• Cutting capacity: Copper wire, plastic coated copper or aluminium cables<br>• Special steel<br>• Chrome finish fine-polished, cutting part phosphate finish with red PVC handles
• Cable cutter suitable for cutting aluminium or copper cables<br>• For a maximum service life, the sharpened parts of the blades must never be used on ferrous material<br>• Cutting capacity: 42 mm diameter of Al/Cu<br>• Alloy steel<br>• Phosphate finish, handles epoxy painted
• 1-layer injection moulded insulation<br>• For work on live equipment up to 1000 V according to IEC 60900<br>• With plastic protective cap<br>• Each and every tool is tested to 10.000V for 10 seconds at the end of the manufacturing cycle
• Useful in confined spaces due to the pointed nose<br>• Application areas encompass machining cast iron, cast steel, carbon steel, alloy steel, stainless steel, hardened steel, copper and aluminium<br>• DIN: SPG<br>• Fine: for hard and/or tough materials where a smooth surface finish is required and removal demands are modest<br>• Medium: for machining hard and/or tough materials under normal conditions<br>• Coarse: particularly suitable for machining stainless steel, soft materials or light alloys<br>• Extra coarse: blunt<br>• X-Cut: for hard and soft materials, produces short and blunt chips, runs smoothly even at low cutting speeds<br>• Diamond cut: for heat-treated and tough alloy steels and epoxy, excellent finish, minimal axial forces<br>• A smaller diameter burr will have a finer cut than a larger diameter burr belonging to the same cut category, for example, medium-cut<br>• Stock standard: X = yes<br>• Indispensable tool, used in large number of industrial sectors including aviation, shipping, automotive and the chemical industry etc.<br>• Used to deburr irregular objects or to complete finishing work inside a confined space<br>• Number of teeth is also indicated in addition to the type of cut for each rotary burr<br>• Deburring of surfaces with round edges and surfaces
Kaanel ja põhjas olevad kummipaelast kinnitusrihmad tööriistade paremaks jaotamiseks<br>Denier 600 polüesterkangas tagab pika kasutusea<br>Kummikihiga kaetud käepide lihtsamaks transportimiseks<br>Mõõdulindi hoidik<br>Sisaldab pehmet sisevoodrit<br>Kaardihoidik ees ja küljel sisu väliseks tuvastamiseks<br>Tasku mõõdulindi, kaardi ja mobiiltelefoni jaoks<br>Erinevad taskud ja lahtrid<br>Mõõtmed: 330 × 275 × 62 mm
Kaanel ja põhjas olevad kummipaelast kinnitusrihmad tööriistade paremaks jaotamiseks<br>Denier 600 polüesterkangas tagab pika kasutusea<br>Kummikihiga kaetud käepide lihtsamaks transportimiseks<br>Mõõdulindi hoidik<br>Kaardihoidik ees ja küljel sisu väliseks tuvastamiseks<br>Tasku mõõdulindi, kaardi ja mobiiltelefoni jaoks<br>Erinevad taskud ja lahtrid<br>Dokumendivõrk kaanel<br>Mõõtmed: 403 × 305 × 80 mm
• Centre punch with guard<br>• 2-component handle for increased safety<br>• End hardness 56-58 HRC<br>• Strike end hardness 56-58 HRC<br>• Retail packaging
• Centre punch with guard<br>• 2-component handle for increased safety<br>• End hardness 56-58 HRC<br>• Strike end hardness 56-58 HRC<br>• Retail packaging
Tootekood: 3734BMS/7Meislite ja tornide komplektid
• Set includes 7 pieces: 3734BM-2, 3734BM-3, 3734BM-4, 3734BM-5, 3734BM-6, 3734BM-8 and 3734BM-10<br>• Cylindrical<br>• Hardness 56 HRC to 58 HRC<br>• Guarded<br>• 58CrV4<br>• Two-component handle<br>• Available in a plastic tray
• Knurled handle end for better grip and comfort<br>• Made of high performance alloy steel, precision forged and heat treated to provide optimum durability<br>• Finish: matte chrome plated
• Adaptor included for big sizes<br>• Suitable for every size from 2 mm to 50 mm wad punches<br>• Ergonomic design to improve grip and comfort<br>• Robust design to resist impacts<br>• Individual packaging
Tootekood: 9-486-C-1PViilide tarvikud ja komplektid
• File handle developed according to the scientific ERGO™ process<br>• For round chainsaw files (type 168)<br>• Our file handles are ergonomically designed, following the Bahco ERGO Process, to reduce muscle tension and the risk of injury<br>• The hard polypropylene core, covered with a thermoplastic elastomer, provides a comfortable non-slip grip, and the handle’s smooth contours fit into the hand naturally<br>• As a safety feature, the handle covers the tang and shoulder completely to prevent the hand from slipping off the handle onto the file blade<br>• Single pack Carded<br>• Look at the file handle ѕelection guide to find the suitable handle for your file
• Provide a fast, reliable and comfortable grip for the operator when cutting out a windscreen using stainless wire<br>• Safer. The protective tube is specifically designed to prevent injury to the user´s hands from contact with the cutting wire<br>• Steel construction for high durability<br>• Black PVC handle for increased comfort and a safe and reliable grip<br>• Retail package with two units
Kaevamishark 4x10mm nelikant piidega 185x240mm, metallist varre ja kahekomponentse D-käepidemega, 1200mm
Tootekood: LST-52121Aiahargid
• Large-size fork head for loosening and turning soil<br>• Square-shaped welded prongs<br>• Head made from tempered carbon-steel with a matte powder coating<br>• Comfortable two-component D-handle with soft grip made of thermoplastic elastomer (TPR)<br>• Shaft made of a pear-shaped steel tube with a sleeve made of polyvinyl chloride (PVC)<br>• Hilt made of polypropylene (PP)
Kaevamishark 4x9mm piidega 150x240mm, metallist varre ja kahekomponentse D-käepidemega, 1030mm
Tootekood: LST-51121Aiahargid
• Medium-size fork head designed for working on borders<br>• Square-shaped prongs are welded<br>• Head made of tempered carbon-steel with matte powder coating<br>• Comfortable two-component D-handle with soft grip made of thermoplastic elastomer (TPR)<br>• Shaft made of a pear-shaped steel tube with a sleeve made of polyvinyl chloride (PVC)
• Astmeline süsteem lihtsaks ja pingutuseta töötamiseks<br>• Suurim avanemisulatus 15 mm<br>• Kaks seatavat asendit suure klambrite vahemiku jaoks<br>• Käepidemel on käe kaitseks ja paremaks haaramiseks PVC-kate<br>• Tehtud väga vastupidavast kroommolübdeenterasest<br>• Must fosfaatviimistlus
• Extractor: two arms<br>• Made of special steel<br>• Galvanised finish<br>• Spare body<br>• 4541-A/B for 4541-A<br>• 4541-B/B for 4541-B<br>• 4541K Spare arm<br>• Spare spindle<br>• 4532-OAB/S for 4541-A (M14 x 1.5 x 135, SW 17, 190 g)<br>• 4519-1/S for 4541-B (M18 x 1.5 x 240, SW 19, 485 g)<br>• Made of special steel
• Two arms, heavy-duty<br>• Made of special steel<br>• Galvanised finish<br>• Long reach<br>• Especially suited for pulling ball bearings, pulleys and gears<br>• Spare body<br>• 4537-1/B for 4537-1<br>• 4537-2/B for 4537-2<br>• 4537-34/B for 4537-3 and 4537-4<br>• 4537K Spare arm<br>• Spare spindle<br>• 4532-OAB/S for 4537-1 (M14 x 1.5 x 135, SW 17, 190 g)<br>• 4519-1/S for 4537-2 (M18 x 1.5 x 240, SW 19, 485 g)<br>• 4519-2/S for 4537-3 and 4537-4 (G1/2" x 14 x 270, SW 22, 730 g)<br>• Perfectly suited for ball bearings, pulleys and gears
Kahe haaratsi ja spindliga tõmmits, tõmmitsale 4521
Tootekood: 4522-2Tõmmitsad
• Galvanised finish<br>• Counter stay extractor for ball bearings<br>• Model 4522-1 fits extractors up to 4521N-M<br>• Model 4522-2 fits extractors 4521N-S and N-T<br>• To be used with 4521 series<br>• 4522/B Spare body<br>• 4522K Spare arm<br>• 4522/S Spare spindle<br>• 4522-1/S M16 x 1.5 x 136<br>• 4522-2/S M24 x 1.5 x 160
• Universal two-arm pullers<br>• Made of special steel<br>• Galvanised finish<br>• By reversing the arms, the extractor can be used internally or externally<br>• Strong design with large claw surfaces<br>• Body, arms and links are drop forged<br>• Wear-resistant, induction hardened spindles starting in size C<br>• 4532K Pair of spare arms<br>• 4532LK Pair of long spare arms<br>• 4532/S Spare spindle<br>• Large claw surfaces offer many advantages for careful and quick removal of pulleys, gears and ball bearings<br>• Externally-internally reversible by relocating arms<br>• Finish: Galvanised, with induction hardened spindle, from 4532-C, D, E, F, G and H<br>• Arms always grip parallel to each other
• Universal two-arm pullers<br>• Made of special steel<br>• Galvanised finish<br>• By reversing the arms, the extractor can be used internally or externally<br>• Strong design with large claw surfaces<br>• Body, arms and links are drop forged<br>• Wear-resistant, induction hardened spindles starting in size C<br>• 4532K Pair of spare arms<br>• 4532LK Pair of long spare arms<br>• 4532/S Spare spindle<br>• Large claw surfaces offer many advantages for careful and quick removal of pulleys, gears and ball bearings<br>• Externally-internally reversible by relocating arms<br>• Finish: Galvanised, with induction hardened spindle, from 4532-C, D, E, F, G and H<br>• Arms always grip parallel to each other
• Universal two-arm pullers<br>• Made of special steel<br>• Galvanised finish<br>• By reversing the arms, the extractor can be used internally or externally<br>• Strong design with large claw surfaces<br>• Body, arms and links are drop forged<br>• Wear-resistant, induction hardened spindles starting in size C<br>• 4532K Pair of spare arms<br>• 4532LK Pair of long spare arms<br>• 4532/S Spare spindle<br>• Large claw surfaces offer many advantages for careful and quick removal of pulleys, gears and ball bearings<br>• Externally-internally reversible by relocating arms<br>• Finish: Galvanised, with induction hardened spindle, from 4532-C, D, E, F, G and H<br>• Arms always grip parallel to each other
• Universal two-arm pullers<br>• Made of special steel<br>• Galvanised finish<br>• By reversing the arms, the extractor can be used internally or externally<br>• Strong design with large claw surfaces<br>• Body, arms and links are drop forged<br>• Wear-resistant, induction hardened spindles starting in size C<br>• 4532K Pair of spare arms<br>• 4532LK Pair of long spare arms<br>• 4532/S Spare spindle<br>• Large claw surfaces offer many advantages for careful and quick removal of pulleys, gears and ball bearings<br>• Externally-internally reversible by relocating arms<br>• Finish: Galvanised, with induction hardened spindle, from 4532-C, D, E, F, G and H<br>• Arms always grip parallel to each other
• Universal two-arm pullers<br>• Made of special steel<br>• Galvanised finish<br>• By reversing the arms, the extractor can be used internally or externally<br>• Strong design with large claw surfaces<br>• Body, arms and links are drop forged<br>• Wear-resistant, induction hardened spindles starting in size C<br>• 4532K Pair of spare arms<br>• 4532LK Pair of long spare arms<br>• 4532/S Spare spindle<br>• Large claw surfaces offer many advantages for careful and quick removal of pulleys, gears and ball bearings<br>• Externally-internally reversible by relocating arms<br>• Finish: Galvanised, with induction hardened spindle, from 4532-C, D, E, F, G and H<br>• Arms always grip parallel to each other
