With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible. With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation. The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. Technical specifications: Base plate material: electrolyte copper Material cover: acetal Connection terminal material: Acetal Dimensions: (LxWxH): 230 x 119 x 21 mm Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: Pressure tested: 2 bar Compatibility: Nvidia Geforce RTX 3080/3090 Scope of delivery: 1x HEATKILLER® V 1x mounting material Thermal Grizzly Kryonaut thermal paste
With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible. With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation. The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. Technical specifications: Base plate material: electrolyte copper Material cover: acetal Connection terminal material: Acetal Dimensions: (LxWxH): 230 x 119 x 21 mm Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: Pressure tested: 2 bar Compatibility: Nvidia Geforce RTX 3080/3090 Scope of delivery: 1x HEATKILLER® V 1x mounting material Thermal Grizzly Kryonaut thermal paste
With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible. With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation. The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. The integrated aRGB strips are now standard in combination with the nickel-acrylic variants. This means that the HEATKILLER® V can be perfectly integrated into the lighting concept of the computer. Technical specifications: Base plate material: nickel-plated electrolyte copper Material cover: acrylic glass Cover material: annealed stainless steel Connection terminal material: Acetal Dimensions: (LxWxH): Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: Pressure tested: 2 bar Compatibility: ZOTAC Geforce RTX 3080 Trinity ZOTAC Geforce RTX 3090 Trinity Scope of delivery: 1x HEATKILLER® V 1x HEATKILLER® LED Strip aRGB 1x mounting material Thermal Grizzly Kryonaut thermal paste
RTXLT INTPXLT Kampaania: Be greater! “With great power comes great responsibility” - Ronige Ämblikmehe kostüümi ja lennake vabalt mööda New Yorki tänavaid tänu NVIDIA RTX 30. Seeria võimekusele(RTX ja DLSS tugi) ning kogege koormat Peter Parkeri õlgadel. Täpsemad tingimused kampaanialehelt
The ROG XG Mobile reinvents external graphics by combining performance and versatility with true portability. Despite being 6% of the size of typical eGPUs, this device harnesses up to a GeForce RTX™ 3080 Laptop GPU clocked to 1810MHz at 150W with ROG Boost. Our exclusive interface avoids common bottlenecks and adds dedicated bandwidth for an integrated I/O hub. The built-in adapter powers the eGPU and laptop so you can travel light. NVIDIA GeForce RTX 3070 laptop GPU 8GB
With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible. With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation. The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. The integrated aRGB strips are now standard in combination with the nickel-acrylic variants. This means that the HEATKILLER® V can be perfectly integrated into the lighting concept of the computer. Technical specifications: Base plate material: nickel-plated electrolyte copper Material cover: acrylic glass Cover material: black anodized aluminum Connection terminal material: Acetal Dimensions: (LxWxH): Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: Pressure tested: 2 bar Compatibility: ZOTAC Geforce RTX 3080 Trinity ZOTAC Geforce RTX 3090 Trinity Scope of delivery: 1x HEATKILLER® V 1x HEATKILLER® LED Strip aRGB 1x mounting material Thermal Grizzly Kryonaut thermal paste
With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible. With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation. The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. The integrated aRGB strips are now standard in combination with the nickel-acrylic variants. This means that the HEATKILLER® V can be perfectly integrated into the lighting concept of the computer. Technical specifications: Base plate material: nickel-plated electrolyte copper Material cover: acrylic glass Cover material: annealed stainless steel Connection terminal material: Acetal Dimensions: (LxWxH): Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: Pressure tested: 2 bar Compatibility: EVGA Geforce RTX 3080 XC3 EVGA Geforce RTX 3090 XC3 Scope of delivery: 1x HEATKILLER® V 1x HEATKILLER® LED Strip aRGB 1x mounting material Thermal Grizzly Kryonaut thermal paste
With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible. With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation. The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. The integrated aRGB strips are now standard in combination with the nickel-acrylic variants. This means that the HEATKILLER® V can be perfectly integrated into the lighting concept of the computer. Technical specifications: Base plate material: nickel-plated electrolyte copper Material cover: acrylic glass Cover material: black anodized aluminum Connection terminal material: Acetal Dimensions: (LxWxH): Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: Pressure tested: 2 bar Compatibility: EVGA Geforce RTX 3080 XC3 EVGA Geforce RTX 3090 XC3 Scope of delivery: 1x HEATKILLER® V 1x HEATKILLER® LED Strip aRGB 1x mounting material Thermal Grizzly Kryonaut thermal paste
The HEATKILLER® V eBC backplate is a useful addition to the graphics card cooler of the HEATKILLER® V series. Mounted on the back of the graphics card, it improves cooling performance and increases mechanical stability. This is made possible by the use of solid black anodized aluminum. The optics are not neglected either. The backplate cools relevant components on the back of the board, including the GPU and voltage converter (VRM). Pre-cut thermal pads are included in the scope of delivery. Spacers (electrically insulating) attached to the back of the backplate ensure problem-free installation on the graphics card. The enclosed mounting material is optimized for use with a water cooler from the HEATKILLER® V series. Technical specifications: Material: anodized aluminum Dimensions: (L x W x H): Weight: 150g Compatibility: Nvidia Geforce RTX 3080 Nvidia Geforce RTX 3090 Scope of delivery: 1x HEATKILLER® V eBC - Backplate for RTX 3080/3090 - Black 1x mounting material
The HEATKILLER® V eBC backplate is a useful addition to the graphics card cooler of the HEATKILLER® V series. Mounted on the back of the graphics card, it improves cooling performance and increases mechanical stability. This is made possible by the use of solid black anodized aluminum. The optics are not neglected either. The backplate cools relevant components on the back of the board, including the GPU and voltage converter (VRM). Pre-cut thermal pads are included in the scope of delivery. Spacers (electrically insulating) attached to the back of the backplate ensure problem-free installation on the graphics card. The enclosed mounting material is optimized for use with a water cooler from the HEATKILLER® V series. Technical specifications: Material: anodized aluminum Dimensions: (L x W x H): Weight: 150g Compatible to: NVIDIA Geforce RTX 3080 NVIDIA Geforce RTX 3090 Scope of delivery: 1x HEATKILLER® V eBC - Backplate for RTX 3080/3090 - Black 1x mounting material
EK-Quantum Vector RE RTX 3080/3090 Active Backplate D-RGB - Acryl is a cutting-edge addition to the EK® Quantum Line. It is made to complement the existing EK-Quantum Vector RE RTX 3080/3090 water blocks and actively cool the backside of a reference design NVIDIA® GeForce RTX™ 3080 and 3090 GPU. EK-Quantum Vector RE RTX 3080/3090 Active Backplate EK-Quantum Vector RE RTX 3080/3090 active backplate links the water block and the active backplate part with a new terminal, which replaces the stock terminal coming with your water block. This way the whole enclosure requires only one inlet and one outlet, removing any unneeded additional tubing and reducing clutter. It is the ultimate aesthetic and performance solution that finds your GPU sandwiched between two water blocks allowing maximum cooling. The Vector Active Backplate directly cools the PCB hotspots that are found on the backside of the GPU core and the VRM (voltage regulation module). On the RX 3090, the VRAM located on the backside is cooled, while the RTX 3080 gets cooling for the PCB located around the front-mounted VRAM. Cooling liquid is channeled over all these critical areas. These newly developed active backplates feature a fin array with 6 wide channels allowing for very low flow restriction. This in turn allows overall lower temperatures, while the active backplate gets more than sufficient surface area for heat transfer. The base of the active backplate is CNC-machined out of nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. The rest of the backplate is made of nickel-plated aluminum and it does not come in contact with the liquid. These Vector Active Backplates also feature acrylic terminals that match the top cover. The watertight sealing is ensured by high-quality EPDM O-rings. D-RGB lighting on EK-Quantum Vector RE RTX 3080/3090 Active Backplate D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. This water block boasts a total of 8 individually addressable RGB LEDs, and it is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Technical Specification Dimensions: (LxHxW) - 223x124x15mm D-RGB cable length: 500mm D-RGB LED count: 8 D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) Enclosed EK-Quantum Vector RE RTX 3080/3090 Active Backplate D-RGB - Acryl Necessary mounting screws, nuts, and washers 1x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Warning: EK only guarantees compatibility with included EK-brand thermal pads. Installation process, cooling performance and block contacts are tested exclusively with EK-brand thermal pads. Listed thermal pad thicknesses apply only to EK thermal pads which are included in the package. EK does not guarantee compatibility with aftermarket alternatives for thermal interface material.
GE76 Raider is equipped with the latest 10th Gen. Intel Core i9 processors and powered by NVIDIA® GeForce RTX 30 series graphics. The latest GeForce RTX 30 series graphics pursue the highest standard and deliver the revolutionary performance of real-time ray tracing. It’s now higher than ever before and becomes more perfect. The GE76 Raider provides gamers with unprecedented gaming experience. It’s time to immerse yourself in your game. - 1TB SSD (PCIE GEN4x4 NVMe)
Sa tänad end tulevikus selle arvuti eest! See on mänguri armastus esimesest silmapilgust. HP OMEN 45L on võimas nii seest, kui ka väljast. Elegantne disain kutsub lauaarvutit vaatama ning lähemal vaatlusel selgub, et see on ka seest üks vägagi võimekas masin. HP on kasutanud selle lauaarvuti loomise juures vaid parimaid komponente ning võimaldanud Sul tulevikus neid kerge vaevaga veelgi paremate vastu vahetada. Protsessor : AMD Ryzen™ 9 5900X Videokaart : NVIDIA® GeForce RTX™ 3080 10GB Salvestusmälu/Operatiivmälu : 1 TB SSD; 32 GB RAM Op.süsteem/Ühenduvus : Win 11; Bluetooth; USB-C
GIGABYTE GeForce RTX 3080 Ti GAMING OC 12G 3 84bit 3xDP 2xHDMI LHR RTXCC Kampaania: Face Your Demons Võitle surmavate üleloomulike jõududega mängus Ghostwire: Tokyo, deemonliku invasiooniga mängus DOOM Eternal ning põrgu tumeda isandaga mängus DOOM Eternal: The Ancient Gods, mida täiustab tehisintellekti kiirendatud NVIDIA DLSS-i jõudlus ja vapustav kiirtejälitus, mida toetab NVIDIA GeForce RTX 30. seeria. Kampaania: Täpsemad tingimused kampaanialehelt
RTXCC Kampaania: Face Your Demons Võitle surmavate üleloomulike jõududega mängus Ghostwire: Tokyo, deemonliku invasiooniga mängus DOOM Eternal ning põrgu tumeda isandaga mängus DOOM Eternal: The Ancient Gods, mida täiustab tehisintellekti kiirendatud NVIDIA DLSS-i jõudlus ja vapustav kiirtejälitus, mida toetab NVIDIA GeForce RTX 30. seeria. Kampaania: Täpsemad tingimused kampaanialehelt
Kaasahaarav ekraan Peaaegu ilma raamita ja 94% ekraani ning korpuse suhtega ekraan on ülimalt kaasahaarav. Kõrge 165Hz värskendussagedus ja QHD resolutsioon pakuvad rikkalikumat ja detailiderohkemat mängupilti. Koge suurepärast värvitäpsust, mis on Pantone®-i poolt tunnustatud ja 100% DCI-P3 värviruumi, mis on ideaalne mängijatele, kes samuti ka loovad. 16:10 kuvasuhe laiendab vaatepilti, võimaldades näha veelgi enamat. Ületa kõik oma vastased Kiirus, võimsus ja kaasaskantavus on uues 2022. aasta Zephyrus M16-s saavutanud täiusliku tasakaalu. Selles üliõhukeses sülearvutis on võimas 12. põlvkonna Intel® Core™ i9-12900H protsessor koos NVIDIA® GeForce RTX™ 3080 Ti sülearvuti GPU-ga. 32GB DDR5 4800MHz muutmälu ja 1TB ülikiire PCIe® 4.0 SSD pakuvad head kiirust ja palju salvestusruumi. Ressursinõudlike rakenduste välkkiired laadimisajad muudavad mängimise ja sisu loomise kiiremaks kui kunagi varem. 16-tolline ekraan 15-tollise korpuse sees Voolujooneline disain mahutab 16-tollise ekraani 15-tollise korpuse sisse. Eelkäijatest kuni 5% kergem ja väiksem Zephyrus M16 ühendab endas täissuuruses mugavuse ja kaasaskantavuse. Prismaatiline sära Kaane punktmaatriksiga kujundus on valmistatud CNC freesimise teel. Alt särab prismakile, mis lisab peent virvendavat efekti karmi "Off-Black" korpuse taustal. Arukas jahutus parandab kasutuskogemust Vedelmetallist termiline ühend hoiab protsessori jahedana, samal ajal kui kaks ümberkujundatud Arc Flow™ ventilaatorit pöörlevad koos oma 84 labaga, et tekitada muljetavaldav õhuvool ja minimaalne müra. ROG Armory Crate tarkvara võimaldab valida erinevate arvuti töörežiimide vahel, et optimeerida jõudlust ja akustikat iga vastava ülesande jaoks. Sukeldu sügavasse helisse Voogesitus, salvestamine ja mängimine on Zephyrus M16 mitmetahulise helisüsteemiga muudetud veelgi kaasahaaravamaks. Dolby Atmos® tehnoloogia, topeltkõlarid ja võimsad bassikõlarid pakuvad kaunilt tasakaalustatud akustikat. Kohandatav 3D-mikrofoni massiiv jäädvustab selget heli erinevate stsenaariumide korral, samas kui kahesuunaline tehisintellekti mürasummutus muudab selgemaks nii sissetuleva kui ka väljamineva kõne. Kergem. Õhem. Kaasaskantavam Mängi, voogesita ja tööta ükskõik kus. Ülikiire Thunderbolt™ 4 võimaldab sul mugavalt ühendada erinevaid uuemaid seadmeid, nagu võimsad välised GPU-d või dokkimisjaamad. USB-C laadimine võimaldab arvutit laadida kaasaskantavate akupankadega, et saaksid lõpetada pistikupesa otsimise, kui aku tühjeneb. Ühenda arvuti vooluvõrgust lahti ja naudi kuni 10-tunnist juhtmevabadust. WiFi 6E abil saad kiire ja kindla ühenduse isegi ülerahvastatud võrkudes. Geeniuse vajutus Hoia madalat profiili uue Stealth Type klaviatuuriga, mis tagab alla 30dB müraga klahvivajutused. Sisesta keerulisi käske kiiresti tänu N-key Rollover funktsioonile, mis tagab, et iga vajutus registreeritakse. Navigeerimine on samuti sujuvam ja lihtsam uue puuteplaadiga, mis on eelmise põlvkonnaga võrreldes 20% suurem. Põhjalik ühenduvus Erinevad sisend-/väljundpordid hoiavad sind ühenduses ja võimaldavad sul töökana püsida olenemata asukohast. Zephyrus M16 sisaldab ülimalt mitmekülgset Thunderbolt™ 4 porti koos DisplayPort 1.4 ja Power Delivery 3.0-ga ja kahte USB 3.2 A-tüüpi porti hiire, mängupuldi ja muude tarvikute ühendamise jaoks. MicroSD kaardipesa võimaldab loojatel hõlpsasti salvestada, redigeerida ja töödelda massiivseid pilte ja videoid kõikjal.
The brand-new AORUS 17 redefines high-end gaming laptops. Combining powerful performance and mobility with the latest NVIDIA® GeForce RTX™ 30 Series Laptop GPUs, feel the power to run any AAA game smoothly. The 360Hz gaming panel with a high screen-to-body ratio, enabling gamers to be immersed in smooth, high-quality visuals akin to a movie theater or top-tier e-sports room.
MSI, number 1 mängurite bränd, laiendab piire ja suurendab Sinu võimalusterohkust! See sülearvuti on varustatud Inteli 12. generatsiooni Core i9 protsessoriga, mis teeb sellest ühe tõelise mängurile mõeldud arvuti. Lisaks veel äärmiselt võimekas nVidia RTX 30-seeria videokaart, UHD ekraan, RGB taustavalgustusega klaviatuur ja kõige uuem WiFi 6E tehnoloogia. Helikogemuse eest vastutab kuue kõlariga Dynaudio helisüsteem. See kõik on peidus elegantses premium-kvaliteediga korpuses. Operatsioonisüsteemina on kasutusel uus Windows 11 Pro, mis koostöös MSI Center eksklusiivse mängurile suunatud tarkvaraga loob suurepärase kasutuskogemuse.
The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump L x W x H 295 x 152 x 46mm Material cooler bottom Nickel plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95m Maximum flow rate 75 L/h Voltage 12V DC Power consumption 4W MTBF 50.000 h Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25mm Net weight 187g Max working temperature 60°C Compatibility: RTX 3080 TI MSI GeForce RTX 3080 Ti Suprim X MSI GeForce RTX 3080 Ti Gaming X Trio 12G RTX 3080 MSI GeForce RTX 3080 Gaming X Trio 10G, 10GB GDDR6X, HDMI, 3x DP MSI GeForce RTX 3080 Gaming Z Trio 10G, 10GB GDDR6X, HDMI, 3x DP (V389-045R) MSI GeForce RTX 3080 Gaming Z Trio 12G LHR, 12GB GDDR6X, HDMI, 3x DP (V389-402R) MSI GeForce RTX 3080 Suprim X 10G, 10GB GDDR6X, HDMI, 3x DP MSI GeForce RTX 3080 Suprim X 12G LHR, 12GB GDDR6X, HDMI, 3x DP RTX 3090 MSI GeForce RTX 3090 Gaming X Trio, 24GB GDDR6X, HDMI, 3x DP MSI GeForce RTX 3090 Suprim X 24G, 24GB GDDR6X, HDMI, 3x DP Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.
Are you a true gamer? Do you want to be able to play the latest PC game blockbusters of this year with high frame rates, mind blowing images and immersive surround sound audio? The MSI Gaming notebooks are the best weapon for you. Equipped with the MSI Gaming Notebooks will truly lift your gaming spirits. - 2TB SSD (PCIE GEN4x4 NVMe)
The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H 2 O and offers a max. air flow of 119.8m³/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump L x W x H 290 x 151 x 46 mm Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow rate 75 L/h Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H 2 O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Note: - Attention: The use of the NVLink is not possible with this AIO! Compatibility list: - EVGA GeForce RTX 3080 Ti FTW3 Ultra, 12GB GDDR6XRTX 3080 - EVGA GeForce RTX 3080 Ti FTW3 Ultra Hybrid Gaming (12G-P5-3968-KR) - EVGA GeForce RTX 3080 FTW3 Ultra Gaming, (10G-P5-3897-KR) - EVGA GeForce RTX 3080 FTW3 Gaming, (10G-P5-3895-KR) - EVGA GeForce RTX 3090 FTW3 Ultra Gaming, (24G-P5-3987-KR) - EVGA GeForce RTX 3090 FTW3 Gaming, (24G-P5-3985-KR) Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.
