The connection for 16mm (AD) Hard Tubes from EK Water Blocks, is a compression fitting made of nickel-plated brass. It is silver in colour and comes from the Torque series, which convinces with a simple and timeless design. Originally intended for the EKWB Quantum series, this fitting is also compatible with other EK products. In this fitting, the union nut serves as a compression ring, which presses the sealing ring onto the hard tube. It thus offers a higher level of safety and sealing than, for example, the fittings of the EK-HD series. As a small feature, the union nut has a recess under which coloured rings are placed, which provide a bit of individuality and are available separately. Technical Data: Material: Nickel-Plated Brass Colour: Silver Supported Tube: 16 mm OD Thread: G1/4", male Thread Length: 4,5 mm Outer Diameter (Fitting): 24 mm Installed Height: 15 mm Compatible Solid Tubing: Acrylic, PETG, Copper, Brass, Stainless Steel
Set aus 16 braunen Anti-Vibrations-Befestigungen (Gummi-Entkopplerstifte) von Noctua zur einseitigen und geräuschgeminderten Befestigung von Lüftern am Gehäuse, auch für Slim-Lüfter geeignet
Backplate für GPU-Wasserkühlung, für EK-Quantum Vector FTW3 RTX 3080/3090, aus POM Acetal, bietet erhöhte Stabilität, mit Wärmeleitpads, für aktive Kühlung des PCBs
EK-Quantum Vector Strix RX 6800/6900 is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for ROG Strix RX 6800, 6800XT, 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector Strix RX 6800/6900 water block for ROG Strix GAMING RX 6800 and 6900 GPUs EK-Quantum Vector RX 6800/6900 water block is compatible with ASUS® ROG Strix GAMING Radeon RX 6800, RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Vector Strix RX 6800/6900 D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 9 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the Strix 6800/6900 water block EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 300.5x157x19.5mm Enclosed EK-Quantum Vector Strix RX 6800/6900 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
EK-Quantum Vector Strix RX 6800/6900 is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for ROG Strix RX 6800, 6800XT, 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector Strix RX 6800/6900 water block for ROG Strix GAMING RX 6800 and 6900 GPUs EK-Quantum Vector RX 6800/6900 water block is compatible with ASUS® ROG Strix GAMING Radeon RX 6800, RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of durable black POM acetal. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Vector Strix RX 6800/6900 D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 9 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the Strix 6800/6900 water block EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 300.5x157x19.5mm Enclosed EK-Quantum Vector Strix RX 6800/6900 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
EK-Quantum Vector TRIO RTX 3080/3090 Active Backplate - Acetal ist eine hochmoderne Ergänzung der EK® Quantum Line. Sie ergänzt die bestehenden EK-Quantum Vector TRIO RTX 3080/3090 Wasserblöcke und kühlt aktiv die Rückseite aller MSI® TRIO und SUPRIM GeForce RTX™ 3080 und 3090 GPUs. Die EK-Quantum Vector TRIO RTX 3080/3090 Active Backplate wird mit einem neuen Anschluss geliefert, der den serienmäßigen Anschluss des Vector Wasserblocks ersetzt und den Wasserblock und die Vector Active Backplate zu einer Einheit verbindet. Auf diese Weise benötigt das gesamte Gehäuse nur einen Zu- und einen Abfluss, wodurch unnötige zusätzliche Schläuche entfallen und das Durcheinander reduziert wird. Es ist die ultimative ästhetische und leistungsfähige Lösung, bei der Ihre GPU zwischen zwei Wasserblöcken eingebettet ist, was eine maximale Kühlung ermöglicht. Technische Spezifikation: Abmessungen: (LxHxB) - 307x153x38mm Lieferumfang: EK-Quantum Vector TRIO RTX 3080/3090 Aktive Backplate - Acetal Erforderliche Befestigungsschrauben, Muttern und Unterlegscheiben 1x vernickelter Messingstecker G1/4" EK-Loop Multi Inbusschlüssel (6mm, 8mm, 9mm) Thermische Pads
Die CPU-Wasserblöcke der EK-Quantum Velocity² Serie beinhalten die nächste Generation der OptiFlow Kühlung. Sie verwenden eine spezielle Kombination aus Montagedruck und Coldplate-Geometrie, die auf das IHS- und Die-Layout von AMD AM4-Sockel-Prozessoren zugeschnitten ist. Dank der geringen hydraulischen Durchflussbeschränkung können diese Produkte in Setups mit schwächeren Wasserpumpen oder niedrigeren Pumpendrehzahlen für einen noch leiseren Betrieb eingesetzt werden, wobei sie dennoch Spitzenleistungen erzielen! Technische Daten: D-RGB Kabellänge: 50cm D-RGB-Anschluss: 3-poliger 5V digitaler LED-Anschluss (Pinout: +5V | Digital | Blockiert | Masse) Abmessungen: (LxHxB) - 89x113,5x34mm CPU-Sockel-Kompatibilität: AMD AM4 Lieferumfang: EK-Quantum Velocity² CPU-Wasserblock Exact Mount Universal-CPU-Montagemechanismus EK-Velocity² Rückwand 2.5mm Inbus(HEX)-Schlüssel Jetplate für AM4 Sockel CPUs Wärmeleitpaste Thermal Grizzly Hydronaut (1g)
Backplate mit aktiver Kühlung von EK Water Blocks, für MSI Trio und Suprim 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung
Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung
Kühlblock und Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung
Super silent 14cm fan with S-FLOW blades supplying 30% more airflow than a standard fan at the same speed. The greater performance combined with PWM automatic speed control allows the fan noise to be kept to a minimum.The Apache fan creates more focused airflow providing blind-spot cooling, which makes it an ideal solution for a case or heatsink fan. HDB (Hydro Dynamic) bearings extend fan life and further enhance noise reduction.It’s powerful and quiet!• Super silent APACHE BLACK 14cm fan• S-FLOW fan blade design delivers 30% higher airflow• Super silent with PWM speed control• Hydro Dynamic Bearing extends fan lifeSobilikArvuti korpusTüüpVentilaatorVentilaatori läbimõõt14 cmMüratase (suur kiirus)22,19 dBToote värvMustPinge12Kõrgus25 mmVentilaatori jõudlus89,55 cfmPistmik(ud)4pinPöörlemiskiirus1300 RPM
High-end in classic design Developed with and for the most demanding customers, the new (((NB))) Premium fan series, equipped with classic frame and rotor, combines the NB-BlackSilentPro series technology with a classic design. The high-grade NB-EKA Plus II drive system and the virtually inaudible NB-NanoSLI bearings ensure exceptionally quiet operation over the whole lifespan. Both are features which before were only available in the highly sophisticated Multiframe reference series. Besides the tasteful design in matte and high-gloss black, the BlackSilentPro fans feature individually expandable cable management and a NB-Silentframe silicone gasket as well as mounting material for vibration- and tool-free installation. Quality designed in Germany! Detailed information: High-quality fibreglass reinforced chassis in classic deign with Antidust Polycarbonate rotor Cable management, plug-in cables, 20+50cm combinable Vibration- and tool-free mounting Extremely low starting voltage Pulse-noise reduced NB-EKAPLus II Wide range drive Highest safety level: Reverse polarity and overload protection, restarting functionality, extremely fail-safe Virtually inaudible bearings Highest quality: Including mounting material and additional NB-Silentframe gasket Technical specifications: Dimensions: 92x92x25mm Colours: Black frame, transparent brown fan blades Nominal voltage: 12V Starting voltage: 5V Control range: 5-13.2V Power consumption: 0.81W Nominal speed: 1300rpm (+/- 10%) Airflow: 42m³/h / 24,7CFM Noise emissions: 14 dB(A) MTBF (25°C): 180000hrs Connector: 3-Pin Extent of delivery: 1x Fan
Es handelt sich bei dem Produkt um die neue Revision. Diese Pumpe ist weltweit die erste Pumpe, die in serienmäßig produzierten wassergekühlten Workstations eingesetzt wird, und ist ideal für die Wasserkühlung von Prozessoren und elektronischen Bauteilen geeignet. Aufgrund ihrer Baugröße und Leistung kann die darüber hinaus in einer Vielzahl von Anwendungen eingesetzt werden. Diese DC-Pumpe ist eine elektronisch kommutierte Kugelmotorpumpe, mit Laufzeiten von deutlich über 50.000 Stunden bei 12 Volt. Das einzig bewegliche Teil an einer Kugelmotorpumpe ist eine sphärisch geformte Rotor-/Laufradeinheit, die sich auf einer ultraharten, verschleißfesten Keramik-Lagerkugel abstützt. Eine konventionelle Welle mit Wellenlagern und Wellendichtungen ist nicht vorhanden. Die sphärische Lagerung der Rotor-/Laufradeinheit auf der Keramik-Lagerkugel bietet eine Vielzahl von Vorteilen: Ein Entstehen von Lagerspiel - und damit eine Geräuschzunahme - ist prinzipbedingt nicht möglich. Die Pumpe bleibt damit über die gesamte Laufzeit geräuscharm. Das Lager ist selbstnachstellend. Es wird vom Fördermedium direkt geschmiert (Nassläuferpumpe). Eine Wartung entfällt damit. Da der Rotor magnetisch immer in der vorgesehenen Lage gehalten wird, stellen kleinere Schmutzteilchen kein Problem dar. Ein Blockieren der Pumpe ist im Normalfall nicht möglich. Auch nach längerem Stillstand ist ein sicherer Anlauf gegeben. Angetrieben wird die permanentmagnetische Rotor-/ Laufradeinheit von einem Magnetfeld, das vom umliegenden Stator erzeugt wird. Dieser ist komplett um den Rotor herumgebaut. Die komplette Pumpe ist damit mit 38 mm nur wenig höher als der Stator selbst. Sie passt damit problemlos in alle handelsüblichen PC-, Barebone- und Mini-PC Gehäuse. Eine separate magnetische Abschirmung ist im Normalfall nicht notwendig. Das Kugelmotorprinzip ermöglicht einen sparsamen Betrieb mit vergleichsweise hohen Leistungen. Durch Spannungsvariation kann die DDC Gleichstrompumpe einfach und über einen großen Leistungsbereich geregelt werden. Alle medienberührenden Teile sind komplett korrosionsbeständig. Technische Daten Abmaße: (BxTxH) 62x62x38mm (Ohne Anschlüsse) Motorbauart: Elektronisch kommutierter Kugelmotor Nennspannung: 12 V DC Gleichspannung Zul. Spannungsbereich 6 bis 13,2 Volt Förderhöhe bei 12V: 3,7m max. Förderleistung: 420L/h Fördermedien: Wasser, Wasser-/Glykol-Gemische* Max. Systemtemperatur: 60° C Medienberührende Teile: Edelstahl 1.4571, PPS-GF40, EPDM O-Ringe, Aluminiumoxid, Hartkohle Anschlüsse: 2x 10/8mm Schlauchanschluss (keine Tülle notwendig) Lieferumfang: Laing DDC-Pumpe 12V DDC-1T Pumpentacho: Mit 3-Pin Molex Stecker als Pumpentachoausgang (für Mainboards oder Steuergeräte) Hinweis: Die Pumpe ist die neusten Revision. *WICHTIG: Wir empfehlen die Verwendung von schmierfähigem Wasserzusatz (wie z.B. AT Protect Plus oder Innovatek Protect). Anti-Corro-Fluid ist nicht zu empfehlen. ACHTUNG: Aufgrund der Leistung der Pumpe darf die nur in einem Kreislauf mit min. 1 Kühler betrieben werden. Beim Betrieb ohne Last kann die Pumpe durchbrennen. Important: The Laing pump's electronics are not waterproof. Please make sure that the electronic components do not come in contact with water during installation or when working on the pump. When replacing the top always ensure a proper fit of the O-ring seal and avoid spills when filling the Laing reservoir. Damages due to water in the electronic components are not replaced by Laing! Why are there Swiftech and Laing Versions? Are they different? The latter question can be answered quickly: No! Here an explanation: Lain produces all pumps in Hungary. They are just labelled differently for Overseas markets and the European market. The pumps themselves are threfore exactly identical. The overseas version has Swiftech as a distributor and the European version is neutrally black. The cheaper Swiftech pumps are usually shipped with decouplers, the Laing pumps usually not. The power, pressure head, flow rates. etc. are exactly the same. This product has been tested for you: Aquainfos Overclockingstation Userreview im Liquidluxx inkl. Video. Hardwaremax Bedienungsanleitung (DE, EN) Achtung: Pumpensteuerung durch Heatmaster möglich! Heinweis: Für die Pumpensteuerung durch den Heatmaster wird das Alphacool Pumpenadapterkabel (Artikel 52171) benötigt
Bitspower's stylish matt black ball valve stops the cooling circuit and is ideal for systems where regular conversions are required. At both ends the ball valve has two G1/4" female threads, for two suitable connections. The material is nickel-plated brass. Technical Data: Material: Nickel-Plated Brass Main Color: Matt Black Handle Color: Black Thread: Inner G1/4" x2
Low-Noise-Pumpe von Alphacool und Laing, Silbernes Messing-Gehäuse (Silver Nickel), 200 l/h und 2,44 m Förderhöhe bei 10 Watt Leistungsaufnahme, Single Edition ohne Aufsatz
Bitspower's flow sensor with G1/4" female thread connections in matt black lets the coolant flow through the flow indicator and rotates the internal black paddle wheel. The speed determined in this way is read out via the 3-pin cable on the rear and displayed, for example, via the mainboard, as with a fan. In order to achieve a more precise indication, adapters can be attached to the inlet or outlet and thus reduce the inside diameter to 8 or by 5mm. Technical Data: Material: Brass Colour: Matt Black Thread: 2x G1/4" Flow Adapter: I.D. 5 mm/ I.D. 8 mm 3-Pin Cable: 600 mm
Adressierbare Wing-Boost-3-Lüfter von Alpenföhn, Triple-Set mit 3x 120 mm, digital adressierbare RGB-LED-Beleuchtung (3-Pin), PWM-gesteuert, inklusive Fernbedienung, Empfänger, Splittern & Schrauben
The retention rings attach the tops to both ends of the acrylic tubes. As they are included as standard with the Protium reservoirs, this item serves as a replacement or to replace rings of a different colour. Technische Details Material: Aluminium Colour: Black Compatibility: Protium series Scope of delivery 2x retention ring
The retention rings attach the tops to both ends of the acrylic tubes. As they are included as standard with the Protium reservoirs, this item serves as a replacement or to exchange rings of a different colour. Technische Details Material: Aluminium Colour: Silver Compatibility: Protium series Scope of delivery 2x retention ring
Leistungsstarke AIO-Kühlung in Weiß, in Zusammenarbeit mit Roman "der8auer" Hartung, mit 360-mm-Radiator, drei Wing Boost 3 ARGB High Speed 120-mm-Lüfter, schickes Design & leiser Betrieb, mit Thermal Grizzly Hydronaut Wärmeleitpaste, kompatibel zu vielen AMD & Intel Sockeln
Leistungsstarke AIO-Kühlung in Weiß, in Zusammenarbeit mit Roman "der8auer" Hartung, mit 240-mm-Radiator, zwei Wing Boost 3 ARGB High Speed 120-mm-Lüfter, schickes Design & leiser Betrieb, mit Thermal Grizzly Hydronaut Wärmeleitpaste, kompatibel zu vielen AMD & Intel Sockeln
This is the 2nd generation Vector GPU water block from the EK® Quantum Line, designed for AORUS® Xtreme and Master RTX 3080 and 3090 graphics cards based on the latest NVIDIA® Ampere™ architecture. An EK water block for Xtreme and Master RTX 3080 and 3090 EK-Quantum Vector Xtreme 3080/3090 D-RGB - Nickel + Acetal water block is compatible with Aorus Xtreme and Master RTX 3080 and RTX 3090 graphics cards. The Vector water block actively cools the GPU, VRAM (on the front), power stages, and chokes in the VRM (voltage regulation module). These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of nickel-plated high-grade copper, while its top is CNC-machined out of durable black POM Acetal. These 2nd generation Vector GPU water blocks also feature Acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Vector Xtreme RTX 3080/3090 D-RGB water block The aesthetic corner end-piece is housing the addressable D-RGB LEDs. This water block boasts a total of 8 individually addressable RGB LEDs, and it is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the EK-Quantum Vector Xtreme 3080/3090 water block EK recommends the purchase of a retention backplate, especially for the 3090 models of graphics cards. The backplate improves the overall aesthetics of your graphics cards and also provides additional passive cooling for the GPU core, VRAM on the 3090 cards, and backside of the printed circuit board VRM section. Technical Specification Dimensions: (LxHxW) - 295x150.5x20.5mm Enclosed EK-Quantum Vector Xtreme RTX 3080/3090 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
The transparent acrylic lid fits all Protium reservoirs from Singularity. It has four G1/4" connections and, due to its design, can be integrated into the water cooling circuit in a variety of ways. Technical Data Colour: Transparent Material: Acryl Thread: 4x G1/4" Compatibility: Protium reservoir
Schicker zylindrischer Ausgleichsbehälter, Röhre und Aufsätze aus transparentem Acryl, drei Aufsätze für flexible Anschlussmöglichkeiten, silberne Sicherungsringe aus Aluminium
Create a stunning hardline custom cooling loop with the CORSAIR Hydro X Series XT Hardline Bending Kit, containing the high-quality tools you need to cut and bend 12mm or 14mm hardline tubing.
The new generation of compact fan technology is on the market. Multiframe® fans have completely unique multi-piece chassis, which eliminates vibration already inside of the fan. Therefore resonance throughout the system is reduced. Additional measures for noise reduction such as the use of decoupling kits or insulation mats can be spared with these fans. Depending on the case used, Multiframe® fans are able to reduce the fan-induced noise below the noise from the airflow itself. Multiframe® fans are than "more silent than the air". The new Multiframe® technology has a array of new features: The integrated vibration absorbers are just one of the new features that all contribute to noise reduction. For example the vibration absorbers are wider than the chassis to avoid any contact between case and vibrating parts. The use of massive and heavy materials in the fan leads to a lowering of the noise's frequencies, therefore making it less audible and more comfortable to the human ear. Aerodynamic optimization of frame and strutting also reduce noise by air swirling. This reduces a majority of the noise through airflow and therefore a large part of the overall noise level of the fan. The other parts of the Multiframe® fan series are also on the highest technological level. The improved EKAplus motor is voltage-independent extremely quiet and has an especially low starting voltage. The bearing used is the new NB-NanoSLI® bearing, which is especially quiet and has a long lifespan thanks to a special lubrication system. The fan is also equipped with a reliable auto-restart mechanism and is protected against polarity reversal. Interesting is the fact that the noise level of the Multiframe® series is almost completely dependent from the case they are installed in, as noise produced directly by the is reduced to a minimum and usually below the noise level of the airflow. Thereby these fans are more quiet than their airflow. With this new generation and advance in noise reduction more and more responsibility for noise reduction is in the hands f the case manufacturers. If full advantage is to be taken of these fans an aerodynamically optimized case has to be used, which does not obstruct airflow with tight meshes or other obstructions. Technical details: Dimensions: 80x80x25mm Speed (+- 10%): 1700rpm Airflow: 47m³/h Noise level: 14 dB(A) Voltage range: 4,5-13,8V Starting voltage: 4,5V Power consumption: 1,2W Warranty: 6 years
Toote kirjeldus inglise keeles:The Bitspower shut-off valve is the ideal extension for all water cooling systems, where regular modifications are made. Simply turn the stopcock 90 degrees to perform the required work on the watercooling. The module itself is nickel-plated and as usual provided with a discreet Bitspower lettering. The silver-black stopcock has two G1 / 4-inch female threads for the installation of two matching connections. In this version, the handle of the stopcock is made of silver. Technical details:Material: nickel-plated brassColor: Silver Black (Black Sparkle, Shut-off Tap), Silver (Silver Shining; Handle)Thread: 2x G1 / 4 inches
The Z-Multi Water Tank from Bitspower has two screw-in POM covers, one with only one G1/4" thread and the other with three G1/4" threads. In the cover, where there is only one G1/4" thread, an adapter is already screwed in, which flows in three individual jets against the reservoir when it is used as an inlet. In the cover, with three threads, a flow pipe is installed in one of the threads, which is usually used as an inlet. If the inlet starts from the upper side, i.e. on the opposite side of the flow pipe, the outlet should not be through the flow pipe, as in the case of a water level below the pipe, air would otherwise enter the cooling circuit. Two plugs are included to close the openings that are not used. One plug is shiny silver, while the other is transparent and has a hole for an optional LED illumination. Two clamps are also included to mount the reservoir to the case or something else. Technical Data: Material: Acrylic, POM Acrylic Tube Color: Clear Dimension: 120 x 60 mm (H x Φ, +/-3%) Length without Cover: 100 mm Inner Diameter: 50 mm Thread: 4x G1/4" Scope of Delivery: 1x G1/4" Silver Shining Stop Fitting, 1x G1/4" Silver Shining Aqua-Pipe I, 1x G1/4" Silver Shining Anti-Cyclone Adapter, 1x G1/4" Crystal Stop Fitting I With 5MM LED Hole, 2x Tank Clamp
