • Ümara osa diameeter on 17 mm<br> • Tera sobib Bahco 625 kaabitsale

• Erineva raadiusega soonte, servade ja nurkade kraapimiseks<br> • Puidu, metalli ja betooni kraapimiseks<br> • Kõvasulam tera püsib terav kuni 50 korda kauem kui tavalisest terasest tera<br> • Erinevate raadiuste või teravate nurkade jaoks saab tera pöörata 360°<br> • Ümara osa diameeter on 17 mm<br> • Tera sobib Bahco 625 kaabitsale

• Puidu, metalli ja betooni kraapimiseks<br> • Kõvasulam tera püsib terav kuni 50 korda kauem kui tavalisest terasest tera<br> • Terad on täppislihvitud kergelt kumera kujuga, mis ei lase tera nurkadel tööpinda kriimustada<br> • Kaheservaline tera on kergesti pööratav ja muudetav erinevate raadiuste või nurkade jaoks<br> • Tera sobib Bahco 650 kaabitsale

• ERGO™ paint scraper set with 625 and 650 paint scrapers and 625-ROUND, 625-DROP and 625-PEAR profile blades<br>• 625 for precision work such as scraping windows, moulding and narrow corners and 650 for universal use regardless of scraping direction<br>• Two-component handle provides ample space to scrape with both hands, better grip and excellent working comfort. Narrow front for a precision thumbgrip<br>• Carbide blades<br>• Contains the 625 with hoslter and 449 blade, 625-ROUND, DROP and PEAR and 650 with 442 blade<br>• Maximum comfort with minimum effort due to the ergonomic design<br>• Designed for universal use and precision work such as scraping windows, moulding and narrow corners<br>• Comfortаble two-component handle better an excellent grip and comfort<br>• Slim scraper head for better access in confined spaces<br>• Carbide blades for easy removal of paint, glue, varnish and rust off various surfaces

• Koorimisulatus 6 - 13 mm<br>• Puhas koorimine isegi raskesti ligipääsetavates kohtades<br>• Loodud ohutuks kasutamiseks tänu ergonoomilise kujuga libisemisvastasele käepidemele<br>• Puudub lõikesügavuse seadmise vajadus

• Cable cutter to cut aluminium or copper cables with or without messenger wire<br>• Cutting capacity: 30 mm diameter of Al/Cu with a messenger wire of hard steel, maximum 6 mm diameter<br>• Alloy steel<br>• Phosphate finish, epoxy painted handles

• Diagonal cable cutter<br>• Recommended maximum capacity: steel wire 130 kg/mm² and Ø1.5 mm<br>• Cuts rivets, nails, bits, screws, etc.<br>• High-performance alloy steel<br>• Phosphate finish

• Lightweight tool designed for cutting solid materials and multi-wire cables<br>• Finish: Black finish<br>• Material: Alloy steel, elastomer handles for comfort<br>• Spring and locking mechanism<br>• Medium hard wire: Ø 5 mmPiano wire: Ø 1.5 mmLow carbon steel wire: Ø 4 mm