Get high-performance cooling, display a favorite animated GIF or static image, monitor real-time PC performance metrics, see music that's currently playing, stream browser content and more with NZXT CAM software.2.36 diameter wide-angle LCD display with 640x640 resolution and 60 Hz refresh rate provides a sharp image from any viewing angle Screen supports the display of custom images, animated GIFs, and CAM system info with adjustable orientation Powerful Asetek pump provides optimal cooling and up to 2,800 RPM whisper-quiet operation Includes F140/F120 RGB Core fans Includes RGB Controller, RGB Fans, & USB Y-Cable Single breakout cable simplifies installation Rubber tubing is reinforced with nylon-braided sleeves to prevent leaks CAM enables display customization, fan and pump speed control, and RGB lighting effects Control custom screen content, RGB, pump speed, and zero-noise fan curves with NZXT CAM software.
Pure Loop 2 FX 280mm is the impressively high-performing and silent All-in-One water cooling unit with impressive ARGB illumination for slightly overclocked systems. Impressively high cooling performance for all consumer CPUs 2 Light Wings 140mm PWM high-speed fans offer equally high air pressure and vibrant ARGB illumination Doubly decoupled PWM pump for quiet operation and minimal vibration ARGB-PWM-Hub enables synchronization of up to 6 ARGB components and PWM fans Combination of ARGB illumination, all-black design and aluminum-style for unmistakable and stylish look Easy-to-access refill port and included coolant bottle guarantee a long lifespan PURE LOOP 2 FX 280mm Liquid, LGA1150/LGA1151/LGA1155/LGA1200/LGA1700/LGA2011-3/LGA2066/SAM4/SAM5 Fan speed 2200rpm, Fan light Noise level, max 32.8 dB, Dimensions 317 x 140 x 52mm Weight 1.29 kg
The Bitspower fittings are the ideal complement for water cooling systems. The G1/4" screw connection with union nut in shiny black is suitable for 16/10mm Soft Tubes (as well as for 16/11mm). Technical Data: Material: Nickel-Plated Brass Color: Shiny Black Thread: G1/4 Zoll Thread Length: 5 mm Tubing Size: 16/10 mm (ID 3/8", OD 1/2")
DEMCiflex Dust Filter 140mm White DF0689Toote kirjeldus inglise keeles:If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior. In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters. DEMCiflex offers a particularly easy-to-retrofit solution, which in this case is suitable for 140 mm fans. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held. The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly. Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt. Note:The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate. Technical details:Size (frame): 153 x 153 mmSize (filter): 129 x 129 mmCompatibility: 140 mm fan slotMaterial (filter): polyester meshColor: white (frame), white (filter)Mounting: magnetic bracket + mounting frameAdvantages: Fast installation No compatibility restriction Easy and quick cleaning Effective filter effect with high air permeability Durable fabric
DEMCiflex Dust Filter 140mm Round Black/White DF0495Toote kirjeldus inglise keeles:If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior. In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters. DEMCiflex offers a particularly easy-to-retrofit solution, which in this case is suitable for 140 mm fans. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held. The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly. Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt. Finally, a few notes on the installation: First, the question arises, which fans have to be covered at all. As already mentioned, this applies exclusively to the sucking fans. But which are they? The safest way to recognize this is on the fan itself, with two arrows on the outside or inside of the fan frame. If one of the two arrows points towards the interior or if the rotor suspension is aligned with the interior, this is an aspirating fan. These are usually located on the front, side and bottom, whereas the rear and cover fans usually carry the air out of the housing and therefore need not be filtered. In order to maximize the filter effect, an overpressure in the housing can be generated. This means that more volume of air is forced into the housing than is being sucked out of the housing by other fans at the same time. This prevents air (and with it the dust) from entering the interior through other openings that may not have been filtered. If all fans are the same size, you should blow more fans into the housing than pull out. In this case, the power supply is to be counted as an additional, extracting fan, as long as it does not receive its supply (fan side) directly from the outside (occurs at floor mounting). If different fans with different sizes and speeds are used, the respective air volumes (m³ / h) in the data sheets give a good reference value, whereby in turn the total volume of the suction fans must be higher than that of the blowing out fans. Note: The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate. Technical details:Size (frame): Ø approx. 152 mmSize (filter): Ø approx. 127 mmCompatibility: 140 mm fan slotMaterial (filter): polyester meshColor: black (frame), white (filter)Mounting: magnetic bracket + mounting frameAdvantages: Fast installation No compatibility restriction Easy and quick cleaning Effective filter effect with high air permeability Durable fabric
The perfect solution for perfect curves in the Alphacool HardTubes is now available. Simply slide the silicon insert into the plexiglass tube and heat up the desired section. Thanks to the extreme heat resistance of silicon, the tube can be bent without the curved section buckling. After it cools, the silicon insert can simply be pulled out. Available for tubes with 10mm, 12mm, and now 13mm inner diameters, and each size comes in 30cm length for curves in shorter tubes or 100cm length for curves in longer tubes. Technical Details Length: 30cm Thickness: 13mm Colour: blue Scope of Delivery 1x Alphacool silicon bending insert 30cm for ID 1/2” / 13mm HardTubes - blue NoticeDue to the manufacturing process, the diameter can vary by 0.5 - 1mm.
The Barrow mini Water Stop Valve is made of full metal. Its construction makes it extremely robust. The housing is made of copper and the handle is made of aluminum. The stopcock has a G1 / 4 “internal thread with a length of approx. 5mm on both sides. Technical specifications: Color: white housing / black handle Material: copper / aluminum handle Thread: 2x G1 / 4 " Thread length: 5mm Dimensions: 37.2 x 35.5 x 23mm Flow opening: 10mm Scope of delivery: Barrow mini water stop valve
This filler neck in carbon black from Bitspower is used when coolant is filled into the cooling circuit from the top of the housing. To do this, cut a small opening in the housing, place the connection through the hole or on the edge of the hole and screw it on from the other side with the screw ring. The filler neck can be connected to the cooling circuit via a normal G1/4" female thread connection. After filling, the upper side should be sealed with a sealing plug. Technical Data: Material: Brass Colour: Carbon Black Thread: Inner G1/4" Thread Length: 15 mm
This bracket from BarrowCH, made of aluminium, allows 360 radiators to be mounted at an angle other than that specified by the enclosure and sometimes even in rather unusual places, such as externally. Technical Data Material: Aluminium Color: Black Radiator compatibility: 360
With the new compression fittings from Alphacool for Plexi, brass or carbon tubes, Alphacool is taking a further step towards perfection and quality. The first two colours, chrome and deep black, offer great variety. The fully coordinated product series allows each system to shine in its own right, and individuality has no limits when paired with the Alphacool Plexi and brass tubes! The colouring is bound fast to the brass surface with a new chromatization process. This ensures the longevity of the intense colour and prevents chipping of the chrome layer. An Alphacool logo on the connector emphasizes the distinctive nature of this product once again. The Function of this Connector is:This connector is used to connect two 16mm Plexi, brass or carbon tubes at a 90° angle. Dimensions: Width: 41.5mm Height: 41.5mm Technical Details: Material: brass, chromatized Colour: deep black Scope of Delivery: 1 x Alphacool HT 13mm HardTube Compression Fitting 90° L-Connector for Plexi, brass tubes - knurled - Deep black
Full-Block-GPU-Kühler für Custom-Wasserkühlungen, für ASUS TUF GeForce RTX 3070-Grafikkarten, Deckel aus Acryl, Boden aus vernickeltem Kupfer, integrierte digitale RGB-Beleuchtung (3-Pin, 5VDG)
Backplate mit aktiver Kühlung von EK Water Blocks, für MSI Trio und Suprim 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung
Full-Cover-Waterblock von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung
LGA1150/LGA1155/LGA1156/LGA2011/LGA2066/SAM2/SAM2+/SAM3/SAM3+/SAM4/SFM1/SFM2/SFM2+, Air flow 70 cfm, Noise level, max 32.5 dB, Dimensions 160 x 120 x 75mm, Weight 0.426 kg, XC051
The nickel-plated adapter from Bitspower in matt black has a 90 degree angle and is rotatable. One side is designed for mounting hard tubes with an outside diameter of 12mm and the other side has a G1/4" external thread for mounting on radiators and Co. The two rubber rings seal the sides. Technical Data: Material: Nickel-Plated Brass Colour: Matt Black Angle: 90° Thread: G1/4 inch Connection: 1x Ø 12 mm
The Distroplate D1 was developed in cooperation with ITRaid especially for the Lian Li PC-011 Dynamic XL. It enables components such as the graphics card, processor and radiator to be connected to each other and also ensures a clean design. The D1 finds its place directly next to the IO Shield. Technical details: Dimensions without pump (W x H x D): 352 x 124 x 16 mm Colour: transparent Material: acrylic glass, plastic Connections: 7x G1/4 ports
Set aus 16 braunen Anti-Vibrations-Befestigungen (Gummi-Entkopplerstifte) von Noctua zur einseitigen und geräuschgeminderten Befestigung von Lüftern am Gehäuse, auch für Slim-Lüfter geeignet
The EK-Quantum Scalar Flow Indicator is a high-quality GPU-mounted flow indicator with addressable D-RGB illumination. It visually represents the coolant flow rate, which is often difficult to see with the naked eye. This can be very useful to immediately see if your loop is in perfect condition or if there are problems with the pump or flow. It has dedicated G1/4" inputs and outputs. It is essential to ensure that the labelled connections are connected correctly. This product is compatible with the common RGB synchronisation technologies of all major motherboard manufacturers. The anodised aluminium cover hides the LED hotspots and provides uniform illumination. Enclosed: EK-Quantum Scalar Flow Indicator Bottom-Top D-RGB - Black G1/4" nickel-plated brass plug x 1
The Protium expansion tank from Singularity Computers is a 100mm tube with a diameter of 60mm. Together with the acrylic attachments, the expansion tank reaches a height of 139mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 x 60 x 139 mm (L x W x H) Diameter: 60 mm Material: Acrylic (lid, base, reservoir), Aluminium (retention rings) Color: Silver, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 100 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
The EK-Quantum Scalar Flow Indicator is a high-quality GPU-mounted flow indicator with addressable D-RGB illumination. It visually represents the coolant flow rate, which is often difficult to see with the naked eye. This can be very useful to immediately see if your loop is in perfect condition or if there are problems with the pump or flow. It has dedicated G1/4" inputs and outputs. It is essential to ensure that the labelled connections are connected correctly. This product is compatible with the common RGB synchronisation technologies of all major motherboard manufacturers. The anodised aluminium cover hides the LED hotspots and provides uniform illumination. Enclosed: EK-Quantum Scalar Flow Indicator Bottom-Top D-RGB - Nickel G1/4" nickel-plated brass plug x 1
